Development of a Forging Type Rapid Prototyping System; Automation of a Free Forging and Metal Hammering Working

Hidetake Tanaka; Naoki Asakawa; Masatoshi Hirao

doi:10.20965/jrm.2005.p0523

single-rb.php

« previous

JRM Vol.17 No.5 pp. 523-528

doi: 10.20965/jrm.2005.p0523

(2005)

Paper:

Views over last 60 days: 404

Development of a Forging Type Rapid Prototyping System; Automation of a Free Forging and Metal Hammering Working

Hidetake Tanaka^*, Naoki Asakawa^, and Masatoshi Hirao^

^*Division of Innovative Technology and Science, Graduate School of Natural Science and Technology, Kanazawa University, Kakuma-machi, Kanazawa City, Ishikawa, Japan

^**Graduate School of Natural Science and Technology, Kanazawa University, Kakuma-machi, Kanazawa City, Ishikawa, Japan

Received:

April 28, 2005

Accepted:

August 3, 2005

Published:

October 20, 2005

Keywords:

CAD/CAM, rapid prototyping, metal hammering, incremental forming

Abstract

The forging rapid prototyping we proposed based on CAD data involves numerically controlled free forging and metal hammer working as new three-dimensional modeling. Almost all products are now designed and developed using CAD/CAM, and rapid prototyping using CAD data is also used to model design previews or mock ups. Free forging and plastic working, however, have few ways to automate the process. We developed numerical controlled free forging and metal hammer working as new modeling for rapid prototyping. Experimental results demonstrate that our proposal provides feasible three-dimensional modeling as rapid prototyping.

Cite this article as:

H. Tanaka, N. Asakawa, and M. Hirao, “Development of a Forging Type Rapid Prototyping System; Automation of a Free Forging and Metal Hammering Working,” J. Robot. Mechatron., Vol.17 No.5, pp. 523-528, 2005.

Data files:

References

[1] J. A. Schey, and P. W. Wallace, “Advances in Machine Tool Design and Research,” p. 1361, Pergamon Press, 1968.
[2] P. K. Wright, D. A. Bourne, J. P. Colyer, G. S. Schatz, and J. A. E. Isasi, “Flexible Manufacturing Cell for Swaging,” MECHANICAL ENGINEERING, pp. 76-83, 1982.
[3] N. Nakajima, T. Tohdo, Y. Kishi, and K. Hongo, Bull. of JSPE, 13-1.
[4] J. P. Kruth, M. C. Leu, and T. Nakagawa, “Progress in Additive Manufactureing and Rapid Prototyping,” Annals of the CIRP, Vol.47/2/1998, pp. 525-540.
[5] T. Nakagawa, K. Suzuki, and H. Noguchi, “Application of Laser Beam Maching into the Manufacturing of Blanking tool,” Proc. of 4th ICTP Tokyo, Aug., 1980, pp. 820-825.

This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

[1] [1] J. A. Schey, and P. W. Wallace, “Advances in Machine Tool Design and Research,” p. 1361, Pergamon Press, 1968.

[2] [2] P. K. Wright, D. A. Bourne, J. P. Colyer, G. S. Schatz, and J. A. E. Isasi, “Flexible Manufacturing Cell for Swaging,” MECHANICAL ENGINEERING, pp. 76-83, 1982.

[3] [3] N. Nakajima, T. Tohdo, Y. Kishi, and K. Hongo, Bull. of JSPE, 13-1.

[4] [4] J. P. Kruth, M. C. Leu, and T. Nakagawa, “Progress in Additive Manufactureing and Rapid Prototyping,” Annals of the CIRP, Vol.47/2/1998, pp. 525-540.

[5] [5] T. Nakagawa, K. Suzuki, and H. Noguchi, “Application of Laser Beam Maching into the Manufacturing of Blanking tool,” Proc. of 4th ICTP Tokyo, Aug., 1980, pp. 820-825.

Development of a Forging Type Rapid Prototyping System; Automation of a Free Forging and Metal Hammering Working

Hidetake Tanaka*, Naoki Asakawa**, and Masatoshi Hirao**

Hidetake Tanaka^*, Naoki Asakawa^, and Masatoshi Hirao^