A 150MS/s 10-bit MOS-inverter-based subranging analog-to-digital converter (ADC) dedicated to a high-speed low-power application is presented in this paper. A new time constant reduction technique is proposed in the multi-stage preamplifier design which aims to further increase the speed of the coarse ADC. A synchronized switch is introduced to minimize the sample-time mismatch in the interleaved architecture of fine ADCs. An internal pipelined scheme incorporating the double sampling and interleaving techniques in fine ADCs allows the ADC sample input signal to run on a consecutive clock, thus maximizing the throughput. The prototype ADC achieves 52dB SNDR for a 10MHz input frequency at 150MS/s. Without calibration, the measured differential nonlinearity (DNL) is 0.5 LSB, while the integral nonlinearity (INL) is 0.9 LSB. The CMOS ADC is fabricated in a 0.35µm CMOS technology, with an active area of 2.7mm², consuming only 178mW from a single 3V supply. Comparing technology normalized figure-of-merits, it achieves better power-speed efficiency than other similar types of ADCs.