Reference Hub6
Asynchronous Hard Real Time Signals Transmission in Embedded Networks

Asynchronous Hard Real Time Signals Transmission in Embedded Networks

Liudmila Koblyakova, Yuriy Sheynin, Elena Suvorova
Copyright: © 2014 |Volume: 5 |Issue: 4 |Pages: 21
ISSN: 1947-3176|EISSN: 1947-3184|EISBN13: 9781466654228|DOI: 10.4018/IJERTCS.2014100102
Cite Article Cite Article

MLA

Koblyakova, Liudmila, et al. "Asynchronous Hard Real Time Signals Transmission in Embedded Networks." IJERTCS vol.5, no.4 2014: pp.24-44. http://doi.org/10.4018/IJERTCS.2014100102

APA

Koblyakova, L., Sheynin, Y., & Suvorova, E. (2014). Asynchronous Hard Real Time Signals Transmission in Embedded Networks. International Journal of Embedded and Real-Time Communication Systems (IJERTCS), 5(4), 24-44. http://doi.org/10.4018/IJERTCS.2014100102

Chicago

Koblyakova, Liudmila, Yuriy Sheynin, and Elena Suvorova. "Asynchronous Hard Real Time Signals Transmission in Embedded Networks," International Journal of Embedded and Real-Time Communication Systems (IJERTCS) 5, no.4: 24-44. http://doi.org/10.4018/IJERTCS.2014100102

Export Reference

Mendeley
Favorite Full-Issue Download

Abstract

Nowadays in the aerospace industry the router-based onboard embedded networks gradually replacing bus-based networks because they are already not satisfy the aerospace performance requirements. The SpaceWire, GigaSpaceWire and SpaceFibre standards are developing to meet the increasing aerospace requirements. The important requirement for any aerospace embedded onboard network is a transmission of control information and system signals in hard real time. These signals can be synchronous and asynchronous, periodic and aperiodic, with or without acknowledges. The distributed interrupt mechanism is used for asynchronous signal transmission and it is included into the second edition of SpaceWire standard. The Time-code propagation mechanism is used for synchronous signal transmission in SpaceWire. The broadcast messages mechanism is used for transmission of different system signal in SpaceFibre but it does not quite meet the requirements of hard real time. In this paper the authors consider the asynchronous signals transmission with and without acknowledges. The aims of this paper are following: 1) theoretically investigate the distributed interrupt mechanism; 2) to prove its properties; 3) to specify parameters and limitations; 4) to derive the time characteristics. For these purpose the authors developed the analytical model which describe the distributed interrupt propagation mechanism in terms of the graph theory.

Request Access

You do not own this content. Please login to recommend this title to your institution's librarian or purchase it from the IGI Global bookstore.