IEICE Transactions on Electronics
Online ISSN : 1745-1353
Print ISSN : 0916-8524
Special Section on Fundamentals and Applications of Advanced Semiconductor Devices
Comparative Analysis of Bandgap-Engineered Pillar Type Flash Memory with HfO2 and S3N4 as Trapping Layer
Sang-Youl LEESeung-Dong YANGJae-Sub OHHo-Jin YUNKwang-Seok JEONGYu-Mi KIMHi-Deok LEEGa-Won LEE
Author information
JOURNAL RESTRICTED ACCESS

2012 Volume E95.C Issue 5 Pages 831-836

Details
Abstract

In this paper, we fabricated a gate-all-around bandgap- engineered (BE) silicon-oxide-nitride-oxide-silicon (SONOS) and silicon-oxide-high-k-oxide-silicon (SOHOS) flash memory device with a vertical silicon pillar type structure for a potential solution to scaling down. Silicon nitride (Si3N4) and hafnium oxide (HfO2) were used as trapping layers in the SONOS and SOHOS devices, respectively. The BE-SOHOS device has better electrical characteristics such as a lower threshold voltage (VTH) of 0.16V, a higher gm.max of 0.593µA/V and on/off current ratio of 5.76×108, than the BE-SONOS device. The memory characteristics of the BE-SONOS device, such as program/erase speed (P/E speed), endurance, and data retention, were compared with those of the BE-SOHOS device. The measured data show that the BE-SONOS device has good memory characteristics, such as program speed and data retention. Compared with the BE-SONOS device, the erase speed is enhanced about five times in BE-SOHOS, while the program speed and data retention characteristic are slightly worse, which can be explained via the many interface traps between the trapping layer and the tunneling oxide.

Content from these authors
© 2012 The Institute of Electronics, Information and Communication Engineers
Previous article Next article
feedback
Top