Top > IJAT > A System Development Approach for Electrolytic In-Process Dres ...

single-au.php

IJAT Vol.5 No.1 pp. 21-29
doi: 10.20965/ijat.2011.p0021
(2011)

Paper:

Views over last 60 days: 429

A System Development Approach for Electrolytic In-Process Dressing (ELID) Grinding

Tanveer Saleh* and Mustafizur Rahman**

*Research Chair for Advanced Manufacturing Technology, King Saud University, Riyadh 11421, Saudi Arabia

**Department of Mechanical Engineering, National University of Singapore, Singapore 119260

Received:
September 8, 2010
Accepted:
December 11, 2010
Published:
January 5, 2011
Creative Commons License
Keywords:
ELID grinding, grinding wheel monitoring, wheel truing
Abstract
This study aims to present the development and performance evaluation of an ultra-precision ELID grinding machine. The machine is a 3-axis machine, including three conventional linear axes (X, Y, and Z). On top, another rotational axis has been included to assist aspheric/spherical lens grinding. In order to introduce intelligence to the machine, several on-machine measuring systems have been developed and incorporated. In ELID grinding, pulsed DC voltage is applied to the metal-bonded diamond wheels to ensure the constant protrusion of sharp cutting grit throughout the grinding cycle. The peak dressing voltage is kept constant irrespective of the wheel sharpness in conventional ELID grinding, which may lead to over dressing of the grinding wheel. The grinding force ratio, also known as K value, is an indicator of grit sharpness. In this study, a new approach to wheel dressing is proposed: the peak dressing voltage is varied according to the change in the K value during grinding. In conventional ELID grinding, the duty ratio of the dressing power supply is kept constant throughout the grinding cycle. However, this method does not achieve grinding wheel truing, which is very important to maintaining the stability of the grinding. This research work proposes a novel approach to wheel truing by controlling the dressing voltage duty ratio for ELID grinding.
Cite this article as:
T. Saleh and M. Rahman, “A System Development Approach for Electrolytic In-Process Dressing (ELID) Grinding,” Int. J. Automation Technol., Vol.5 No.1, pp. 21-29, 2011.
Data files:
References
  1. [1] H. Ohmori and T. Nakagawa, “Analysis of Mirror Surface Generation of Hard and Brittle Materials by ELID (Electronic In-Process Dressing) Grinding with Superfine Grain Metallic Bond Wheels,” Annals of CIRP, 44/1/, pp. 287-290, 1995.
  2. [2] B. P. Bandyopadhyay, H. Ohmori, and I. Takahashi, “Efficient and stable grinding of ceramics by electrolytic in-process dressing (ELID),” J. of Materials Processing Technology, Vol.66, pp. 18-24, 1997.
  3. [3] B. P. Bandyopadhyay and H. Ohmori, “The effect of ELID grinding on the flexural strength of silicon nitride,” Int. J. of Machine Tools & Manufacture, Vol.39, pp. 839-853, 1999.
  4. [4] K. Katahira, H. Ohmori, Y. Uehara, and M. Azuma, “ELID grinding characteristics and surface modifying effects of aluminum nitride (AlN) ceramics,” Int. J. of Machine Tools & Manufacture, Vol.45, pp. 891-896, 2005.
  5. [5] K. Katahira, Y. Watanabe, H. Ohmori, and T. Kato, “ELID grinding and tribological characteristics of TiAlN film,” Int. J. of Machine Tools & Manufacture, Vol.42, pp. 1307-1313, 2002.
  6. [6] C. Zhang, H. Ohmori, T. Kato, and N. Morita, “Evaluation of surface characteristics of ground CVD-SiC using cast iron bond diamond wheels,” J. of the Int. Societies for Precision Engineering and Nanotechnology, Vol.25, pp. 56-62, 2001.
  7. [7] J. Qian, W. Li, and H. Ohmori, “Cylindrical grinding of bearing steel with electrolytic in-process dressing,” Precision Engineering, Vol.24, pp. 153-159, 2000.
  8. [8] M. M. Islam, A. Senthil Kumar, S. Balakumar, H. S. Lim, and M. Rahman, “Performance evaluation of a newly developed electrolytic system for stable thinning of silicon wafers,” Thin Solid Films, Vol.504, pp. 15-19, 2006.
  9. [9] D. Kramer and F. Rehsteiner, “ECD (Electrochemical In-Process Controlled Dressing) a new method for grinding of modern high performance cutting materials to highest quality,” Annals of the CIRP Vol.48/1, pp. 265-268, 1999.
  10. [10] I. D. Marinescu, “Tribology of abrasive machining process,” p. 135, 2004.

Creative Commons License  This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Apr. 19, 2024