Abstract
The paper proposes a scheme for secondary virtual circuit test based on the characteristics of intelligent substation, and the test scheme is divided into two types including dynamic test and static test, the static test is based on the Substation Configuration Description (SCD) file configured for the whole intelligent substation, firstly virtual terminal connections are exported from SCD by the order of separations, the information associated with each separation is generated as a table type file, checking whether SCD file is consistent with the secondary design drawings. The dynamic test is based on the configure information in SCD as well, then communication condition, message analysis and receiving and dispatching simulation are tested for the network communication, verifying whether the device’s communication actions are satisfied to IEC 61850 and the requirement of engineering design. The scheme fully considers the characteristics of intelligent substation network and the communication details that IEC 61850 sets, and strictly checks the important information in the virtual circuit, making sure that virtual circuit is satisfied to the requirement of design. The test scheme provides not only help for the debug and acceptance of the project but also convenient for quick problems searching in operation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Zhang, K., Chen, L.: A smart substation field secondary device testing technique based on recurrence principle. J. Power Energy Eng. 2(4), 244–251 (2014). (in Chinese)
Pan, Y.: Research on IED configurator based on IEC 61850. In: International Conference on Automation and Systems Engineering 04, pp. 1–4 (2011)
Zhu, L., Shi, D., Wang, P.: IEC 61850-based information model and configuration description of communication network in substation automation. IEEE Trans. Power Delivery 29(01), 12–17 (2014)
Ke, J.: Intelligent substation relay protection debugging and application. China New Technol. New Prod. 24, 13–14 (2017). (in Chinese)
Yu, L., Wu, H., Huang, J.: Development and application on virtual secondary circuit automatic testing Yu system of smart substation. Inner Mongolia Electric. Power 33(05), 53–57 (2015). (in Chinese)
Liu, B., Lin, J.: Development and application of intelligent software for virtual circuit test in digital substation. Guangxi Electric. Power 34(02), 5–7 (2011). (in Chinese)
Tao, Y., Zhang, M.: Real-time analysis of intelligent substation communication network based on IEC 61850. Electr. Autom. 40(03), 37–39 (2018). (in Chinese)
Hou, L., Li, H., Zhou, J.: Intelligent substation operation and maintenance management problems and solutions. Shandong Ind. Technol. 20, 170 (2018). (in Chinese)
Yoon, J., Lin, M., Kim, B.: MBD-based electric vehicle core part modeling and dynamic property analysis. Int. J. Eng. Technol. Automob. Secur. 1(2), 1–6 (2017)
Lee, S.: Real-time hand tracking using the RGB-D camera. Int. J. Comput. Graph. 8(2), 13–20 (2017)
Wei, W., Suo, L., Peng, X.: Research on transformer fault diagnosis and multi variable parameter decision model. Asia-Pacific J. Adv. Res. Electr. Electron. Eng. 1(1), 47–54 (2017)
Kim, Y.: The hardware accelerated physics engine with operating parameters controlling the numerical error tolerance. Int. J. Adv. Sci. Technol. 119, 145–152 (2018)
Alnefaie, A., Fiaidhi, J., Mohammed, S.: Ontology-based food recommendation system for seniors: a peer to peer networking approach. Int. J. Adv. Sci. Technol. 123, 41–46 (2019)
Hui, L., Rui-li, W.: Experiments and numerical simulation of flow field inner the chain plate fiber dryer. Int. J. Control Autom. 8(3), 115–126 (2015)
Suresh, M., Edward, J.B.: Optimal placement of DG units for loss reduction in distribution systems using one rank cuckoo search algorithm. Int. J. Grid Distrib. Comput. 11(1), 37–44 (2018)
Fardad, N., Soleymani, S., Faghihi, F.: Cyber defense budget assessment in smart grid based on reliability evaluation considering practical data of HV substation. Int. J. Secur. Appl. 12(1), 1–20 (2018)
Mushtaq, S., Mir, A.: Image copy move forgery detection: a review. Int. J. Future Gener. Commun. Networking 11(2), 11–22 (2018)
Dong, X., Han, X., Wang, J., Niu, Q., Shi, W.: Pulse design method for 60 GHz impulse wireless communication system. Int. J. Signal Process. Image Process. Pattern Recogn. 10(1), 59–70 (2017). (in Chinese)
Ali, R., Peng, Y., Gupta, S.: Fusion of total variation filter and weighted bilateral filter in image denoising. Int. J. Serv. Sci. Technol. 11(1), 17–32 (2018)
Petrone, A., Franz, M.: Probe vehicle based trajectory data visualization and applications. Int. J. Transp. 6(1), 59–74 (2018)
Kaur, S., Singh, S.: Modified circular layer caching in wireless sensor networks. Int. J. Sens. Appl. Control Syst. 3(1), 7–14 (2015)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Cai, Y., Yu, T., Qian, H., Lu, Y., Lu, S. (2020). Secondary Virtual Circuit Test Scheme Based on Intelligent Substation SCD File. In: Hassanien, A., Shaalan, K., Tolba, M. (eds) Proceedings of the International Conference on Advanced Intelligent Systems and Informatics 2019. AISI 2019. Advances in Intelligent Systems and Computing, vol 1058. Springer, Cham. https://doi.org/10.1007/978-3-030-31129-2_18
Download citation
DOI: https://doi.org/10.1007/978-3-030-31129-2_18
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-31128-5
Online ISBN: 978-3-030-31129-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)