Green Modular Design by the Concept of Chemical Activation Energy

Shana S. Smith; Wei-Zhe Wang

doi:10.20965/ijat.2014.p0716

single-au.php

« previous

IJAT Vol.8 No.5 pp. 716-722

doi: 10.20965/ijat.2014.p0716

(2014)

Paper:

Views over last 60 days: 910

Green Modular Design by the Concept of Chemical Activation Energy

Shana S. Smith and Wei-Zhe Wang

Department of Mechanical Engineering, National Taiwan University, No.1, Sec.4, Roosevelt Road, Taipei 10617, Taiwan (R.O.C)

Received:

April 8, 2014

Accepted:

August 4, 2014

Published:

September 5, 2014

Keywords:

green design, modular design, chemical activation energy

Abstract

Due to increasing environmental concerns, natural resource use must become more efficient. As a result, green design is now an important research topic. The goal of this study was to create a green modular design method using the concept of chemical activation energy. The method uses five product functions and five product attributes that affect green performance to group parts into functional modules and then group parts into green modules within each functional module. Considering both product functions and environmental factors ensures the functional feasibility of the modules that are created and also improves the green performance of the product. The method developed in this study was used to group parts into functional modules and green modules for an LCD monitor. The study results can be used to help designers create new green products or improve the green performance of existing products.

Cite this article as:

S. Smith and W. Wang, “Green Modular Design by the Concept of Chemical Activation Energy,” Int. J. Automation Technol., Vol.8 No.5, pp. 716-722, 2014.

Data files:

References

[1] S. Smith and C. Yen, “Green product design through product modularization using atomic theory,” Robotics and Computer-Integrated Manufacturing, Vol.26, pp. 790-798, 2010.
[2] M. Bovea and B.Wang, “Redesign methodology for developing environmentally conscious products,” Int. J. of Production Research, Vol.45, No.18-19, pp. 4057-4072, 2007.
[3] C. L. Yang, H. K. Hsu, and C. L. Huang, “A study on green based collaborative product design,” 2010 IEEE Int. Conf. on Management of Innovation and Technology (ICMIT), 5-01-505.
[4] P. Ranky, “Sustainable green product design and manufacturing/assembly systems engineering principles and rules with examples,” 2010 IEEE Int. Symp. on Sustainable Systems and Technology (ISSST).
[5] C. Wang, P. Lin, and T. Chang, “Green quality function development and modular DSM in product development,” Int. Conf. on Computer Supported Cooperative Work in Design, 2010.
[6] H. Tseng, C. Chang, and J. Li., “Modular design to support green life-cycle engineering,” Expert Systems with Applications, Vol.34, pp. 2524-2537, 2008.
[7] S. Yu, Q. Yang, J. Tao, X. Tian, and F. Yin, “Product modular design incorporating life cycle issues – Group Genetic Algorithm (GGA) based method,” J. of Cleaner Production, Vol.19, pp. 1016-1032, 2011.
[8] Q. Yang, S. Yu, and A. Sekhari, “A modular eco-design method for life cycle engineering based on redesign risk control,” The Int. J. of Advanced Manufacturing Technology, Vol.56, pp. 1215-1233, 2011.
[9] P. Gu, M. Hashemian, and S. Sosale, “An integrated modular design methodology for life-cycle engineering,” Annals of the CIRP, Vol.46, Issue 1, pp. 71-74, 1997.
[10] Y. Umeda, S. Fukushige, K. Tonoike, and S. Kondoh, “Product modularity for life cycle design,” CIRP Annals – Manufacturing Technology, Vol.57, pp. 13-16, 2008.
[11] S. Fukushige, Y. Inoue, K. Tonoike, and Y. Umeda, “Design methodology for modularity based on life cycle scenario,” Int. J. of Automation Technology, Vol.3, No.1, 2009.
[12] N. Tchertchian, D. Millet, and O. Pialot, “Modular grouping exploration to design remanufacturable products,” Proc. of the 18th CIRP Int. Conf. on Life Cycle Engineering, Braunschweig, Germany, pp. 413-418, 2010.
[13] X. Lai and J. Gershenson, “DSM-based product representation for retirement process-based modularity,” Int. Design Engineering Technical Conf., 2009.
[14] P. Newcomb, B. Bras, and D. Rosen, “Implication of modularity on product design for the life cycle,” Int. Design Engineering Technical Conf., 1996.
[15] P. Gu and S. Sosale, “Product modularization for life cycle engineering,” Robotics and Computer Integrated Manufacturing, Vol.15, pp. 387-401, 1999.
[16] J. Zhang, W.Wang, and S. Cao, “Module design based on life cycle design,” Advanced Materials Research, Vol.228-229, pp. 158-161, 2011.
[17] T. A. W. Jarratt, “A model-based approach to support the management of engineering change,” Cambridge University, Ph.D. Thesis, 2004.
[18] Y. T. Tsai and K. S. Wang, “The development of modular-based design in considering technology complexity,” European of Operational Research, Vol.119, pp. 692-703, 1999.
[19] A. Ericsson and G. Erixon, “Controlling design variants: Modular product platforms,” 1999.
[20] H. Lee, “Optimized recycling process for LCD products,” National Cheng Kung University, Department of Resources Engineering, M.S. Thesis, 2006.

This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

[1] [1] S. Smith and C. Yen, “Green product design through product modularization using atomic theory,” Robotics and Computer-Integrated Manufacturing, Vol.26, pp. 790-798, 2010.

[2] [2] M. Bovea and B.Wang, “Redesign methodology for developing environmentally conscious products,” Int. J. of Production Research, Vol.45, No.18-19, pp. 4057-4072, 2007.

[3] [3] C. L. Yang, H. K. Hsu, and C. L. Huang, “A study on green based collaborative product design,” 2010 IEEE Int. Conf. on Management of Innovation and Technology (ICMIT), 5-01-505.

[4] [4] P. Ranky, “Sustainable green product design and manufacturing/assembly systems engineering principles and rules with examples,” 2010 IEEE Int. Symp. on Sustainable Systems and Technology (ISSST).

[5] [5] C. Wang, P. Lin, and T. Chang, “Green quality function development and modular DSM in product development,” Int. Conf. on Computer Supported Cooperative Work in Design, 2010.

[6] [6] H. Tseng, C. Chang, and J. Li., “Modular design to support green life-cycle engineering,” Expert Systems with Applications, Vol.34, pp. 2524-2537, 2008.

[7] [7] S. Yu, Q. Yang, J. Tao, X. Tian, and F. Yin, “Product modular design incorporating life cycle issues – Group Genetic Algorithm (GGA) based method,” J. of Cleaner Production, Vol.19, pp. 1016-1032, 2011.

[8] [8] Q. Yang, S. Yu, and A. Sekhari, “A modular eco-design method for life cycle engineering based on redesign risk control,” The Int. J. of Advanced Manufacturing Technology, Vol.56, pp. 1215-1233, 2011.

[9] [9] P. Gu, M. Hashemian, and S. Sosale, “An integrated modular design methodology for life-cycle engineering,” Annals of the CIRP, Vol.46, Issue 1, pp. 71-74, 1997.

[10] [10] Y. Umeda, S. Fukushige, K. Tonoike, and S. Kondoh, “Product modularity for life cycle design,” CIRP Annals – Manufacturing Technology, Vol.57, pp. 13-16, 2008.

[11] [11] S. Fukushige, Y. Inoue, K. Tonoike, and Y. Umeda, “Design methodology for modularity based on life cycle scenario,” Int. J. of Automation Technology, Vol.3, No.1, 2009.

[12] [12] N. Tchertchian, D. Millet, and O. Pialot, “Modular grouping exploration to design remanufacturable products,” Proc. of the 18th CIRP Int. Conf. on Life Cycle Engineering, Braunschweig, Germany, pp. 413-418, 2010.

[13] [13] X. Lai and J. Gershenson, “DSM-based product representation for retirement process-based modularity,” Int. Design Engineering Technical Conf., 2009.

[14] [14] P. Newcomb, B. Bras, and D. Rosen, “Implication of modularity on product design for the life cycle,” Int. Design Engineering Technical Conf., 1996.

[15] [15] P. Gu and S. Sosale, “Product modularization for life cycle engineering,” Robotics and Computer Integrated Manufacturing, Vol.15, pp. 387-401, 1999.

[16] [16] J. Zhang, W.Wang, and S. Cao, “Module design based on life cycle design,” Advanced Materials Research, Vol.228-229, pp. 158-161, 2011.

[17] [17] T. A. W. Jarratt, “A model-based approach to support the management of engineering change,” Cambridge University, Ph.D. Thesis, 2004.

[18] [18] Y. T. Tsai and K. S. Wang, “The development of modular-based design in considering technology complexity,” European of Operational Research, Vol.119, pp. 692-703, 1999.

[19] [19] A. Ericsson and G. Erixon, “Controlling design variants: Modular product platforms,” 1999.

[20] [20] H. Lee, “Optimized recycling process for LCD products,” National Cheng Kung University, Department of Resources Engineering, M.S. Thesis, 2006.