Abstract
Recently, the wireless technology has played a very important role in the industrial world. WirelessHART and ISA100.11a are the two most standards used in the industry so far. On the other hand, the wired networks are dominating the industrial sectors due to their significant transmission reliability and high security. However, the wired networks require higher maintenance cost and do not support network reconfiguration. In this paper, we will study the performance of a composition control over wired and wireless network. The proposed industrial composition control system in this paper is represented by a three-tank system whose outlet stream concentration is controlled using a concentrated stream of control reagent comprising water and solute. The objective is to design a PID controller using Closed-loop Ziegler Nichols tuning method for the composition control system and further improve the performance of the system by fine-turning the PID parameters. The same parameters of PID controller, that are used to control the system through wired network, are taken and implemented on wireless network using MATLAB Simulink with the aid of TrueTime toolbox. The behavior of both systems is then compared and analyzed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Chung, T.D., Ibrahim, R., Asirvadam, V.S., Saad, N., Hassan, S.M.: WirelessHARTTM: Filter Design for Industrial Wireless Networked Control Systems. CRC Press, Boca Raton (2017)
Huang, G., Akopian, D., Chen, C.P.: Measurement and characterization of channel delays for broadband power line communications. IEEE Trans. Instrum. Meas. 63(11), 2583–2590 (2014)
Devan, P.A.M., Hussin, F.A.B., Ibrahim, R., Bingi, K., Abdulrab, H.Q.A.: Fractional-order predictive pi controller for dead-time processes with set-point and noise filtering. IEEE Access 8, 183759–183773 (2020)
Shi, Y., Wang, J., Fang, X., Huang, Y., Gu, S.: Robust mixed H2/H∞ control for an uncertain wireless sensor network systems with time delay and packet loss. Int. J. Control Autom. Syst. 8, 1–13 (2020)
Kim, A.N., Hekland, F., Petersen, S., Doyle, P.: When HART goes wireless: understanding and implementing the WirelessHART standard. In: 2008 IEEE International Conference on Emerging Technologies and Factory Automation, pp. 899–907. IEEE (2008)
Commission, I.: Industrial Communication Networks-Wireless Communication Network and Communication Profiles-WirelessHARTâ„¢, Switzerland: IEC, p. 944 (2010)
Muller, I., Netto, J.C., Pereira, C.E.: WirelessHART field devices. IEEE Instrum. Meas. Mag. 14(6), 20–25 (2011)
Shell, C., Henderson, J., Verra, H., Dyer, J.: Implementation of a wireless battery management system (WBMS). In: 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, pp. 1954–1959. IEEE (2015)
Alliance, Z.: ZigBee, vol. 5, p. 2017 (2017). Accessed May 2017
ISA100 Standards Committee. ISA100. 11a, Wireless Systems for Industrial Automation: Process Control and Related Applications. Technical Report, Research Triangle Park, North Carolina (2009)
Chung, T.D., Ibrahim, R.B., Asirvadam, V.S., Saad, N.B., Hassan, S.M.: Adopting EWMA filter on a fast sampling wired link contention in wirelesshart control system. IEEE Trans. Instrum. Meas. 65(4), 836–845 (2016)
Hassan, S.M., Ibrahim, R., Bingi, K., Chung, T.D., Saad, N.: Application of wireless technology for control: a WirelessHART perspective. Procedia Comput. Sci. 105(supplement C), 240–247 (2017)
Nawaz, F., Jeoti, V.: Performance assessment of WirelessHART technology for its implementation in dense reader environment. Computing 98(3), 257–277 (2016)
Huang, Q., Sikora, A., Groza, V.F., Zand, P.: Simulation & analysis of WirelessHART nodes for real-time actuator application. In: 2014 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, pp. 1509–1594. IEEE (2014)
Remley, C.A., Koepke, G.H., Grosvenor, C.A., Ladbury, J.M., Camell, D.G., Coder, J.B., Johnk, R.: NIST tests of the wireless environment in automobile manufacturing facilities, pp. 1–122 (2008)
Tanghe, E., Joseph, W., Verloock, L., Martens, L., Capoen, H., Van Herwegen, K., Vantomme, W.: The industrial indoor channel: large-scale and temporal fading at 900, 2400, and 5200 MHz. IEEE Trans. Wirel. Commun. 7(7), 2740–2751 (2008)
Saifullah, A., Xu, Y., Lu, C., Chen, Y.: End-to-end communication delay analysis in industrial wireless networks. IEEE Trans. Comput. 64(5), 1361–1374 (2014)
Bello, L.L., Toscano, E.: Coexistence issues of multiple co-located IEEE 802.15.4/ZigBee networks running on adjacent radio channels in industrial environments. IEEE Trans. Ind. Inf. 5(2), 157–167 (2009)
Liu, Y., Candell, R., Moayeri, N.: Effects of wireless packet loss in industrial process control systems. ISA Trans. 68, 412–424 (2017)
LeBlanc, S.E., Coughanowr, D.R.: Process Systems Analysis and Control. McGraw-Hill Higher Education, Boston (2009)
Cervin, A., Henriksson, D., Ohlin, M.: TrueTime 2.0–reference manual. Department of Automatic Control, Lund University (2016)
Acknowledgement
The author would like to acknowledge the support from the Universiti Teknologi PETRONAS, Yayasan UTP Fundamental Research Grant Scheme (YUTP) cost centre 015LC0–045.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Abdulrab, H.Q.A., Hussin, F.A., Arun, P.S., Awang, A., Ismail, I. (2021). Simulation and Control of Industrial Composition Process Over Wired and Wireless Networks. In: Saeed, F., Mohammed, F., Al-Nahari, A. (eds) Innovative Systems for Intelligent Health Informatics. IRICT 2020. Lecture Notes on Data Engineering and Communications Technologies, vol 72. Springer, Cham. https://doi.org/10.1007/978-3-030-70713-2_62
Download citation
DOI: https://doi.org/10.1007/978-3-030-70713-2_62
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-70712-5
Online ISBN: 978-3-030-70713-2
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)