skip to main content
10.1145/2934583.2934611acmconferencesArticle/Chapter ViewAbstractPublication PagesislpedConference Proceedingsconference-collections
research-article

Design and Implementation of a 4Kb STT-MRAM with Innovative 200nm Nano-ring Shaped MTJ

Authors Info & Claims
Published:08 August 2016Publication History

ABSTRACT

Programmability is as a severe challenge in development of spin-transfer torque magnetic random access memory (STT-MRAM). Theoretical analysis have indicated that nano-ring shaped magnetic tunneling junction (NR-MTJ) can achieve lower write current and higher write reliability compared to conventional elliptical-shaped MTJ (E-MTJ). In this work, we successfully patterned the NR-MTJ with 200nm outer diameter and 120nm inner diameter in commercial manufacturing facility, designed and fabricated a 4Kb STT-MRAM test chip with NR-MTJs. Testing results demonstrated successful read and write functionalities of our chip, and proved the theocratically-predicted electrical properties of NR-MTJs.

References

  1. R. Rodriguez, J. Stathis, B. Linder, S. Kowalczyk, C. Chuang, R. Joshi, G. Northrop, K. Bernstein, A. Bhavnagarwala, and S. Lombardo, "The impact of gate-oxide breakdown on sram stability," Electron Device Letters, vol. 23, no. 9, pp. 559--561, 2002.Google ScholarGoogle ScholarCross RefCross Ref
  2. C. Chappert, A. Fert, and F. N. Van Dau, "The emergence of spin electronics in data storage," Nature Materials, vol. 6, no. 11, pp. 813--823, 2007.Google ScholarGoogle ScholarCross RefCross Ref
  3. Z. Diao, Z. Li, S. Wang, Y. Ding, A. Panchula, E. Chen, L.-C. Wang, and Y. Huai, "Spin-transfer torque switching in magnetic tunnel junctions and spin-transfer torque random access memory," Journal of Physics: Condensed Matter, vol. 19, no. 16, p. 165209, 2007.Google ScholarGoogle ScholarCross RefCross Ref
  4. N. Edel, D. Tuteja, E. Miller, and S. Brandt, "Mramfs: a compressing file system for non-volatile ram," in International Symposium on Modeling, Analysis, and Simulation of Computer and Telecommunications Systems, pp. 596--603, 2004. Google ScholarGoogle ScholarDigital LibraryDigital Library
  5. M. Durlam, P. Naji, A. Omair, M. DeHerrera, J. Calder, J. M. Slaughter, B. Engel, N. Rizzo, G. Grynkewich, B. Butcher, C. Tracy, K. Smith, K. Kyler, J. Ren, J. Molla, W. A. Feil, R. Williams, and S. Tehrani, "A 1-mbit mram based on 1t1mtj bit cell integrated with copper interconnects," IEEE Journal of Solid-State Circuits, vol. 38, no. 5, pp. 769--773, 2003.Google ScholarGoogle ScholarCross RefCross Ref
  6. N. Rizzo, D. Houssameddine, J. Janesky, R. Whig, F. Mancoff, M. Schneider, M. DeHerrera, J. Sun, K. Nagel, S. Deshpande, H.-J. Chia, S. Alam, T. Andre, S. Aggarwal, and J. Slaughter, "A fully functional 64 mb ddr3 st-mram built on 90nm cmos technology," IEEE Transactions on Magnetics, vol. 49, no. 7, pp. 4441--4446, 2013.Google ScholarGoogle ScholarCross RefCross Ref
  7. http://www.crocus-technology.com.Google ScholarGoogle Scholar
  8. X. Han, H. Wei, Z. Peng, H. Yang, J. Feng, G. Du, Z. Sun, L. Jiang, Q. Qin, and M. Ma, "A novel design and fabrication of magnetic random access memory based on nano-ring-type magnetic tunneljunctions," Journal of Materials Sciences and Technology, vol. 23, no. 03, p. 304, 2007.Google ScholarGoogle Scholar
  9. X. F. Han, Z. C. Wen, and H. X. Wei, "Nanoring magnetic tunnel junction and its application in magnetic random access memory demo devices with spin-polarized current switching (invited)," Journal of Applied Physics, vol. 103, no. 7, 2008.Google ScholarGoogle ScholarCross RefCross Ref
  10. F. Q. Zhu, G. W. Chern, O. Tchernyshyov, X. C. Zhu, J. G. Zhu, and C. L. Chien, "Magnetic bistability and controllable reversal of asymmetric ferromagnetic nanorings," Phys. Rev. Lett., vol. 96, p. 027205, 2006.Google ScholarGoogle ScholarCross RefCross Ref
  11. W. Reohr, H. Honigschmid, R. Robertazzi, D. Gogl, F. Pesavento, S. Lammers, K. Lewis, C. Arndt, Y. Lu, H. Viehmann, R. Scheuerlein, L.-K. Wang, P. Trouilloud, S. Parkin, W. Gallagher, and G. Muller, "Memories of tomorrow," Circuits and Devices Magazine, IEEE, vol. 18, no. 5, pp. 17--27, 2002.Google ScholarGoogle ScholarCross RefCross Ref
  12. W. Zhao, T. Devolder, Y. Lakys, J.-O. Klein, C. Chappert, and P. Mazoyer, "Design considerations and strategies for high-reliable stt-mram," Microelectronics Reliability, vol. 51, no. 9, pp. 1454--1458, 2011.Google ScholarGoogle ScholarCross RefCross Ref
  13. Y. Zhang, X. Wang, Y. Li, A. K. Jones, and Y. Chen, "Asymmetry of mtj switching and its implication to stt-ram designs," in Design, Automation and Test in Europe, pp. 1313--1318, 2012. Google ScholarGoogle ScholarDigital LibraryDigital Library
  14. Y. Zhang, X. Wang, H. Li, and Y. Chen, "Stt-ram cell optimization considering mtj and cmos variations," IEEE Transactions on Magnetics, vol. 47, no. 10, pp. 2962--2965, 2011.Google ScholarGoogle ScholarCross RefCross Ref

Index Terms

  1. Design and Implementation of a 4Kb STT-MRAM with Innovative 200nm Nano-ring Shaped MTJ

      Recommendations

      Comments

      Login options

      Check if you have access through your login credentials or your institution to get full access on this article.

      Sign in
      • Published in

        cover image ACM Conferences
        ISLPED '16: Proceedings of the 2016 International Symposium on Low Power Electronics and Design
        August 2016
        392 pages
        ISBN:9781450341851
        DOI:10.1145/2934583

        Copyright © 2016 ACM

        Permission to make digital or hard copies of all or part of this work for personal or classroom use is granted without fee provided that copies are not made or distributed for profit or commercial advantage and that copies bear this notice and the full citation on the first page. Copyrights for components of this work owned by others than ACM must be honored. Abstracting with credit is permitted. To copy otherwise, or republish, to post on servers or to redistribute to lists, requires prior specific permission and/or a fee. Request permissions from [email protected]

        Publisher

        Association for Computing Machinery

        New York, NY, United States

        Publication History

        • Published: 8 August 2016

        Permissions

        Request permissions about this article.

        Request Permissions

        Check for updates

        Qualifiers

        • research-article
        • Research
        • Refereed limited

        Acceptance Rates

        ISLPED '16 Paper Acceptance Rate60of190submissions,32%Overall Acceptance Rate398of1,159submissions,34%

        Upcoming Conference

        ISLPED '24

      PDF Format

      View or Download as a PDF file.

      PDF

      eReader

      View online with eReader.

      eReader