Papers Papers/2022 Papers Papers/2022

Research.Publish.Connect.

Paper

Authors: Květoslav Belda 1 ; Pavel Píša 1 ; 2 and Štěpán Pressl 1 ; 2

Affiliations: 1 Department of Adaptive Systems, The Czech Academy of Sciences, Institute of Information Theory and Automation, Pod Vodárenskou věží 4, 182 00 Prague 8, Czech Republic ; 2 Department of Control Engineering, Czech Technical University in Prague, Faculty of Electrical Engineering, Karlovo náměstí 13, 120 00 Prague 2, Czech Republic

Keyword(s): BLDC/PMSM Drives, Motion Control, Power Supply, Mechatronic Systems, PysimCoder, Real-Time Generated Code, NuttX RTOS, Piezoelectric Bender Actuators, Rapid Prototyping.

Abstract: This paper deals with the design and construction of an open-software and open-hardware motion control unit intended for experimental development and rapid prototyping of advanced drive control for mechatronic systems and robotic applications such as smart production lines, manipulators, and robotic machine tools. The control unit is designed for high dynamic drives, both modern permanent magnet synchronous motors and piezoelectric drives and actuators promising for the near future. The concept and construction of the considered control unit are presented both from the hardware and software point of view. This includes custom printed circuit boards, electronic components for communication and power outputs, the microcontroller, firmware as well as software used to generate control application code. The presented experimental research and development is illustrated by figures and records of measured data.

CC BY-NC-ND 4.0

Sign In Guest: Register as new SciTePress user now for free.

Sign In SciTePress user: please login.

PDF ImageMy Papers

You are not signed in, therefore limits apply to your IP address 18.227.13.192

In the current month:
Recent papers: 100 available of 100 total
2+ years older papers: 200 available of 200 total

Paper citation in several formats:
Belda, K., Píša, P. and Pressl, Š. (2024). Motion Control Unit Design for Control Prototyping of Modern BLDC/PMSM Drives and Piezo Actuators. In Proceedings of the 21st International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO; ISBN 978-989-758-717-7; ISSN 2184-2809, SciTePress, pages 579-590. DOI: 10.5220/0012999300003822

@conference{icinco24,
author={Květoslav Belda and Pavel Píša and Štěpán Pressl},
title={Motion Control Unit Design for Control Prototyping of Modern BLDC/PMSM Drives and Piezo Actuators},
booktitle={Proceedings of the 21st International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO},
year={2024},
pages={579-590},
publisher={SciTePress},
organization={INSTICC},
doi={10.5220/0012999300003822},
isbn={978-989-758-717-7},
issn={2184-2809},
}

TY - CONF

JO - Proceedings of the 21st International Conference on Informatics in Control, Automation and Robotics - Volume 1: ICINCO
TI - Motion Control Unit Design for Control Prototyping of Modern BLDC/PMSM Drives and Piezo Actuators
SN - 978-989-758-717-7
IS - 2184-2809
AU - Belda, K.
AU - Píša, P.
AU - Pressl, Š.
PY - 2024
SP - 579
EP - 590
DO - 10.5220/0012999300003822
PB - SciTePress