ABSTRACT
Decreasing feature sizes and increasing package densities are making thermal issues extremely important in IC design. Uneven thermal maps and hot spots in ICs cause physical stress and performance degradation. Many MEMS and microfluidics-based solutions were proposed in the past. We present a cooling method based on high-speed electrowetting manipulation of discrete sub-microliter droplets under voltage control with volume flow rates in excess of 10 mL/min. We also propose a flow-rate feedback control where the hot areas get increased supply of droplets without the need for external sensors and electrothermocapillary control where hot areas attract droplets due to thermocapillarity and are returned to their reservoirs by electrowetting resulting in a self-contained and a self-regulated system.
- A. E. Bergles and A. Bar-Cohen, "Direct liquid cooling of microelectronic components," In Adv. in thermal modeling of electronic components and systems, v. 2, 241--250, 1990.Google Scholar
- J. S. Campbell Jr. et al., "Thermal management of a laptop computer with synthetic air microjets," Intersociety Conf. Thermal and Thermomechanical Phenomena in Electronic Systems, 43--50, 1998.Google Scholar
- J. S. Go et al., "Heat transfer enhancement using flow-induced vibration of a microfin array," Sensors and Actuators A 90, 232--239, 2001.Google ScholarCross Ref
- S. N. Heffington, et al., "Vibration-induced droplet atomization heat transfer cell for high-heat flux applications," Intersociety Conf. on Thermal and Thermomechanical Phenomena in Electronic Systems, 408--412, 2002.Google Scholar
- P. S. Lee et al., "Experimental study on laminar heat transfer in microchannel heat sink," Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems, 379--386, 2002.Google Scholar
- S. S. Murthy, et al., "Single chamber compact thermosyphons with micro-fabricated components," Intersociety Conf. Thermal and Thermomechanical Phenomena in Electronic Systems, pp. 321--327, 2000.Google Scholar
- P. Paik et al., "Electrowetting-based droplet mixers for microfluidic systems", Lab Chip, 3, 28--33, 2003.Google ScholarCross Ref
- K. Pettigrew, et al., "Performance of a MEMS based micro capillary pumped loop for chip-level temperature control," IEEE Int. Conf, MEMS, pp. 427--430, 2001.Google Scholar
- M. Pollack et al., "Electrowetting-based actuation of liquid droplets for microfluidic applications," Applied Physics Letters, vol. 77, no. 11, 1725--1726, 2000.Google ScholarCross Ref
- M. G. Pollack et al., "Electrowetting-based Actuation of Droplets for Integrated Microfluidics," Lab Chip, 2, 96--101, 2002.Google ScholarCross Ref
- H. Ren et al., "Micro/nano liter droplet formation and dispensing by capacitance metering and electrowetting actuation," IEEE Conf. on Nanotechnology, 369--372, 2002.Google Scholar
- D. B. Tuckerman and R.F.W. Pease, "High-performance heat sinking for VLSI," IEEE Electron Devices Letters, vol. 2, 126--129, 1981.Google ScholarCross Ref
- S. Wu et al., "Micro heat exchanger by using MEMS impinging jets," Proc. IEEE MEMS Conference, 171--176, 1999.Google Scholar
- H. Xie et al., "The use of heat pipes in personal computers," Intersociety Conf. Thermal and Thermomechanical Phenomena in Electronic Systems, pp. 442--448, 1998.Google Scholar
- S. Zeng et al., "Electroosmotic flow pumps with polymer frits," Sens. and Actuators B 82, 209--212, 2002.Google ScholarCross Ref
Index Terms
- Cooling of integrated circuits using droplet-based microfluidics
Recommendations
Adaptive cooling of integrated circuits using digital microfluidics
Thermal management is critical for integrated circuit (IC) design. With each new IC technology generation, feature sizes decrease, while operating speeds and package densities increase. These factors contribute to elevated die temperatures detrimental ...
A Digital-Microfluidic Approach to Chip Cooling
Thermal management has emerged as an increasingly important aspect of IC design. Elevated die temperatures are detrimental to circuit performance and reliability. Furthermore, hot spots due to spatially nonuniform heat flux in ICs can cause physical ...
Hybrid 3D-IC Cooling System Using Micro-fluidic Cooling and Thermal TSVs
ISVLSI '12: Proceedings of the 2012 IEEE Computer Society Annual Symposium on VLSI3D-ICs bring about new challenges to chip thermal management due to their high heat densities. Micro-channel based liquid cooling and thermal through-silicon-vias (TSVs) have been adopted to alleviate the thermal issues in 3D-ICs. Thermal TSV (which ...
Comments