Int J Performability Eng ›› 2021, Vol. 17 ›› Issue (2): 191-199.doi: 10.23940/ijpe.21.02.p3.191199
• Orginal Article • Previous Articles Next Articles
Fatma Zohra Labadliaa, *, Elias Hadjadj Aoula, Brahim Hamaidia, and Mohammed Bougofab
Contact:
* Corresponding author. E-mail address: Fatma Zohra Labadlia, Elias Hadjadj Aoul, Brahim Hamaidi, and Mohammed Bougofa. Optimization of Safety Instrumented System Configuration based on Simplex Algorithm [J]. Int J Performability Eng, 2021, 17(2): 191-199.
Add to citation manager EndNote|Reference Manager|ProCite|BibTeX|RefWorks
1. Y. Wang. M.Rausand., “Reliability analysis of safety-instrumented systems operated in high-demand mode”, Journal of Loss Prevention in the Process Industries, vol 32, pp.254-264, 2014. 2. F. Innal, M. A. Lundteigen, Y. Liu,A. Barros., “PFDavg generalized formulas for SIS subject to partial and full periodic tests based on multi-phase Markov models”, Reliability Engineering and System Safety, vol.150, pp. 160-170, 2016. 3. A. Bouafia, M. Bougofa, M. Rouainia,M. S. Medjram, “ Safety Risk Analysis and Accidents Modeling of a Major Gasoline Release in Petrochemical Plant”. Journal of Failure Analysis and Prevention.Vol.20, pp.358-369 ,2020. 4. D. Macii,S. Dalpez “A safety instrumented system for rolling stocks: Methodology, design process and safety analysis”, Measurement , vol.67, pp.164-176, 2015. 5. R. Ouache, A.A. Adham., “Safety Instrumented Systems between Reliability and Fuzzy”, International Journal of Information Systems and Engineering , Vol. 2, April 2014. 6. E. Nasimi, H. A. Gabbar., “ Application of Safety Instrumented System (SIS) approach in older nuclear power plants”, Nuclear Engineering and Design, vol.301, pp.1-14, 2016 7. J. Kallrath, “Solving Planning and Design Problems in the Process Industry Using Mixed Integer and Global Optimization”, Annals of Operations Research, vol.140, pp.339-373, 2005. 8. H. Jin., M. A. Lundteigen,M. Rausand, “New PFH formulasfor k-out-of-n:F-systems”, Reliability Engineering and System Safety, vol.111, pp.112-118, 2013. 9. A. Zhang, A. Barros, Y.Liu,” Performance analysis of redundant safety instrumented systems subject to degradation and external demands”, Journal of Loss Prevention in the Process Industries, 2019. 10. H. Meng, L. Kloul, A. Rauzy, “Modeling patterns for reliability assessment of safety instrumented systems”, Reliability Engineering and System Safety, vol.180, pp.111-123, 2018. 11. M. Sharifi, T. A. Moghaddam, M. Shahriari,”Multi-objective Redundancy Allocation Problem with weighted-k-out-of-n subsystems”, Heliyon, vol.5, 2019. 12. L. F.Oliveira R. N.Abramovitch, “Extension of ISATR84.00.02 PFD equations to KooN architectures”, Reliability Engineering and System Safety, vol.95,pp. 707-715, 2010. 13. H. Jahanian., “Generalizing PFD formulas of IEC 61508 for KooN configurations”, ISA Transactions, vol.55, pp.168-174, 2015. 14. Y.F. Khalil., “New statistical formulations for determination of qualification test plans of safety instrumented systems (SIS) subject to low/high operational demands”, Reliability Engineering and System Safety , vol.189, pp.196-209, 2019. 15. L. Ding, H. Wang, A. Xu, S. Li,” New considerations for SIL verification of functional safety fieldbus communication”, Journal of Loss Prevention in the Process Industries, vol.43 pp.488-502, 2016. 16. W. He, X. Wang, K. Qiu, J. Zhu, W. Huang., “Architecture design and safety research of a double-triple-channel redundant and fault-tolerant system”, Journal of Loss Prevention in the Process Industries, vol.44, pp.495-502, 2016. 17. H. J. Pasman, “Risk informed resource allocation policy: safety can save costs”, Journal of Hazardous Materials, vol.71, pp.375-394, 2000. 18. J. de Lira-Flores, A.López-Molina, R. Vázquez-Román, V. Carreto-Vázquez, M. Sam Mannan, “A formulation to optimize the risk reduction process based on LOPA”, Journal of Loss Prevention in the Process Industries, vol.26, pp.489-494, 2013. 19. T. Mertz, S. Serra, A. Henon, J.M. Reneaume, “A MINLP optimization of the configuration and the design of a district heating network: study case on an existing site”, Energy Procedia, vol.116, pp.236-248, 2017. 20. J. de Lira-Flores, R.Vázquez-Román, A. López-Molina, M. Sam Mannan., “A MINLP approach for layout designs based on the domino hazard index”, Journal of Loss Prevention in the Process Industries, vol.30, pp.219-227, 2014. 21. Y. Redutskiy, “Modelling and Design of Safety Instrumented Systems for Upstream Processes of Petroleum Sector”, 7th International Conference on Engineering, Project, and Production Management, Procedia Engineering, vol.182, pp.611-618, 2017. 22. Y.Ye, I. E. Grossmann, J.M. Pinto, S. Ramaswamy, “Markov Chain MINLP Model for Reliability Optimization of System Design and Maintenance”, the 13th International Symposium on Process Systems Engineering - PSE, 2018. 23. F. Innal, Y. Dutuit, M. Chebila, “Safety and operational integrity evaluation and design optimization of safety instrumented systems”, Reliability Engineering and System Safety, vol.134, pp.32-50, 2015. 24. A.C.Torres-Echeverrı´a, S.Martorell, H.A.Thompson, “ Multi-objective optimization of design and testing of safety instrumented systems with MooN voting architectures using a genetic algorithm Reliability”, Engineering and System Safety, vol.106, pp.45-60, 2012. 25. A.C.Torres-Echeverrıa., S.Martorell ., H.A.Thompson., “ Modeling safety instrumented systems with MooN voting architectures addressing system reconfiguration for testing”, Reliability Engineering and System Safety, vol.96, pp.545-563, 2011. 26. A.C.Torres-Echeverrı´a, S.Martorell., H.A. Thompson, ”Design optimization of a safety-instrumented system based on RAMS+C addressing IEC61508 requirements and diverse redundancy”, Reliability Engineering and System Safety, vol.94, pp.162-179, 2009. 27. J. A.de Lira-Flores, A. López-Molina, C. Gutiérrez-Antonioa., R. Vázquez-Románc, “Optimal plant layout considering the safety instrumented system design for hazardous equipment”, Process Safety and Environmental Protection, vol.124 , pp.97-120, 2019. 28. S. Basu, “Plant Hazard Analysis and Safety Instrumentation Systems”, 2nd edition Fiona Geraghty, 2017. 29. F. Innal, “Contribution to modelling safety instrumented systems and to assessing their performance Critical analysis of IEC 61508 standard” ,doctorate THESIS ,University of Bordeaux, 2008. 30. Functional safety of electrical/electronic/programmable electronic safety related systems, IEC61508, Parts 2, 2nded. Parts 2, 2nded.Geneva: International Electrotechnical Commission, 2010. 31. H. Jin, M. A. Lundteigen, M. Rausand, “Reliability performance of safety instrumented systems: A common approach for both low-and high-demand mode of operation”, Reliability Engineering and System Safety, vol.96, pp.365-372 , 2011. 32. Appendix 5 of the standard: Functional safety of electrical/electronic/programmable electronic safety related systems, IEC61508, Parts 5, 2nded.ppendix 5 of the standard: Functional safety of electrical/electronic/programmable electronic safety related systems, IEC61508, Parts 5, 2nded.Geneva: International Electrotechnical Commission; 2010. 33. X. Zhao., O. Malasse., G. Buchheit,“Verification of safety integrity level of high demand system based on Stochastic Petri Nets and Monte Carlo Simulation”, Reliability Engineering and System Safety, vol.184, pp.258-265, 2019. 34. P. Hokstad,”Demand rate and risk reduction for safety instrumented systems Reliability”, Engineering and System Safety, vol.127, pp.12-20, 2014. 35. S. Li, C. Xue, ”Birnbaum importance analysis of supply chain fault risks based on binary decision diagram” , Procedia manufacturing, vol30, pp.106-111, 2019. 36. K. H. Borgwardt, “ The Simplex Method: A Probabilistic Analysis , Algorithms and Combinatorics”, Editorial Board R.L. Graham, Murray Hill B. Korte, Bonn L. Lovasz, Budapest ,Mathematics Subject Classification 1980. 37. I. Maros, “Computational Techniques of The Simplex Method”, 1st edition, Softcover reprint of the hardcover, 2003. |
[1] | Me Me Khaing and N. Jeyanthi. EDocDeDup: Electronic Document Data Deduplication Towards Storage Optimization [J]. Int J Performability Eng, 2023, 19(7): 471-480. |
[2] | Linkai Chen, Honghui Fan, and Hongjin Zhu. Multi-Objective Optimization of Cancer Treatment Using the Multi-Objective Grey Wolf Optimizer (MOGWO) [J]. Int J Performability Eng, 2023, 19(7): 481-490. |
[3] | Yassine Eddouh, Abdelmajid Daya, Rabie Elotmani, and Abdelhamid Touache. Optimization Approaches for Cost Reduction in Preventive Maintenance Strategies: A Comparative Study [J]. Int J Performability Eng, 2023, 19(6): 359-367. |
[4] | Arvind Kumar Mishra, Renuka Nagpal, Kirti Seth, and Rajni Sehgal. A Framework to Evaluate Maintainability of Service-oriented Architecture using Fuzzy [J]. Int J Performability Eng, 2023, 19(6): 379-387. |
[5] | Yassine Eddouh, Abdelmajid Daya, Rabie Elotmani, and Abdelhamid Touache. Imperfect Maintenance Model for Optimizing Air Compressor Availability [J]. Int J Performability Eng, 2023, 19(4): 263-272. |
[6] | Ashima Arya and Sanjay Kumar Malik. An Improved Firefly-Based Feature Selection Method for Software Fault Identification and Classification [J]. Int J Performability Eng, 2023, 19(11): 744-752. |
[7] | Jinxin Wang, Zhiping Zhai, Yuezheng Lan, Xiaoyi Zhai, and Lixiang Zhao. Reliability Analysis and Optimization of Forage Crushers Based on Bayesian Network [J]. Int J Performability Eng, 2023, 19(10): 700-709. |
[8] | Eshan Misra and Vibhuti. Microgrid Fuel Cost Optimization Considering Economic Emission using Whale Cat Hybrid Technique [J]. Int J Performability Eng, 2022, 18(7): 502-511. |
[9] | Poonam Narang, Ajay Vikram Singh, and Himanshu Monga. Hybrid Metaheuristic Approach for Detection of Fake News on Social Media [J]. Int J Performability Eng, 2022, 18(6): 434-443. |
[10] | Sanjay Razdan, Himanshu Gupta, and Ashish Seth. A Multi-Layer Feed Forward Network Intrusion Detection System using Individual Component Optimization Methodology for Cloud Computing [J]. Int J Performability Eng, 2022, 18(11): 781-790. |
[11] | Ruiqi Wang, Guangyu Chen, Na Liang, Zheng Huang. Preventive Maintenance Optimization Regarding Large-Scale Systems based on the Life-Cycle Cost [J]. Int J Performability Eng, 2021, 17(9): 766-778. |
[12] | S. Anbazhagan, and S. Karthikumar. Multilevel Image Threshold Estimation using Teaching Learning-based Optimization [J]. Int J Performability Eng, 2021, 17(7): 638-646. |
[13] | D.P. Tripathi, Mahesh Nayak, Rajaboina Manoj, Surarapu Sudheer, and K. Praghash. Fast Computational Efficient Directional Shrinking Search Optimization Algorithm [J]. Int J Performability Eng, 2021, 17(6): 543-551. |
[14] | Ngangbam Phalguni Singh, Sabbisetty Akhil, Ratakonda Vishnu, K. Kirit Redddy, B. Bhanu Prakash, and Shruti Suman. Investigation of Growth Management and Field Optimization on IOT-based Technology for Chilli Cultivation: Hybrid Chilli (F1 Golden Parrot) in Pallavolu, Nellore [J]. Int J Performability Eng, 2021, 17(6): 559-568. |
[15] | Saurav Shekhar Kar and Lal Bahadur Roy. Reliability Analysis of a Finite Slope Considering the Effects of Soil Uncertainty [J]. Int J Performability Eng, 2021, 17(5): 473-483. |
|