Abstract
The theoretical foundations that were developed and validated in a research work in order to the conceptual design systematizing of complex systems or processes, are presented in this paper. From the earliest design stages, two approaches of concurrent engineering, the Initial Specification and Conceptual Design, were integrated, the design for functionality (DFF) and design for environment (DFE). The obtained results are significant and novelty, because they determined the formal and heuristic required knowledge to the conceptual design systematizing. On the other hand, this work defined the nature and architecture of the required prototype software. The proposed foundations were validated on the conceptual design cases of the bulk solids handling and primary processing continuous system due to the obtained solutions with prescribed methodology were satisfactory, it was verified that the development foundations are rights.
Preview
Unable to display preview. Download preview PDF.
Similar content being viewed by others
References
French, M.J.: Engineering Design, The Conceptual Stage. Heneiman, London (1981)
Pahl, G., Beitz, W.: Engineering Design. In: Wallace, K. (ed.) A Systematic Approach, Springer, Heidelberg (1984)
VDI 2221, Sheet 1.: Systematic Approach to Design of Technical Systems and Products. VDI-Verlag, pp-1-32 (1987)
Chacrabarti, A., Bligh, P.: An Approach to Functional Synthesis of Solutions in Mechanical Conceptual Design. Part I. Research in Engineering Design 6, 127–141 (1994)
Cabarrocas, J., Riba, C.: Contribuciones a la síntesis funcional de sistemas mecánicos en la Fase de Diseño Conceptual. Actas del XIII Congreso Nacional de Ingeniería de Proyectos 2, 734–741 (1997)
Cabarrocas, J., Riba C.: Evaluación de los modelos de representación de la estructura funcional de los sistemas mecánicos para su modularización. Bilbao, Anales de Ingeniería Mecánica, XII Congreso Nacional de Ingeniería mecánica de España (1997)
Cabarrocas, J., Riba, C.: Caracterización de los modos de operación de las máquinas como base para la estructuración de sus sistemas de accionamiento. Terrassa, Anales de Ingeniería Mecánica, XII Congreso Nacional de Ingeniería mecánica de España. Año 12, Vol. 1, pp. 232 – 237 (1998)
Joan, C.: Disseny Conceptual basat en la síntesi funcional de sistemes dáccionament amb multiples modes d’operació. Barcelona, Universidad Politécnica de Cataluña (1999)
Chew, M., Shen, S., Issa, G., Issa, G.: Kinematics structural synthesis of mechanims using knowledge – based systems. ASME 117, 96–103 (1995)
Chiredast, M., Gea, H.C., Kikuchi, N.: Structural configuration examples of an integrated optimal design process. ASME 116, 997–1004 (1996)
Dixon, J.R.: On research towards a scientific theory of engineering design. Artificial Intelligence for Engineering Design Analysis and manufacturing 1(3) (1987)
Dixon, J.R.: Knowledge-Based Systems for Design. ASME 117, 11–16 (1995)
Finger, S., Dixon, J.R.: A review of research in mechanical engineering design. Part I. Research in Engineering Design 1(1), 51–67 (1989)
Finger, S., Dixon, J.R.: A review of research in mechanical engineering design. Part II. Research in Engineering Design 1(1), 121–137 (1989)
Suh, N.P.: Principles of Design. Oxford United Press, Oxford (1990)
Maury, H., Cabarrocas, J.: y Riba C.: Aplicación de las técnicas de Ingeniería Concurrente al Diseño Mecánico. Terrassa, Anales de Ingeniería Mecánica, XIII Congreso Nacional de Ingeniería Mecánica de España. Año 12, Vol. 1, pp. 359 –367 (1998)
Maury, H.: Aportaciones metodológicas al diseño conceptual: Aplicación a los sistemas continuos de manipulación y procesamiento primario de materiales a granel. Tesis Doctoral, Universidad Politécnica de Cataluña (2000)
Chacrabarti, A., Bligh, P.: An Approach to Functional Synthesis Solutions in Mechanical Conceptual Design. Part II. Research in Engineeering Design 8, 52–62 (1996)
Chacrabarti, A., Bligh, P.: An Approach to Functional Synthesis Solutions in Mechanical Conceptual Design. Part III. Research in Engineeering Design 2, 116–124 (1996)
Chacrabarti, A., Bligh, P.: An Approach to Functional Synthesis of Mechanical Design Concepts. Research in Engineering Design 10, 313–331 (1996)
Riba, C.: Diseño Concurrente. Barcelona, Edicions UPC (2002)
Kusiak, A., Szcerbicki: A formal approach to specification in conceptual design. ASME 114, 659–665 (1992)
Kusiak, A., Larson, N.: Decomposition and Representation Methods in Mechanical Design. ASME 117, 17–24 (1995)
Kusiak, A., Wang, J.: Decomposition of design process. ASME 115, 687–695 (1993)
Graedel, T.E., Allenby, B.R.: Design For Environment. Prentice Hall, Upper Saddle River (1996)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2005 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Ramírez, H.M., Romeva, C.R. (2005). Theoretical Foundations for Knowledge-Based Conceptual Design of Complex Systems. In: Luo, Y. (eds) Cooperative Design, Visualization, and Engineering. CDVE 2005. Lecture Notes in Computer Science, vol 3675. Springer, Berlin, Heidelberg. https://doi.org/10.1007/11555223_19
Download citation
DOI: https://doi.org/10.1007/11555223_19
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-28948-7
Online ISBN: 978-3-540-31976-4
eBook Packages: Computer ScienceComputer Science (R0)