Top > IJAT > Influences on Occurrence of Magnetism During Cutting Processes

single-au.php

IJAT Vol.5 No.3 pp. 294-299
doi: 10.20965/ijat.2011.p0294
(2011)

Paper:

Views over last 60 days: 409

Influences on Occurrence of Magnetism During Cutting Processes

Dirk Bähre*, Kirsten Trapp*, and Ralf Tschuncky**

*Institute of Production Engineering, Saarland University, Campus A4.2, 66123 Saarbrücken, Germany

**Fraunhofer Institute of Non-Destructive Testing (IZFP), Campus E3.1, 66123 Saarbrücken, Germany

Received:
January 28, 2011
Accepted:
March 6, 2011
Published:
May 5, 2011
Creative Commons License
Keywords:
cutting, milling, metal, magnetism
Abstract
Workpieces from ferromagnetic materials influenced by machining can build magnetic fields, which can cause problems in production or application. One of the assumed causes of magnetism occurring in cutting processes is the change in the material structure due to the impact of the tool. To study these influences, milling tests are carried out. The magnetic field is measured by means of sensors functioning on the basis of the Hall effect. The coherences between geometry, kinematics, technological parameters, time dependency, and the magnetisation characteristics of the workpiece are considered.
Cite this article as:
D. Bähre, K. Trapp, and R. Tschuncky, “Influences on Occurrence of Magnetism During Cutting Processes,” Int. J. Automation Technol., Vol.5 No.3, pp. 294-299, 2011.
Data files:
References
  1. [1] D. Bähre, D. Becker, and R. Tschuncky, “Analysis of Influences on Occurrence of Magnetism During Cutting Processes,” Proc. of 4th CIRP Int. Conf. on HPC, Vol.1, pp. 19-22, 2010.
  2. [2] B. D. Cullity and C. D. Graham, “Introduction to Magnetic Materials,” 2nd ed., New York, Wiley & Sons,
    ISBN 978-0-471-47741-9,
    2009.
  3. [3] A. E. Berkowitz and E. Kneller, “Magnetism and Metallurgy,” Vol.1 & 2, New York, London, Academic Press,
    ISBN 12-091701-7,
    1969.
  4. [4] H. Kronmüller and S. Parkin, “Handbook of Magnetism and Advanced Magnetic Materials,” 1st ed., New York, Wiley & Sons,
    ISBN 0-470-02217-5,
    2007.
  5. [5] E. D. Torre, “Magnetic Hysteresis,” New York, IEEE Press,
    ISBN 0-7803-4719-6,
    1999.
  6. [6] T. Eyrisch, T. Hielscher, and J. Aurich, “Dem Magnetismus auf der Spur,” Werkstatt und Betrieb, Vol.10/2009, pp. 70-72, 2009.

Creative Commons License  This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Apr. 22, 2024