Abstract
The non-destructive testing based on eddy currents (EC-NDT) is an in-field inspection technique mainly used to detect and characterize defects in conductive materials. This technique is adopted in many industrial, manufacturing and aerospace applications. Today, in aeronautical and industrial applications, new thin carbon fiber materials often substitute metallic materials as aluminum, copper and so on. Therefore, the actual trend of EC-NDT is the in-field inspection of these very thin materials. Considering the skin depth of induced eddy current, the thinness of these materials imposes the use of higher frequencies than those typically adopted in traditional tests. Due to the inductive load of the excitation coil, the voltage required to obtain the desired current values could reach very high values. The use of resonant excitation circuits could mitigate this problem. The article describes the effect of some real resonant circuits on the improvement of feeding high-frequency EC-NDT probes in terms of required voltage and power.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Betta, G., Ferrigno, L., Laracca, M., Burrascano, P., Ricci, M., Silipigni, G.: An experimental comparison of multi-frequency and chirp excitations for eddy current testing on thin defects. Measurement 63, 207–220 (2015)
Hughes, R., Fana, Y., Dixon, S.: Near electrical resonance signal enhancement (NERSE) in eddy-current crack detection. In: NDT&E International, pp. 82–89 (2014)
Wheeler, H.A.: Formulas for the skin effect. Proc. IRE 30(9), 412–424 (1942)
Owston, C.N.: A high frequency eddy-current, non-destructive testing apparatus with automatic probe positioning suitable for scanning applications. J. Phys. E. Sci. Instrum. 3(10), 814 (1970)
Liu, C.Y., Dong, Y.G.: Resonant coupling of a passive inductance-capacitance- resistor loop in coil-based sensing systems. IEEE Sens. J. 12(12), 3417–23 (2012)
Bleaney, B.I., Bleaney, B.: Electricity and Magnetism. Oxford University Press, Oxford (1989)
Magnetic Field Generator Uses New Resonant Circuit. Application note. http://www.accelinstruments.com/Applications/WaveformAmp/Magnetic-Field-Generator.html
Lu, J., Huang, S., Pan, K., Qian, Z., Chen, N.: Development of characteristic test system for GMR sensor. In: Proceedings of the 8th IEEE International Symposium on Instrumentation and Control Technology (ISICT), London, pp. 20–23 (2012)
Bernieri, A., Betta, G., Ferrigno, L., Laracca, M.: Multi-frequency Eddy Current Testing using a GMR based instrument. Int. J. Appl. Electromagn. Mech., 355–362 (2012)
Ferrigno, L., Laracca, M., Liguori, C., Pietrosanto, A.: An FPGA-based instrument for the estimation of R, L, and C parameters under nonsinusoidal conditions. IEEE Trans. Instrum. Meas. 61(67), 1503–1511 (2012)
Bernieri, A., Ferrigno, L., Laracca, M., Tamburrino, A.: Improving GMR magnetometer sensor uncertainty by implementing an automatic procedure for calibration and adjustment. In: Proceedings of IEEE Instrumentation and Measurement Technology Conference (2007). https://doi.org/10.1109/imtc.2007.379174
Betta, G., Ferrigno, L., Laracca, M.: Calibration and adjustment of an eddy current based multi-sensor probe for non-destructive testing. In: Proceedings of the ISA/IEEE Sensors for Industry Conference, pp. 120–124 (2002)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Bernieri, A., Betta, G., Ferrigno, L., Laracca, M., Rasile, A. (2019). Improvement of the Frequency Behavior of an EC-NDT Inspection System. In: Andò, B., et al. Sensors. CNS 2018. Lecture Notes in Electrical Engineering, vol 539. Springer, Cham. https://doi.org/10.1007/978-3-030-04324-7_74
Download citation
DOI: https://doi.org/10.1007/978-3-030-04324-7_74
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-04323-0
Online ISBN: 978-3-030-04324-7
eBook Packages: EngineeringEngineering (R0)