Loading [a11y]/accessibility-menu.js
A 75-Gb/s/mm2 and Energy-Efficient LDPC Decoder Based on a Reduced Complexity Second Minimum Approximation Min-Sum Algorithm | IEEE Journals & Magazine | IEEE Xplore
Scheduled Maintenance: On Tuesday, 25 February, IEEE Xplore will undergo scheduled maintenance from 1:00-5:00 PM ET (1800-2200 UTC). During this time, there may be intermittent impact on performance. We apologize for any inconvenience.

A 75-Gb/s/mm2 and Energy-Efficient LDPC Decoder Based on a Reduced Complexity Second Minimum Approximation Min-Sum Algorithm


Abstract:

This article presents a high-throughput and low-routing complexity low-density parity check (LDPC) decoder design based on a novel second minimum approximation min-sum (S...Show More

Abstract:

This article presents a high-throughput and low-routing complexity low-density parity check (LDPC) decoder design based on a novel second minimum approximation min-sum (SAMS) algorithm. The routing congestion is mitigated by reducing the required interconnections in the critical path of the routing network. The implementation and postlayout results with 28-nm 1P9M CMOS process show that the proposed design can achieve a throughput of 10.5 Gb/s for a millimeter-wave 60-GHz baseband system while satisfying the low bit error rate (BER) requirements (10-7). The proposed design reduces the wiring in the routing network by 21% and improves the area by 12% compared to the conventional min-sum (MS) and normalized MS (NMS) algorithm. Additional hardware optimizations are obtained by considering the internal message passing resolution based on the BER and signal-to-noise ratio (SNR) requirements for a practical baseband system. The power consumption is efficiently reduced by the employment of a shared address generator that exploits the degree of parallelism to reduce the switching activity on a group of memory elements. The LDPC decoder is implemented with a core area of 0.14 mm2, power consumption of 81 mW at 312.5 MHz, and the area and power efficiency of 75 Gb/s/mm2 and 10.2 pJ/bit, respectively.
Page(s): 926 - 939
Date of Publication: 17 December 2019

ISSN Information:

Funding Agency:


References

References is not available for this document.