single-jc.php

JACIII Vol.21 No.2 pp. 337-341
doi: 10.20965/jaciii.2017.p0337
(2017)

Short Paper:

Study of the Relationship Between Sit-to-Stand Activity and Seat Orientation

Chikamune Wada* and Shuichi Ino**

*Graduate School of Life Science and Systems Engineering, Kyushu Institute of Technology
2-4 Hibikino, Wakamatsu-ku, Kitakyushu, Fukuoka 808-0196, Japan

**National Institute of Advanced Industrial Science and Technology
Tsukuba, Ibaraki 305-8566, Japan

Received:
September 6, 2016
Accepted:
December 5, 2016
Online released:
March 15, 2017
Published:
March 20, 2017
Keywords:
sit to stand, EMG, seat orientation
Abstract
Sit-to-stand (STS) activity from a chair is an important motion in daily life. Some commercial products assist with STS activity in toilet use. These products control seat orientation by changing three parameters, i.e., seat height, tilt, and shift in a forward-backward direction. The reason for selection of these three parameters for seat orientation control has not been reported. Moreover, there are no reports on the best combination of these parameters. Therefore, in this study, we investigated the relationship between ease of STS activity and seat orientation during STS activity. We found that seat tilting provided good support for STS activity when the seat was in a high position (0.55 m), and shifting the seat forward provided good support for STS activity when the seat was higher than 0.45–0.55 m.
Cite this article as:
C. Wada and S. Ino, “Study of the Relationship Between Sit-to-Stand Activity and Seat Orientation,” J. Adv. Comput. Intell. Intell. Inform., Vol.21 No.2, pp. 337-341, 2017.
Data files:
References
  1. [1] M. Fujisawa, H. Nagashima, and T. Kikuchi, “The Ergonomics evaluation of a rising aided chair,” Research Vulletin of the Iwate Industrial Research Institute, Vol.9, pp. 80-82, 2002 (in Japanese).
  2. [2] S. Kawagoe, N. Tajima, and E. Chosa, “Biomechanical analysis of effects of foot placement with varying chair height on the motion of standing up,” J. Orthop. Sci, Vol.5, pp. 124-133, 2000.
  3. [3] M. Takahashi and R. Nanba, “Analysis and improvement of standing-up action for elderly people from a chair using a cushion-type support tool,” Computer Technology and application, Vol.3, pp. 713-722, 2012.
  4. [4] C. Wada, T. Oda, Y. Tomiyama and S. Ino, “A study of the relationship between sit-to-stand activity and seat orientation,” Proc. of 19th Triennial Congress of the IEA, Paper ID:828, 2015.
  5. [5] S. Tanaka, N. Kito, K. Tokumori, and T. Yamasaki, “Three demensional motion analysis of sit-to-stand in healthy individuals,” Iyou Kougaku Zasshi, Vol.2, pp. 11-15, 2008 (in Japanese).
  6. [6] K. Taniuchi, “Influences of different chair seating postures, that effects standing movements and standing postures,” Japanese J. of occupational medicine and traumatology, Vol.55, pp. 85-94, 2007 (in Japanese).

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Apr. 22, 2024