Paper:
Views over last 60 days: 380
Position Estimation Method for Wheeled Mobile Robot by Integrating Laser Navigation and Dead Reckoning Systems
Masafumi Hashimoto*, Fuminori Oba*, Yasushi Fujikawa**,
Kazutoshi Imamaki***, and Tetsuo Nishida****
* Faculty of Engineering, Hiroshima University, 4-1, 1-chome, Kagamiyama, Higashi-Hiroshima, Hiroshima, 739 Japan
** Sanyo Electric Co., Ltd., 1-1-1, Sakata, Oizumi-machi, Ora-Gun, Gumma, 370-05 Japan
*** Shimizu Corp., 2-3-10, Seavan South, Shibaura, Minato-ku, Tokyo, 105-07 Japan
**** Shin Nippon Koki Co., Ltd. 2-500-1, Takao, Sakai, Osaka, 593 Japan
Received:November 15, 1995Accepted:November 25, 1995Published:February 20, 1996
Keywords:Mobile robot, Dead reckoning, Laser navigation, Sensor integration, Kalman filter
Abstract
This paper describes a position estimation method for a wheeled mobile robot by integrating information in an odometric dead reckoning and a laser navigation system. Dead reckoning regularly gives the robot positions by the rotational counts of the two side wheels. The laser navigation system successively observes the bearing angles relative to the corner cube reflectors fixed in the robot environment. The chi-squared hypothesis testing is applied to reliably identify the corner cubes. The identified angle measurements modify the robot positions calculated by the dead reckoning based on the Extended Kalman filtering. A plant model is introduced from the kinematic equation concerning the dead reckoning, which-regards both the robot position and the wheel’s radius as state variables and the encoder measurement as an input variable. A measurement model is built concerning the bearing to a corner cube reflector in the environment observed by the scanned laser. The proposed method enables the robot to accurately estimate its position even under uncertainty of the wheel’s radius and the robot motion with slippage in a cluttered environment. The simulation and experimental results justify the proposed method.
Cite this article as:M. Hashimoto, F. Oba, Y. Fujikawa, K. Imamaki, and T. Nishida, “Position Estimation Method for Wheeled Mobile Robot by Integrating Laser Navigation and Dead Reckoning Systems,” J. Robot. Mechatron., Vol.8 No.1, pp. 93-103, 1996.Data files:
