Abstract
Since workpiece defect detection is a typical problem in computer vision with small datasets, generally its solutions cannot exploit the advantages of high accuracy, generalization ability, and neural network structures from the deep learning paradigm. Thus, traditional image processing techniques are still widely applied in such requirements. Aiming at three types of defects (crack, pitting and scratch) on a workpiece with non-concentric circular textures that severely interfere in the defect recognition stage, this paper proposes a sliding window filter for the texture detection. Experiments compare the proposed method with the polar coordinate mapping method and the T-smooth texture removal algorithm. Results show that the proposed method reveals the three types of defects better than the other two methods.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Stahlinstitut Stahlinstitut VDEh: Fehlerkatalog Grobblech/Catalogue of Heavy Plates Defects, Stahleisen (2015)
Neogi, N., Mohanta, D.K., Dutta, P.K.: Review of vision-based steel surface inspection systems. EURASIP J. Image Video Process. 2014(1), 50 (2014)
Liu, W., Yan, Y., Li, J., Zhang, Y., Sun, H.: Automated on-line fast detection for surface defect of steel strip based on multivariate discriminant function. In: 2008 Second International Symposium on Intelligent Information Technology Application, vol. 2, pp. 493–497. IEEE (2008)
Ding, S., Liu, Z., Li, C.: AdaBoost learning for fabric defect detection based on hog and SVM. In: 2011 International conference on multimedia technology, pp. 2903–2906. IEEE (2011)
Caleb, P., Steuer, M.: Classification of surface defects on hot rolled steel using adaptive learning methods. In: Proceedings of the KES’2000 Fourth International Conference on Knowledge-Based Intelligent Engineering Systems and Allied Technologies, (Cat. No. 00TH8516), vol. 1, pp. 103–108. IEEE (2000)
Chondronasios, A., Popov, I., Jordanov, I.: Feature selection for surface defect classification of extruded aluminum profiles. Int. J. Adv. Manuf. Technol. 83(1–4), 33–41 (2016)
Maenpaa, T.: Surface quality assessment with advanced texture analysis techniques. In: Proceedings of the International Surface Inspection Summit, Luxembourg (2006)
Song, K., Yan, Y.: A noise robust method based on completed local binary patterns for hot-rolled steel strip surface defects. Appl. Surf. Sci. 285, 858–864 (2013)
Mak, K.-L., Peng, P., Yiu, K.F.C.: Fabric defect detection using morphological filters. Image Vis. Comput. 27(10), 1585–1592 (2009)
Zheng, H., Kong, L.X., Nahavandi, S.: Automatic inspection of metallic surface defects using genetic algorithms. J. Mater. Process. Technol. 125, 427–433 (2002)
Luiz, A.O.M., Flávio, L.C.P., Paulo, E.M.A.: Automatic detection of surface defects on rolled steel using computer vision and artificial neural networks. In: IECON 2010–36th Annual Conference on IEEE Industrial Electronics Society, pp. 1081–1086. IEEE (2010)
Bulnes, F.G., Usamentiaga, R., García, D.F., Molleda, J.: Vision-based sensor for early detection of periodical defects in web materials. Sensors 12(8), 10788–10809 (2012)
Yichi, Z., Lv, W., Xuedong, L.: Defects detection of cold-roll steel surface based on MATLAB. In: 2011 Third International Conference on Measuring Technology and Mechatronics Automation, vol. 1, pp. 827–830. IEEE (2011)
Li, W., Lu, C., Zhang, J.: A local annular contrast based real-time inspection algorithm for steel bar surface defects. Appl. Surf. Sci. 258(16), 6080–6086 (2012)
Bai, X., Fang, Y., Lin, W., Wang, L., Ju, B.-F.: Saliency-based defect detection in industrial images by using phase spectrum. IEEE Trans. Ind. Inf. 10(4), 2135–2145 (2014)
Borwankar, R., Ludwig, R.: An optical surface inspection and automatic classification technique using the rotated wavelet transform. IEEE Trans. Instr. Meas. 67(3), 690–697 (2018)
Hu, G.-H.: Automated defect detection in textured surfaces using optimal elliptical gabor filters. Optik 126(14), 1331–1340 (2015)
Jeon, Y.-J., Choi, D.-C., Lee, S.J., Yun, J.P., Kim, S.W.: Defect detection for corner cracks in steel billets using a wavelet reconstruction method. JOSA A, 31(2), 227–237 (2014)
Ghorai, S., Mukherjee, A., Gangadaran, M., Dutta, P.K.: Automatic defect detection on hot-rolled flat steel products. IEEE Trans. Instrum. Measur. 62(3), 612–621 (2012)
Choi, D.C., Jeon, Y.J., Yun, J.P., Yun, S.W., Kim, S.W.: An algorithm for detecting seam cracks in steel plates. World Acad. Sci. Eng. Technol. 6, 1456–1459 (2012)
Blackledge, J., Dubovitskiy, D.: A surface inspection machine vision system that includes fractal texture analysis. J. Intell. Syst. 3(2), 76–89 (2008)
Susan, S., Sharma, M.: Automatic texture defect detection using gaussian mixture entropy modeling. Neurocomputing 239, 232–237 (2017)
Cen, Y.-G., Zhao, R.-Z., Cen, L.-H., Cui, L.-H., Miao, Z.-J., Wei, Z.: Defect inspection for TFT-LCD images based on the low-rank matrix reconstruction. Neurocomputing 149, 1206–1215 (2015)
Masci, J., Meier, U., Fricout, G., Schmidhuber, J.: Multi-scale pyramidal pooling network for generic steel defect classification. In: The 2013 International Joint Conference on Neural Networks (IJCNN), pp. 1–8. IEEE (2013)
Wang, T., Chen, Y., Qiao, M., Snoussi, H.: A fast and robust convolutional neural network-based defect detection model in product quality control. Int. J. Adv. Manuf. Technol. 94(9–12), 3465–3471 (2018)
Cha, Y.-J., Choi, W., Suh, G., Mahmoudkhani, S., Büyüköztürk, O.: Autonomous structural visual inspection using region-based deep learning for detecting multiple damage types. Comput.-Aided Civ. Infrastruct. Eng. 33(9), 731–747 (2018)
Xiao, Z., Leng, Y., Geng, L., Xi, J.: Defect detection and classification of galvanized stamping parts based on fully convolution neural network. In: Ninth International Conference on Graphic and Image Processing (ICGIP 2017), vol. 10615, pp. 106150K. International Society for Optics and Photonics (2018)
Li, X., Yan, Q., Xia, Y., Jia, J.: Structure extraction from texture via relative total variation. ACM Trans. Graph. (TOG) 31(6), 139 (2012)
Hassanein, A.S., Mohammad, S., Sameer, M., Ragab, M.E.: A survey on Hough transform, theory, techniques and applications. arXiv preprint arXiv:1502.02160 (2015)
Rahmdel, P.S., Comley, R., Shi, D., McElduff, S.: A review of Hough transform and line segment detection approaches. In: VISAPP, vol. 1, pp. 411–418 (2015)
Sur, F., Grediac, M.: Automated removal of quasiperiodic noise using frequency domain statistics. J. Electron. Imaging 24(1), 013003 (2015)
W Chen, S., Pellequer, J.-L.: DeStripe: frequency-based algorithm for removing stripe noises from AFM images. BMC struct. Biol. 11(1), 7 (2011)
Acknowledgements
This work was supported by the Shenzhen Overseas High Level Talent (Peacock Plan) Program KQTD20140630154026047, the Shenzhen Theme-Based Basic Research Program JCYJ20180504170303184, and the National Natural Science Foundation of China (under Grant No. 61703284).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Qin, S., Guo, D., Chen, H., Xi, N. (2019). Non-concentric Circular Texture Removal for Workpiece Defect Detection. In: Yu, H., Liu, J., Liu, L., Ju, Z., Liu, Y., Zhou, D. (eds) Intelligent Robotics and Applications. ICIRA 2019. Lecture Notes in Computer Science(), vol 11743. Springer, Cham. https://doi.org/10.1007/978-3-030-27538-9_49
Download citation
DOI: https://doi.org/10.1007/978-3-030-27538-9_49
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-27537-2
Online ISBN: 978-3-030-27538-9
eBook Packages: Computer ScienceComputer Science (R0)