ABSTRACT
Since the advantages of low temperature sintering of nano-silver paste, nano silver can sintering at low temperature and work at high temperatures, compared with other lead-free solders, low temperature sintering of nano-silver paste has been applied in various chip packages. In this paper, Anand viscoelastic constitutive model was adopted, and WORKBENCH software was used to simulate the hot cycle load of the array chip of nano-silver paste. The simulation results show that the after four cycles of thermal cycle load, the temperature distribution of the solder joints gradually increases from the center to the surroundings, and the solder joints at the corners have the highest temperature, so the maximum plastic strain accumulation occurred at corner solder joints. For a single solder joint, the temperature near the substrate is higher, so deformation and destroy more prone occurred at the bottom of the solder joints, which is the main two reason that may cause the failure of chip connection.
- Shenghu, Huang Zuo, Tian Minbo. The Trend Towards Lead-free in Electronic Packages and Its Choke Point [J]. ELECTRONIC COMPONENTS & MATERIALS,2004,23(03):29-31.DOI:0.3969/j.issn.1001-2028.2004.03.010.Google Scholar
- Nan, Zhang Liang. Research Progress on Lead-free Soldering Technology for Electronic Packaging[J].Materials Review,2019,33(12):3862-3875.DOI:10. 11896 /cldb. 18120017.Google Scholar
- Yingchuan, Yan Jianfeng, Zou Guisheng, Nano - silver and nano - copper mixed welding paste for electronic packaging and low - temperature sintering connection[J].TRANSACTIONS OF THE CHINA WELDING INSTITUTION,2013,34(8):17-21+11.Google Scholar
- Shuai, Ji Hongjun, Li Mingyu, Pressureless Low Temperature Sintering of Ag Nanoparticles Applied to Electronic Packaging[J]. Electronics Process Technology,2012,33(6).DOI: 10.14176/j.issn.1001-3474.2012.06.005.Google Scholar
- Zhao, liu Yang, Zhang Hao, Connection Strength and Plasticity of Multi-scale Nano-silver Sinter Joint[J].TRANSACTIONS OF THE CHINA WELDING INSTITUTION,2019,40(10):106-110.DOI:10.12073/j.hjxb.2019400271.Google Scholar
- SB, Kim KH, Anand L.An internal variable constitutive model for hot working of metals [J]. International Journal of Plasticity,1989,5(3):95-130.Google Scholar
- Xuefan, Liang Lihua, Liu Yong, Research on mechanical properties of lead-free solder and determination of ANAND constitutive parameters[J].CHINESE JOURNAL OF APPLED MECHANICS,2009,26(2):248-252+404.Google Scholar
- Li, Chen Xu, Model Predicted the Stress-strain Behavior of 63Sn37Pb Solder[J].Journal of Mechanical Strength, 2004, 26(4): 447- 450.Google Scholar
- Jihui, Hui Yang, Zhang Yang. The Research of Low Temperature Sintering Nano-sliver Paste Based on Anand Model[C].the International Symposium,2018.Google Scholar
- Yang. Influencing Factors of Fatigue Life of Nano-Silver Paste in Chip Interconnection[J].Journal of Electronic Materials,2021,50(1):224-232.DOI:10.1007/S11664-020-08501-3.Google Scholar
Index Terms
- Cycle thermal simulation of nano silver paste based on Anand model
Recommendations
The Research of Low Temperature Sintering Nano-sliver Paste Based on Anand Model
ISBDAI '18: Proceedings of the International Symposium on Big Data and Artificial IntelligenceConsidering of the advantages of low temperature sintering of nano-silver paste, compared with other lead-free solders, low temperature sintering of nano-silver paste has been applied in chip packaging. Someone conducted in-depth research on the tensile ...
Comparison of gas permeable mold with acryl substituents for silver nano-paste imprint patterning
AbstractImprint lithography technique is widely used as microfabrication technology. Imprint lithography is a contact method utilizing a fine pattern mold and prints the pattern to materials. Due to benefits of high resolution and cost ...
Graphical abstractDisplay Omitted
Highlights- Gas permeable mold from thermal cross-linked cellulose derivatives with acrylic substituents was demonstrated.
Study on low temperature sintering of nano-silver paste
ISBDAI '18: Proceedings of the International Symposium on Big Data and Artificial IntelligenceDifferent from traditional packaging materials, nano-silver has better low-temperature sintering characteristics, which meets the requirements of lead-free green environment protection, preparation of nano-silver slurry, low temperature sintering ...
Comments