Using Automatic Calibration with Microscopic Traffic Simulation

Iisakki Kosonen

doi:10.20965/jaciii.2008.p0106

single-jc.php

« previous

JACIII Vol.12 No.2 pp. 106-110

doi: 10.20965/jaciii.2008.p0106

(2008)

Paper:

Views over last 60 days: 556

Using Automatic Calibration with Microscopic Traffic Simulation

Iisakki Kosonen

Helsinki University of Technology, P.O.box 2100, 02015 TKK, Finland

Received:

May 31, 2007

Accepted:

September 12, 2007

Published:

March 20, 2008

Keywords:

traffic simulation, automatic calibration, error-function

Abstract

The microscopic simulation is getting increasingly common in traffic planning and research because of the detailed analysis it can provide. The drawback of this development is that the calibration and validation of such a detailed simulation model can be very tedious. This paper summarizes the research on automatic calibration of a high-fidelity micro-simulation (HUTSIM) at the Helsinki University of Technology (TKK). In this research we used ramp operation as the case study. The automatic calibration of a detailed model requires a systematic approach. A key issue is the error-function, which provides a numeric value to the distance between simulated and measured results. Here we define the distance as combination of three distributions namely the speed distribution, gap distribution and lane distribution. We developed an automated environment that handles all the necessary operations. The system organizes the files, executes the simulations, evaluates the error and generates new parameter combinations. For searching of the parameter space we used a genetic algorithm (GA). The overall results of the research were good demonstrating the potential of using automatic processes in both calibration and validation of simulation models.

Cite this article as:

I. Kosonen, “Using Automatic Calibration with Microscopic Traffic Simulation,” J. Adv. Comput. Intell. Intell. Inform., Vol.12 No.2, pp. 106-110, 2008.

Data files:

References

[1] I. Kosonen, “HUTSIM – Urban Traffic Simulation and Control Model: Principles and Applications,” Doctoral thesis, Helsinki University of Technologies, Transportation Engineering Publications 100, Espoo, 1999.
[2] F. Davidsson, I. Kosonen, and A. Gutowski, “TPMA-Traffic Performance on Major Arterials,” Royal Institute of Technology, Centre for Traffic Simulation Research, Stockholm, 2002.
[3] T. Ma and B. Abdulhai, “Genetic algorithm-based optimization approach and generic tool for calibrating traffic microscopic simulation parameters,” Transportation Research Record No.1800, Transportation Research Board, pp. 6-15, Washington D.C., 2002.
[4] D. E. Goldberg, “Genetic Algorithms in Search, Optimization, and Machine Learning,” Addison-Wesley, Reading, Massachusset, 1989.
[5] D. E. Goldberg, “Sizing Populations for Serial and Parallel Genetic Algorithms,” J. David Schaffer (Ed.), Proc. of the Third Int. Conf. on Genetic Algorithms, San Mateo, California, USA, Morgan Kaufmann Publishers, 1989.
[6] C. A. Coello and G. T. Pulido, “Multiobjective Optimization using a Micro-Genetic Algorithm,” SECTOR Lee et al. (Eds.), Proc. of the Genetic and Evolutionary Computation Conf., San Francisco, California, USA, Morgan Kaufmann Publishers, 2001.
[7] D. E. Goldberg and J. Richardson, “Genetic algorithms with sharing for multimodal function optimization,” J. J. Grefenstette (Ed.), Proc. of the Second Int. Conf. on Genetic Algorithms and their Application, Hillsdale, New Jersey, USA, Lawrence Erlbaum Associates, 1987.
[8] K. Rasheed, “Guided crossover: A new operator genetic algorithm based optimization,” Proc. of the Congress on Evolutionary Computation, 1999.
[9] L. Chabredier and R. David, “Programming book for HUTMAT,” Helsinki University of Technology, Laboratory of Transportation Engineering, Espoo, April, 2003.

This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

[1] [1] I. Kosonen, “HUTSIM – Urban Traffic Simulation and Control Model: Principles and Applications,” Doctoral thesis, Helsinki University of Technologies, Transportation Engineering Publications 100, Espoo, 1999.

[2] [2] F. Davidsson, I. Kosonen, and A. Gutowski, “TPMA-Traffic Performance on Major Arterials,” Royal Institute of Technology, Centre for Traffic Simulation Research, Stockholm, 2002.

[3] [3] T. Ma and B. Abdulhai, “Genetic algorithm-based optimization approach and generic tool for calibrating traffic microscopic simulation parameters,” Transportation Research Record No.1800, Transportation Research Board, pp. 6-15, Washington D.C., 2002.

[4] [4] D. E. Goldberg, “Genetic Algorithms in Search, Optimization, and Machine Learning,” Addison-Wesley, Reading, Massachusset, 1989.

[5] [5] D. E. Goldberg, “Sizing Populations for Serial and Parallel Genetic Algorithms,” J. David Schaffer (Ed.), Proc. of the Third Int. Conf. on Genetic Algorithms, San Mateo, California, USA, Morgan Kaufmann Publishers, 1989.

[6] [6] C. A. Coello and G. T. Pulido, “Multiobjective Optimization using a Micro-Genetic Algorithm,” SECTOR Lee et al. (Eds.), Proc. of the Genetic and Evolutionary Computation Conf., San Francisco, California, USA, Morgan Kaufmann Publishers, 2001.

[7] [7] D. E. Goldberg and J. Richardson, “Genetic algorithms with sharing for multimodal function optimization,” J. J. Grefenstette (Ed.), Proc. of the Second Int. Conf. on Genetic Algorithms and their Application, Hillsdale, New Jersey, USA, Lawrence Erlbaum Associates, 1987.

[8] [8] K. Rasheed, “Guided crossover: A new operator genetic algorithm based optimization,” Proc. of the Congress on Evolutionary Computation, 1999.

[9] [9] L. Chabredier and R. David, “Programming book for HUTMAT,” Helsinki University of Technology, Laboratory of Transportation Engineering, Espoo, April, 2003.