This paper demonstrates a PLL compiler that generates the final GDSII data from a specification of input and output frequencies with PVT corner conditions. A Pulse Width Controlled PLLs (PWPLL) is composed of digital blocks, and thus suitable for being designed using a standard cell library and being layed out with a commercially available place-and-route (P&R) tool. A PWPLL has 8 design parameters. Our PLL compiler decides the 8 parameters and confirms the PLL operation with the following functions: 1) calculates rough parameter values based on an analytical model, 2) generates SPICE and gate-level verilog netlists with given parameter values, 3) runs SPICE simulations and analyzes the waveform, to examine the oscillation frequency or the voltage of specified nodes at a given time, 4) changes the parameter values to an appropriate direction depending on the waveform analyses to obtain the optimized parameter values, 5) generates scripts that can be used in commercial design tools and invokes the tools with the gate-level verilog netlist to get the final LVS/DRC-verified GDSII data from a P&R and a verification tools, and finally 6) generates the necessary characteristic summary sheets from the post-layout SPICE simulations extracted from the GDSII. Our compiler was applied to an 0.18µm standard CMOS technology to design a PLL with 600MHz output, 600/16MHz input frequency, and confirms the PLL operation with 1.2mW power and 85µm×85µm layout area.