Top > JRM > Characteristics of Frictional Sliding Motion in Releasing Mani ...

single-rb.php

JRM Vol.18 No.1 pp. 26-35
doi: 10.20965/jrm.2006.p0026
(2006)

Paper:

Views over last 60 days: 371

Characteristics of Frictional Sliding Motion in Releasing Manipulation

Chi Zhu*, Yasumichi Aiyama**, Tamio Arai***, and Atsuo Kawamura*

*Department of Electrical and Computer Engineering, Faculty of Engineering, Yokohama National University, 79-5 Tokiwadai, Hodogaya-ku, Yokohama 240-8501, Japan

**Institute of Engineering Mechanics and Systems, Tsukuba University

***Department of Precision Engineering, School of Engineering, The University of Tokyo

Received:
March 28, 2005
Accepted:
July 5, 2005
Published:
February 20, 2006
Creative Commons License
Keywords:
frictional sliding, trajectory, final motion, releasing manipulation, initial velocity
Abstract
Focusing on freely frictional sliding motion and based on mathematical analysis and physical concepts, it is clarified that the translational and rotational motions stop simultaneously, and the direction of final motion depends on the final configuration and geometric properties of an object but is independent of initial velocity. One extreme case of initially translation-dominant motion is intensively investigated with simplified approach. A series of important properties and motion monotonicity of sliding motion are obtained. Based on the above results, an inverse problem to determine the necessary initial translational and rotational velocity becomes very easy and straightforward.
Cite this article as:
C. Zhu, Y. Aiyama, T. Arai, and A. Kawamura, “Characteristics of Frictional Sliding Motion in Releasing Manipulation,” J. Robot. Mechatron., Vol.18 No.1, pp. 26-35, 2006.
Data files:
References
  1. [1] C. Zhu, Y. Aiyama, T. Chawanya, and T. Arai, “Releasing Manipulation,” Proc. IEEE/RSJ Int. Conf. On Intelligent Robots and System, pp. 911-916, 1996.
  2. [2] C. Zhu, Y. Aiyama, and T. Arai, “The Experimental Characteristics of Releasing Manipulation,” Proceedings of 3rd Asian Conference on Robotics and its Application, pp. 911-916, 1997.
  3. [3] C. Zhu, Y. Aiyama, and T. Arai, “Releasing Manipulation with Learning Control,” Proceedings of IEEE International Conference on Robotics and Automation, pp. 2793-2798, 1999.
  4. [4] C. Zhu, Y. Aiyama, T. Arai, and A. Kawamura, “Motion Characteristics in Releasing Manipulation,” Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 1969-1974, 2000.
  5. [5] C. Zhu, Y. Aiyama, T. Arai, and A. Kawamura, “Frictoinal Sliding Motion in Releasing Manipulation,” Advanced Robotics, Vol.19, No.2, pp. 141-169, 2005.
  6. [6] W. H. Huang, E. P. Krotkov, and M. T. Mason, “Impulsive Manipulation,” Proc. IEEE Int. Conf. on Robotics and Automation, pp. 120-125, 1995.
  7. [7] W. H. Huang, and M. T. Mason, “Experiments in Impulsive Manipulation,” Proc. IEEE Int. Conf. on Robotics and Automation, pp. 1077-1082, 1998.
  8. [8] W. H. Huang, and M. T. Mason, “Mechanics, Planning, and Control for Tapping,” International Journal of Robotics Research, Vol.19, No.20, pp.883-894, October, 2000.
  9. [9] C. B. Partridge, and M. W. Spong, “Control of Planar Rigid Body Sliding with Impacts and Friction,” International Journal of Robotics Research, pp. 336-348, April, 2000.
  10. [10] M. W. Spong, “Impact Controllability of an Air Hockey Puck,” Systems and Control Letters, Vol.42, pp. 333-345, 2001.
  11. [11] M. T. Mason, “Mechanics and Planning of Manipulator Pushing Operations,” International Journal of Robotics Research, Vol.5, No.3, pp. 53-71, Fall, 1986.
  12. [12] K. M. Lynch, and M. T. Mason, “Stable Pushing: Mechanics, Controllability, and Planning,” The International Journal of Robotics Research, Vol.15, No.6, pp. 533-556, December, 1996.
  13. [13] M. Kurisu, and T. Yoshikawa, “Tracking Control for an Object in Pushing Operation,” Journal of Robotic Systems, Vol.14, No.10, pp. 729-739, 1997.
  14. [14] N. Sawasaki, M, Inaba, and H. Inoue, “Tumbling Objects Using a Multi-Fingered Robot,” Proceedings of 20th International Symposium on Industrial Robots, pp. 609-616, 1989.
  15. [15] Y. Aiyama, M. Inaba, and H. Inoue, “Pivoting: A New Method of Gras-pless Manipulation of Object by Robot Fingers,” Proceedings of IEEE/RSJ International Conference on Intelligent Robots and System, pp. 136-143, 1993.
  16. [16] E. Horiuchi, and K. Tani, “Skill Discovery in Catching a Flying Ball,” Proceedings of the 13th Annual Conference of the Robotics Society of Japan, pp. 649-650, 1995 (in Japanese).
  17. [17] E. W. Aboaf, C. G. Atkeson, and D. J. Reinkensmeyer, “Task-Level Robot Learning,” Proceedings of IEEE International Conference on Robotics and Automation, pp. 1309-1310, 1988.
  18. [18] E. W. Aboaf, S. M. Drucker, and C. G. Atkeson, “Task-Level Robot Learning: Juggling a Tennis Ball More Accurately,” Proceedings of IEEE International Conference on Robotics and Automation, pp. 1290-1295, 1989.
  19. [19] S. Schaal, and C. G. Atkeson, “Open Loop Stable Strategies for Robot Juggling,” Proceedings of IEEE International Conference on Robotics and Automation, pp. 913-918, 1993.
  20. [20] R. L. Andersson, “Understanding and Applying a Robot Ping-Pong Player’s Expert Controller,” Proceedings of IEEE International Conference on Robotics and Automation, pp. 1284-1289, 1989.
  21. [21] K. Voyenli, and E. Eriksen, “On the Motion of an Ice Hockey Puck,” American Journal of Physics, Vol.53, No.12, December, 1985.
  22. [22] S. Goyal, A. Ruina, and J. Papadopoulos, “Planar sliding with dry friction. Part 1. Limit surface and moment function,” Wear, Vol.143, pp. 307-330, 1991.
  23. [23] S. Goyal, A. Ruina, and J. Papadopoulos, “Planar sliding with dry friction. Part 2. Dynamics of motion,”Wear, Vol.143, pp. 331-352, 1991.
  24. [24] Y. Wang, and M. T. Mason, “Two-dimensional Rigid-Body Collisions With Friction,” Journal of Applied Mechanics, Vol.59, pp. 635-642, Sept., 1992.
  25. [25] W. Goldsmith, “Impact: The Theory and Physical Behavior of Colliding Solids,” 1960.

Creative Commons License  This article is published under a Creative Commons Attribution-NoDerivatives 4.0 Internationa License.

Copyright© 2006 by Fuji Technology Press Ltd. and Japan Society of Mechanical Engineers. All right reserved.

*This site is desgined based on HTML5 and CSS3 for modern browsers, e.g. Chrome, Firefox, Safari, Edge, Opera.

Last updated on Apr. 22, 2024