Abstract
A set of finite elements (FEs) is formulated to analyze wave propagation through inhomogeneous material when subjected to mechanical, thermal loading or piezo-electric actuation. Elastic, thermal and electrical properties of the materials are allowed to vary in length and thickness direction. The elements can act both as sensors and actuators. These elements are used to model wave propagation in functionally graded materials (FGM) and the effect of inhomogeneity in the wave is demonstrated. Further, a surface acoustic wave (SAW) device is modeled and wave propagation due to piezo-electric actuation from interdigital transducers (IDTs) is studied.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Suresh, S. and Mortensen, A.: Fundamentals of Functionally Graded Materials. IOM Communications Ltd, London, 1998
Markworth, A.J., Ramesh, K.S., Parks Jr., W.P.: Modelling Studies applied to functionally graded materials. J. Material Science 30 (1995) 2183–2193
El-Abbasi, N. and Meguid, S.A.: Finite Element modeling of the thermoelastic behavior of functionally graded plates and shells. Int. J. Computational Engineering Science 1(1) (2000) 151–165
Gong, S.W., Lam, K.Y., Reddy, J.N.: The elastic response of functionally graded cylindrical shells to low-velocity impact. Int. J. Impact Engineering 22 (1999) 397–417
Praveen, G.N., Reddy, J.N.: Nonlinear transient thermoelastic analysis of functionally graded ceramic-metal plates. Int. J. Solids and Structures 35(33) (1998) 4457–4476
Reddy, J.N., Chin, C.D.: Thermomechanical analysis of functionally graded cylinders and plates. J. Thermal Stresses 26(1) (1998) 593–626
Chakraborty, A., Gopalakrishnan, S., Reddy, J.N.: A new beam finite element for the analysis of functionally graded materials. Int. J. Mechanical Sciences (under review) 2003
Chakraborty, A., Gopalakrishnan, S.: A spectrally formulated finite element for wave propagation analysis in functionally graded beams. Int. J. Solids and Structures (in press) 2003
Han, X., Liu, G.R., Lam, K.Y.: Transient waves in plates of functionally graded materials. Int. J. Numerical Methods in Engineering 52 (2002) 851–865
Liu, G.R., Tani, J., Ohyoshi, T.: Lamb waves in a functionally gradient material plates and its transient response. Part 1: Theory, Part 2: Calculation results. Transactions of Japan society of mechanical engineers 57A(535) (1991) 131–142
Liu, G.R., Tani, J., Ohyoshi, T., Watanabe, K.: Transient waves in anisotropic laminated plates, part 1: Theory; Part 2: Applications. J. Vibration and Acoustics 113 (1991) 230–239
Reddy, J.N.: Analysis of functionally graded plates. Int. J. Numerical Methods in Engineering 47 (2000) 663–684
Liu, G.R., Tani, J.: Surface waves in functionally gradient piezoelectric plates. ASME J. Vibration and Acoustics 116 (1994) 440–448
Liu, G.R., Tani, J.: SH surface waves in functionally gradient piezoelectric material plates. Transactions of the Japan Society of Mechanical Engineers 58A(547) (1992) 504–507
Liu, G.R., Tani, J.: Surface waves in functionally graded piezoelectric plates. Trans. ASME 116 (1994) 440–448
Lefebvre J.E., Zhang V., Gazalet J., Gryba T. and Sadaune V.: Acoustic wave propagation in continuous functionally graded plates: An extension of the Legendre polynomial approach. IEEE Trans. on UFFC 48(5) (2001)
Chakraborty, A. and Gopalakrishnan, S.: Various numerical techniques for analysis of longitudinal wave propagation in inhomogeneous one-dimensional waveguides. Acta Mechanica (accepted) 2003
Chakraborty, A., Roy Mahapatra, D.R. and Gopalakrishnan, S.: Finite element analysis of free vibration and wave propagation in asymmetric composite beams with structural discontinuities. Composite Structures 55(1) (2001) 23–36
Chakraborty, A. and Gopalakrishnan, S.: Study of lateral contraction effects in a deep composite laminated beam through a new finite element formulation. Mechanics of Advanced Materials and Structures (in press) 2003
Makkonen, T., Holappa, A. and Salomaa, M.M.: Finite Element Simulation of Thin-film Composite BAW Resonators. IEEE Transactions on UFFC 48(5) 2001
Hasegawa, K., Inagawa, K. and Koshiba, M.: Extraction of all coefficients of coupled-mode equations for natural, single phase, unidirectional SAW transducers from dispersion characteristics computed by hybrid finite element method. IEEE Transactions on UFFC 48(5) 2001
Ventura, P., Hode, J.M., Desbois, J. and Solal, M.: Combined FEM and Green’s function analysis of periodic SAW structure, application to the calculation of reflection and scattering parameters. IEEE Transactions on UFFC 48(5) 2001
Wang, Q. and Varadan, V.K.: Wave propagation in piezoelectric coupled plate by use of interdigital transducers, Part 1. Dispersion characteristics. Int. J. Solids and Structures 39 (2002) 1119–1130
Wang, Q. and Varadan, V.K.: Wave propagation in piezoelectric coupled plate by use of interdigital transducers, Part 2. Wave excitation by interdigital transducer. Int. J. Solids and Structures 39 (2002) 1131–1144
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2003 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Chakraborty, A., Mahapatra, D.R., Gopalakrishnan, S. (2003). Finite Element Simulation of BAW Propagation in Inhomogeneous Plate Due to Piezoelectric Actuation. In: Kumar, V., Gavrilova, M.L., Tan, C.J.K., L’Ecuyer, P. (eds) Computational Science and Its Applications — ICCSA 2003. ICCSA 2003. Lecture Notes in Computer Science, vol 2668. Springer, Berlin, Heidelberg. https://doi.org/10.1007/3-540-44843-8_78
Download citation
DOI: https://doi.org/10.1007/3-540-44843-8_78
Published:
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-40161-2
Online ISBN: 978-3-540-44843-3
eBook Packages: Springer Book Archive