Abstract
In view of the high degree of personalization of embedded 3D printing products, traditional 3D printing is not applicable. This paper presents an embedded three-dimensional printing technology based on high elastic strain wireless sensor. The whole method framework includes mechanical system, control module and visual module. Firstly, three non-collinear points on the high elastic strain wireless sensor are used to align the guide plate and the model. Then, according to the position and direction of the guide hole on the high elastic strain wireless sensor, the mechanical system is controlled to guide the model guide hole to move to the center of the visual module. The characteristic parameters such as roundness, length-width ratio, diameter and center distance of the guide hole are analyzed to determine whether the guide hole is qualified. The experimental results show that compared with the traditional three-dimensional printer, the three-dimensional printer designed in this paper shortens the production cycle and improves the print resolution.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Muth, J.T., Vogt, D.M., Truby, R.L.: Embedded 3D printing of strain sensors within highly stretchable elastomers. Adv. Mater. 26(36), 6307–6312 (2014)
Li, F., Smejkal, P., Macdonald, N.P., Guijt, R.M., Breadmore, M.C.: One-step fabrication of a microfluidic device with an integrated membrane and embedded reagents by multimaterial 3D printing. Anal. Chem. 89(8), 4701–4707 (2017)
Sun, K., Wei, T.S., Ahn, B.Y., Seo, J.Y., Dillon, S.J., Lewis, J.A.: 3D printing of interdigitated Li-ion microbattery architectures. Adv. Mater. 25(33), 4539–4543 (2013)
Ladd, C., So, J.H., Muth, J., Dickey, M.D.: 3D printing of free standing liquid metal microstructures. Adv. Mater. 25(36), 5081–5085 (2013)
Gebler, M., Schoot Uiterkamp, A.J.M., Visser, C.: A global sustainability perspective on 3D printing technologies. Energy Policy 74, 158–167 (2014)
Fantino, E., Chiappone, A., Roppolo, I., Manfredi, D., Bongiovanni, R., Pirri, C.F., et al.: 3D printing: 3D printing of conductive complex structures with in situ generation of silver nanoparticles. Adv. Mater. 28(19), 3711–3712 (2016)
Abbadessa, A., Blokzijl, M.M., Mouser, V.H.M., Marica, P., Malda, J., Hennink, W.E., et al.: A thermo-responsive and photo-polymerizable chondroitin sulfate-based hydrogel for 3D printing applications. Carbohydr. Polym. 149, 163–174 (2016)
Spackman, C.C., Frank, C.R., Picha, K.C., Samuel, J.: 3D printing of fiber-reinforced soft composites: process study and material characterization. J. Manuf. Process. 23, 296–305 (2016)
Parekh, D.P., Ladd, C., Panich, L., Moussa, K., Dickey, M.D.: 3D printing of liquid metals as fugitive inks for fabrication of 3D microfluidic channels. Lab Chip 16(10), 1812–1820 (2016)
Castro, N.J., Patel, R., Zhang, L.G.: Design of a novel 3D printed bioactive nanocomposite scaffold for improved osteochondral regeneration. Cell. Mol. Bioeng. 8(3), 416–432 (2015)
Javan, R., Zeman, M.N.: A prototype educational model for hepatobiliary interventions: unveiling the role of graphic designers in medical 3D printing. J. Digit. Imaging 31(9), 1–11 (2017)
Pragnya, K., Keerti, K.: 3D printing high density ceramics using binder jetting with nanoparticle densifiers. Mater. Des. 155, 443–450 (2018)
Gross, B., Lockwood, S.Y., Spence, D.M.: Recent advances in analytical chemistry by 3D printing. Anal. Chem. 89(1), 57–70 (2017)
Zhang, B., Pei, X., Zhou, C., Fan, Y., Jiang, Q., Ronca, A., et al.: The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction. Mater. Des. 152, 30–39 (2018)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering
About this paper
Cite this paper
Wang, H., Wu, Y., Ren, X., Cao, Z. (2020). Embedded 3D Printing Based on High Elastomeric Strain Wireless Sensor. In: Zhang, YD., Wang, SH., Liu, S. (eds) Multimedia Technology and Enhanced Learning. ICMTEL 2020. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 327. Springer, Cham. https://doi.org/10.1007/978-3-030-51103-6_38
Download citation
DOI: https://doi.org/10.1007/978-3-030-51103-6_38
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-51102-9
Online ISBN: 978-3-030-51103-6
eBook Packages: Computer ScienceComputer Science (R0)