Abstract
In the paper, the problem of multivariant production management is considered. Individual approach of manufacturing companies to their customers is a very desirable feature, but it is also linked with additional challenges in the field of organisation and management. This paper presents a solution implemented in a company, consisting in calculation of labour input based on simulation of production processes. As a tool for increasing the control of multivariant production, the “labour intensity calculator” is suggested. On the grounds of measurement data from representative processes and the production documentation, using simulations of similar processes, the program estimates manufacturing data for the products with preset configurations of parameters. The suggested solution can make an aid for analysis and control of execution stages of variable projects (production parameters, processes effectiveness), with no necessity to take separate measurements for each considered case, as well as for identification and solution of the appearing problems.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zipkin, P.: The limits of mass customization. MIT Sloan Manag. Rev. 42(3), 81–87 (2001)
Kłos, S., Patalas-Maliszewskal, J.: The topological impact of discrete manufacturing systems on the effectiveness of production processes. In: Rocha, Á., Correia, A., Adeli, H., Reis, L., Costanzo, S. (eds.) WorldCIST 2017. AISC, vol. 571, pp. 441–452. Springer, Cham (2017)
Kluz, R., Antosz, K.: Simulation of flexible manufacturing systems as an element of education towards industry 40. In: Trojanowska, J., Ciszak, O., Machado, J., Pavlenko, I. (eds.) Advances in Manufacturing II. LNME, pp. 332–341. Springer, Cham (2019)
Czarnecka, A., Górski, A.: How can the fractal geometry help with analyze of the stock exchange market? In: Wilimowska, Z., Borzemski, L., Grzech, A., Świątek, J. (eds.) ISAT 2016. AISC, vol. 524, pp. 45–53. Springer, Cham (2017)
Sobaszek, Ł., Gola, A., Kozłowski, E.: Application of survival function in robust scheduling of production jobs. In: Ganzha, M., Maciaszek, M., Paprzycki, M. (eds) Proceedings of the 2017 Federated Conference on Computer Science and Information Systems 11, pp. 575–578 (2017)
Rosienkiewicz, M., Gąbka, J., Helman, J., Kowalski, A., Susz, S.: Additive Manufacturing Technologies Cost Calculation as a Crucial Factor in Industry 40. In: Hamrol, A., Ciszak, O., Legutko, S., Jurczyk, M. (eds.) Advances in Manufacturing. LNME, pp. 171–183. Springer, Cham (2018)
Kempa, W.M., Paprocka, I., Kalinowski, K., Grabowik, C., Krenczyk, D.: Study on transient queueing delay in a single-channel queueing model with setup and closedown times. In: Dregvaite, G., Damasevicius, R. (eds.) ICIST 2016. CCIS, vol. 639, pp. 464–475. Springer, Cham (2016)
Grzybowska, K., Kovács, G.: The modelling and design process of coordination mechanisms in the supply chain. J. Appl. Logic 24, 25–38 (2017)
Górnicka, D., Burduk, A.: Improvement of production processes with the use of simulation models. In: Wilimowska, Z., Borzemski, L., Świątek, J. (eds.) ISAT 2017. AISC, vol. 657, pp. 265–274. Springer, Cham (2018)
Kotowska, J., Burduk, A.: Optimization of production support processes with the use of simulation tools. In: Wilimowska, Z., Borzemski, L., Świątek, J. (eds.) ISAT 2017. AISC, vol. 657, pp. 275–284. Springer, Cham (2018)
Kochańska, J., Burduk, A.: Rationalization of retooling process with use of SMED and simulation tools. In: Wilimowska, Z., Borzemski, L., Świątek, J. (eds.) ISAT 2018. AISC, vol. 854, pp. 303–312. Springer, Cham (2019)
Antonelli, D., Stadnicka, D.: Combining factory simulation with value stream mapping: a critical discussion. Procedia CIRP 67, 30–35 (2018)
Jarecki, W.: A concept of human capital. In: Kopycińska, D. (ed.) Human Capital in Economy. PTE, Szczecin (2003). (in Polish)
Stabryła, A.: Analysis and Design of Company Management Systems. Mfiles.pl, Kraków (2009). (in Polish)
Kutschenreiter-Praszkiewicz, I.: Selected problems of production planning. Ph.D. thesis. Lodz University of Technology (2000) (in Polish)
Saha, S.: Increasing organizational commitment strategically using Hard and Soft HRM. Int. J. Global Bus. Manag. Res. 2(1), 62–63 (2013)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Kochańska, J., Górnicka, D., Burduk, A. (2020). Calculation of Labour Input in Multivariant Production with Use of Simulation. In: Świątek, J., Borzemski, L., Wilimowska, Z. (eds) Information Systems Architecture and Technology: Proceedings of 40th Anniversary International Conference on Information Systems Architecture and Technology – ISAT 2019. ISAT 2019. Advances in Intelligent Systems and Computing, vol 1051. Springer, Cham. https://doi.org/10.1007/978-3-030-30604-5_3
Download citation
DOI: https://doi.org/10.1007/978-3-030-30604-5_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-30603-8
Online ISBN: 978-3-030-30604-5
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)