Abstract
Despite rapid advancements in dexterity and mechanical design, the utility of humanoid robots outside of a controlled laboratory setting is limited in part due to the complexity involved in programming robots to grasp common objects. There exists a need for an efficient method to command high degree-of-freedom (DoF) position-controlled dexterous manipulators to grasp a range of objects such that explicit models are not needed for every interaction. The authors propose a method termed geometrical synergies that, similar to the neuroscience concept of postural synergies, aims to decrease the commanded DoF of the humanoid hand. In the geometrical synergy approach, the method relies on grasp design based on intuitive measurements of the object to be grasped, in contrast to postural synergy methods that focus on the principal components of human grasps to determine robot hand joint commands. For this paper, a synergy was designed to grasp cylinder-shaped objects. Using the SynGrasp toolbox, a model of a twelve-DoF hand was created to perform contact analysis around a small set of cylinders defined by a single variable, diameter. Experiments were performed with the robot to validate and update the synergy-based models. Successful manipulation of a large range of cylindrical objects not previously introduced to the robot was demonstrated. This geometric synergy-based grasp planning method can be applied to any position-controlled humanoid hand to decrease the number of commanded DoF based on simple, measurable inputs in order to grasp commonly shaped objects. This method has the potential to vastly expand the library of objects the robot can manipulate.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Badger, J., Hulse, A., Tayler, R., Curtis, A., Gooding, D., Thackston, A.: Model-based robotic dynamic motion control for the Robonaut 2 humanoid robot. In: Proceedings of the IEEE-RAS international conference on humanoid robots (Humanoids), pp. 62–67, Atlanta, GA (2013). https://doi.org/10.1109/HUMANOIDS.2013.7029956, http://ieeexplore.ieee.org.ezproxy.rice.edu/stamp/stamp.jsp?tp=&arnumber=7029956&isnumber=7029946
Bicchi, A.: On the closure properties of robotic grasping. 14(4), 319–334
Bridgwater, L.B., Ihrke, C.A., Diftler, M.A., Abdallah, M.E., Radford, N.A., Rogers, J.M., Yayathi, S., Askew, R.S., Linn, D.M.: The Robonaut 2 hand - designed to do work with tools. In: 2012 IEEE International Conference on Robotics and Automation, pp. 3425–3430. IEEE, Minnesota (2012)
Catalano, M.G., Grioli, G., Serio, A., Farnioli, E., Piazza, C., Bicchi, A.: Adaptive synergies for a humanoid robot hand. In: 2012 12th IEEE-RAS International Conference on Humanoid Robots (Humanoids), pp. 7–14. IEEE, Osaka (2012)
Ciocarlie, M., Goldfeder, C., Allen, P.: Dexterous grasping via eigengrasps: a low-dimensional approach to a high-complexity problem. In: Robotics: Science and Systems Manipulation Workshop-Sensing and Adapting to the Real World, Citeseer (2007)
Ciocarlie, M., Goldfeder, C., Allen, P.: Dimensionality reduction for hand-independent dexterous robotic grasping. In: 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 3270–3275. IEEE, San Diego (2007)
Ciocarlie, M.T., Allen, P.K.: Hand posture subspaces for dexterous robotic grasping. Int. J. Robot. Res. 28(7), 851–867 (2009)
Cutkosky, M.R.: On grasp choice, grasp models, and the design of hands for manufacturing tasks. IEEE Trans. Robot. Autom. 5(3), 269–279 (1989)
Diftler, M.A., Mehling, J.S., Abdallah, M.E., Radford, N.A., Bridgwater, L.B., Sanders, A.M., Askew, R.S., Linn, D.M., Yamokoski, J.D., Permenter, F.A., Hargrave, B.K., Platt, R., Savely, R.T., Ambrose, R.O.: Robonaut 2 - the first humanoid robot in space. In: 2011 IEEE International Conference on Robotics and Automation, pp. 2178–2183 (2011)
GarcĂa, N., Suárez, R., Rosell, J.: Task-dependent synergies for motion planning of an anthropomorphic dual-arm system. IEEE Trans. Robot. 33(3), 756–764 (2017). June
Grebenstein, M., Chalon, M., Hirzinger, G., Siegwart, R.: Antagonistically driven finger design for the anthropomorphic DLR hand arm system. In: 2010 10th IEEE-RAS International Conference on Humanoid Robots, pp. 609–616. IEEE, Nashville (2010)
Hart, S., Dinh, P., Hambuchen, K.: The affordance template ROS package for robot task programming. In: 2015 IEEE International Conference on Robotics and Automation (ICRA), pp. 6227–6234 (2015)
Johnson, M., Shrewsbury, B., Bertrand, S., Wu, T., Duran, D., Floyd, M., Abeles, P., Stephen, D., Mertins, N., Lesman, A., Carff, J., Rifenburgh, W., Kaveti, P., Straatman, W., Smith, J., Griffioen, M., Layton, B., de Boer, T., Koolen, T., Neuhaus, P., Pratt, J.: Team IHMC’s lessons learned from the DARPA robotics challenge trials. J. Field Robot. 32(2), 192–208 (2015)
Jörntell, H.: Synergy control in subcortical circuitry: insights from neurophysiology. In: Human and Robot Hands, pp. 61–68. Springer, Cham (2016)
Kaneko, K., Harada, K., Kanehiro, F., Miyamori, G., Akachi, K.: Humanoid robot HRP-3. In: 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems, pp. 2471–2478. IEEE, Nice (2008)
Malvezzi, M., Gioioso, G., Salvietti, G., Prattichizzo, D., Bicchi, A.: Syngrasp: a MATLAB toolbox for grasp analysis of human and robotic hands. In: 2013 IEEE International Conference on Robotics and Automation, pp. 1088–1093 (2013)
Nagatani, K., Kiribayashi, S., Okada, Y., Otake, K., Yoshida, K., Tadokoro, S., Nishimura, T., Yoshida, T., Koyanagi, E., Fukushima, M., Kawatsuma, S.: Emergency response to the nuclear accident at the Fukushima Daiichi nuclear power plants using mobile rescue robots. J. Field Robot. 30(1), 44–63 (2013)
Roa, M.A., Argus, M.J., Leidner, D., Borst, C., Hirzinger, G.: Power grasp planning for anthropomorphic robot hands. In: 2012 IEEE International Conference on Robotics and Automation, pp. 563–569
Salvietti, G., Gioioso, G., Malvezzi, M., Prattichizzo, D.: How to map human hand synergies onto robotic hands using the syngrasp matlab toolbox. In: Human and Robot Hands, pp. 195–209. Springer, Cham (2016)
Santello, M., Flanders, M., Soechting, J.F.: Postural hand synergies for tool use. J. Neurosci. 18(23), 10105–10115 (1998)
Santina, C.D., Grioli, G., Catalano, M., Brando, A., Bicchi, A.: Dexterity augmentation on a synergistic hand: the Pisa/IIT SoftHand+. In: 2015 IEEE-RAS 15th International Conference on Humanoid Robots (Humanoids), pp. 497–503 (2015)
Yanco, H.A., Norton, A., Ober, W., Shane, D., Skinner, A., Vice, J.: Analysis of human-robot interaction at the DARPA robotics challenge trials. J. Field Robot. 32(3), 420–444 (2015)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Farrell, L.C., Dennis, T.A., Badger, J., O’Malley, M.K. (2020). Simply Grasping Simple Shapes: Commanding a Humanoid Hand with a Shape-Based Synergy. In: Amato, N., Hager, G., Thomas, S., Torres-Torriti, M. (eds) Robotics Research. Springer Proceedings in Advanced Robotics, vol 10. Springer, Cham. https://doi.org/10.1007/978-3-030-28619-4_40
Download citation
DOI: https://doi.org/10.1007/978-3-030-28619-4_40
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-28618-7
Online ISBN: 978-3-030-28619-4
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)