Abstract
Applying the computed software ANSYS, a 3D mathematical model of magnetic field inside the mold with FC-Mold was bewrited, in order to achieve the magnetic induction results inside the mold with the FC-Mold. The distribution features of magnetic induction results of liquid steel inside the mold with the FC-Mold was resolved and discussed. The explanation of simulation results was that the FC-Mold equipment can form a stabilizing magnetic field, the magnetic field inside the liquid steel had adequate intensity, this valid magnetic field engendered by the FC-Mold was imploded in the overlay region of magnetic pole mainly. The valid magnetic field enshrouded the region of total mold width. In the external part of the overlay region of magnetic pole, the magnetic induction intensity was slightly smaller. The magnetic intensity distribution was basically even toward the width and thickness directions of mold. Toward the direction of mold height, the magnetic intensity was appeared parabolic shape in the overlay region of magnetic pole, the two peaks of magnetic intensity appeared in the center of the overlay region of magnetic pole, and then it gradually declined from the mold top toward the mold bottom outside the overlay region of magnetic pole.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Cukierski, K., Thomas, B.G.: Flow control with local electromagnetic braking in continuous casting of steel slabs. Metall. Mater. Trans. B 39(1), 94–107 (2008)
Harada, H., Takeuchi, E., Zeze, M., Ishii, T.: New sequential casting of different grade of steel with a level DC magnetic field. Tetsu-to-Hagane 86(4), 278–284 (2000)
Idogawa, A., Sugizawa, M., Takeuchi, S., Sorimachi, K., Fujii, T.: Control of molten steel flow in continuous casting mold by two static magnetic fields imposed on whole width. Mater. Sci. Eng. A 173(1–2), 293–297 (1993)
Timmel, K., Eckert, S., Gerbeth, G.: Experimental investigation of the flow in a continuous-casting mold under the influence of a transverse, direct current magnetic field. Metall. Mater. Trans. B 42(1), 68–80 (2011)
Chaudhary, R., Thomas, B.G., Vanka, S.P.: Effect of electromagnetic ruler braking (EMBr) on transient turbulent flow in continuous slab casting using large eddy simulations. Metall. Mater. Trans. B 43(3), 532–553 (2012)
Singh, R., Thomas, B.G., Vanka, S.P.: Effects of a magnetic field on turbulent flow in the mold region of a steel caster. Metall. Mater. Trans. B 44(5), 1201–1221 (2013)
Ji, C.B., Li, J.S., Tang, H.Y., Yang, S.F.: Effect of EMBr on flow in slab continuous casting mold and evaluation using nail dipping measurement. Steel Res. Int. 84(3), 259–268 (2013)
Chen, Z.H., Wang, E.G., Zhang, X.W., He, J.C.: Study on the effect of electromagnetic brake control on liquid flow in continuous casting slab mold. Res. Iron Steel 33(5), 11–14 (2005). (in Chinese)
Yamamura, H., Toh, T., Harada, H., Takeuchi, E., Ishii, T.: Effect of magnetic field conditions on the electromagnetic braking efficiency. ISIJ Int. 41(10), 1236–1244 (2001)
Li, F., Wang, E.G., Feng, M.J., Li, Z.: Simulation research of flow field in continuous casting mold with vertical electromagnetic brake. ISIJ Int. 55(4), 814–820 (2015)
Acknowledgments
This research was supported by Doctoral Research Funding Project of Jilin Engineering Normal University (Grant No. BSKJ201810) and Program for Innovative Research Team of Jilin Engineering Normal University.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Li, F., Chen, Y., Liu, W. (2021). Computational Simulation of Magnetic Field of FC-Mold. In: MacIntyre, J., Zhao, J., Ma, X. (eds) The 2020 International Conference on Machine Learning and Big Data Analytics for IoT Security and Privacy. SPIOT 2020. Advances in Intelligent Systems and Computing, vol 1282. Springer, Cham. https://doi.org/10.1007/978-3-030-62743-0_75
Download citation
DOI: https://doi.org/10.1007/978-3-030-62743-0_75
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-62742-3
Online ISBN: 978-3-030-62743-0
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)