Abstract
We demonstrate how a combination of a wrist-worn and stationary barometer can be used to track the vertical position of the user’s Hand with an accuracy in the range of 30 cm. To this end, the two barometers synchronized each time an RFID reader detects them being in proximity of each other. The accuracy is sufficient to detect a specific shelve of a cupboard on which something has been placed or determine if the user’s hand is touching his/her head or the torso. The advantage of the method over IMU based approaches is that it requires only a wrist-worn sensor (as could be implemented in a smartwatch) and a reference either in an often access location in the environment or a pocket (e.g.in the smartphone) and it does not depend on a stable magnetic environment. The proposed system was tested in two different activities: Shelve recognition in a warehouse picking scenario and movement of the arm to specific body locations. Despite the simplicity of our method, it shows initial results between 55–62% and 73–91% accuracy, respectively.
The research reported in this paper has been partially supported by the BMBF (German Federal Ministry of Education and Research) in the project HeadSense(project number 01IW18001). The support is gratefully acknowledged.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Koepp, R., Allen, T., Fassett, J., Teng, A.: Achieving high speed RFID die pick and place operation. In: 2008 33rd IEEE/CPMT International Electronics Manufacturing Technology Conference (IEMT), pp. 1–8 (2008)
Cho, W., Shin, M., Jang, J., Paik, J.: Robust pedestrian height estimation using principal component analysis and its application to automatic camera calibration. In: 2018 International Conference on Electronics, Information, and Communication, pp. 1–2 (2018)
Cola, G., Avvenuti, M., Piazza, P., Vecchio, A.: Fall Detection using a head-worn barometer. In: Perego, P., Andreoni, G., Rizzo, G. (eds.) MobiHealth 2016. LNICST, vol. 192, pp. 217–224. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-58877-3_29
Ehrlich, C.R., Blankenbach, J.: Pedestrian localisation inside buildings based on multi-sensor smartphones. In: 2018 Ubiquitous Positioning, Indoor Navigation and Location-Based Services (UPINLBS), pp. 1–10 (2018)
Fishkin, K.P., Philipose, M., Rea, A.: Hands-on RFID: wireless wearables for detecting use of objects. In: Ninth IEEE International Symposium on Wearable Computers (ISWC 2005), pp. 38–41 (2005)
Hou, X., Arslan, T.: Monte carlo localization algorithm for indoor positioning using bluetooth low energy devices. In: 2017 International Conference on Localization and GNSS (ICL-GNSS), pp. 1–6 (2017)
Lee, D., Park, K.W., Park, C., Kang, I.: An efficient heave estimation using time-differenced gps carrier phase measurements and compensated barometer measurement applying error model. In: 2015 International Association of Institutes of Navigation World Congress, pp. 1–6 (2015)
Ogris, G., Stiefmeier, T., Junker, H., Lukowicz, P., Troster, G.: Using ultrasonic hand tracking to augment motion analysis based recognition of manipulative gestures. In: Ninth IEEE International Symposium on Wearable Computers, pp. 152–159 (2005)
Parviainen, J., Kantola, J., Collin, J.: Differential barometry in personal navigation. In: 2008 IEEE/ION Position, Location and Navigation Symposium, pp. 148–152 (2008)
Riyadi, M.A., Sudira, N., Hanif, M.H., Triwiyatno, A.: Design of pick and place robot with identification and classification object based on RFID using stm32vldiscovery. In: 2017 International Conference on Electrical Engineering and Computer Science (ICECOS), pp. 171–176 (2017)
Rodríguez-Martín, D., Samà, A., Pérez-López, C., Català, A.: Posture transitions identification based on a triaxial accelerometer and a barometer sensor. In: Rojas, I., Joya, G., Catala, A. (eds.) IWANN 2017. LNCS, vol. 10306, pp. 333–343. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-59147-6_29
Wei, S., Dan, G., Chen, H.: Altitude data fusion utilising differential measurement and complementary filter. IET Sci. Measur. Technol. 10(8), 874–879 (2016)
Woelfle, M., Guenthner, W.A.: Wearable RFID in order picking systems. In: RFID SysTech 2011 7th European Workshop on Smart Objects: Systems, Technologies and Applications, pp. 1–6 (2011)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering
About this paper
Cite this paper
Bello, H., Rodriguez, J., Lukowicz, P. (2019). Vertical Hand Position Estimation with Wearable Differential Barometery Supported by RFID Synchronization. In: Mucchi, L., Hämäläinen, M., Jayousi, S., Morosi, S. (eds) Body Area Networks: Smart IoT and Big Data for Intelligent Health Management. BODYNETS 2019. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 297. Springer, Cham. https://doi.org/10.1007/978-3-030-34833-5_3
Download citation
DOI: https://doi.org/10.1007/978-3-030-34833-5_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-34832-8
Online ISBN: 978-3-030-34833-5
eBook Packages: Computer ScienceComputer Science (R0)