Abstract
Predictive planning of maintenance windows reduces the risk of unwanted production or operational downtimes and helps to keep machines, vessels, or any system in optimal condition. The quality of such a data-driven model for the prediction of remaining useful lifetime is largely determined by the data used to train it. Training data with qualitative information, such as labeled data, is extremely rare, so classical similarity models cannot be applied. Instead, degradation models extrapolate future conditions from historical behaviour by regression. Research offers numerous methods for predicting the remaining useful lifetime by degradation regression. However, the implementation of existing approaches poses significant challenges to users due to a lack of comparability and best practices. This paper provides a general approach for composing existing process steps such as health stage classification, frequency analysis, feature extraction, or regression models for the estimation of degradation. To challenge effectiveness and relations between the steps, we run several experiments in two comprehensive case studies, one from manufacturing and one from dry-bulk shipping. We conclude with recommendations for composing a data-driven degradation estimation process.
N. Finke and M. Mohr—contributed equally to this work.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Adland, R., Cariou, P., Jia, H., Wolff, F.C.: The energy efficiency effects of periodic ship hull cleaning. J. Clean. Prod. 178, 1–13 (2018)
Ahmad, W., Khan, S.A., Islam, M.M.M., Kim, J.M.: A reliable technique for remaining useful life estimation of rolling element bearings using dynamic regression models. Reliab. Eng. Syst. Saf. 184, 67–76 (2019)
Bandt, C., Pompe, B.: Permutation entropy: a natural complexity measure for time series. Phys. Rev. Lett. 88(17), 174102 (2002)
Benkedjouh, T., Medjaher, K., Zerhouni, N., Rechak, S.: Remaining useful life estimation based on nonlinear feature reduction and support vector regression. Eng. Appl. Artif. Intell. 26(7), 1751–1760 (2013)
Boskoski, P., Gasperin, M., Petelin, D., Juricic, D.: Bearing fault prognostics using Rényi entropy based features and Gaussian process models. Mech. Syst. Signal Process. 52, 327–337 (2015)
Du, S., Lv, J., Xi, L.: Degradation process prediction for rotational machinery based on hybrid intelligent model. Robot. Comput. Integr. Manuf. 28(2), 190–207 (2012)
Goebel, K., Saha, B., Saxena, A.: A comparison of three data-driven techniques for prognostics. In: 62nd Meeting of the Society For MFPT (2008)
Hong, S., Zhou, Z., Zio, E., Wang, W.: An adaptive method for health trend prediction of rotating bearings. Digit. Signal Process. 35, 117–123 (2014)
Jia, F., Lei, Y., Lin, J., Zhou, X., Lu, N.: Deep neural networks: a promising tool for fault characteristic mining and intelligent diagnosis of rotating machinery with massive data. Mech. Syst. Signal Process. 72–73, 303–315 (2016)
Kim, H.E., Tan, A.C., Mathew, J., Kim, E.Y.H., Choi, B.K.: Machine prognostics based on health state estimation using SVM. Asset condition, information systems and decision models (2012)
Kim, J.H.C., Nam H., D.A.: Remaining useful life prediction of rolling element bearings using degradation feature based on amplitude decrease at specific frequencies. Struct. Health Monit. 17, 1095–1109 (2017)
Li, X., Zhang, W., Ding, Q.: Deep learning-based remaining useful life estimation of bearings using multi-scale feature extraction. Reliab. Eng. Syst. Saf. 182, 208–218 (2019)
Loukopoulos, P., et al.: Abrupt fault remaining useful life estimation using measurements from a reciprocating compressor valve failure. MSSP 121, 359–372 (2019)
Mao, W., He, J., Tang, J., Li, Y.: Predicting remaining useful life of rolling bearings based on deep feature representation and long short-term memory neural network. Adv. Mech. Eng. 10(12), 1594–1608 (2018)
Mao, W., He, J., Zuo, M.J.: Predicting remaining useful life of rolling bearings based on deep feature representation and transfer learning. IEEE Trans. Instrum. Meas. 69(4), 1594–1608 (2020)
Mohr, M., Becker, C., Möller, R., Richter, M.: Towards collaborative predictive maintenance leveraging private cross-company data. In: INFORMATIK 2020. Gesellschaft für Informatik, Bonn (2021)
Mohr, M., Wilhelm, F., Hartwig, M., Möller, R., Keller, K.: New approaches in ordinal pattern representations for multivariate time series. In: Proceedings of the 33rd International Florida Artificial Intelligence Research Society Conference (2020)
Nectoux, P., et al.: Pronostia: an experimental platform for bearings accelerated degradation tests. In: Conference on Prognostics and Health Management. (2012)
Ozkat, E.: The comparison of machine learning algorithms in estimation of remaining useful lifetime. In: Proceedings of 9th International BTKS (2019)
Pan, Z., Meng, Z., Chen, Z., Gao, W., Shi, Y.: A two-stage method based on extreme learning machine for predicting the remaining useful life of rolling-element bearings. Mech. Syst. Signal Process. 144, 106899 (2020)
Wang, F., Wang, F., et al.: Remaining life prediction method for rolling bearing based on the long short-term memory network. Neural Process. Lett. 50(3), 2437–2454 (2019). https://doi.org/10.1007/s11063-019-10016-w
Wolpert, D., Macready, W.: No free lunch theorems for optimization. IEEE Trans. Evol. Comput. 1(1), 67–82 (1997)
Wu, J., Wu, C., Cao, S., Or, S.W., Deng, C., Shao, X.: Degradation data-driven time-to-failure prognostics approach for rolling element bearings in electrical machines. IEEE Trans. Ind. Electron. 66(1), 529–539 (2019)
Xue, X., Li, C., Cao, S., Sun, J., Liu, L.: Fault diagnosis of rolling element bearings with a two-step scheme based on permutation entropy and random forests. Entropy 21(1), 96 (2019)
Zhang, B., Zhang, L., Xu, J.: Degradation feature selection for remaining useful life prediction of rolling element bearings. Qual. Reliab. Eng. Int. 32(2), 547–554 (2016)
Acknowledgement
Parts of the content of this paper are taken from the research project KOSMoS. This research and development project is funded by the Federal Ministry of Education and Research (BMBF) in the programme “Innovations for the production, services and work of tomorrow” (funding code 02P17D026) and is supervised by the Projektträger Karlsruhe (PTKA). We also thank Oldendorff Carriers GmbH & Co. KG., Lübeck, Germany for providing data for the case study. The responsibility for the content of this publication is with the authors.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this paper
Cite this paper
Finke, N., Mohr, M., Lontke, A., Züfle, M., Kounev, S., Möller, R. (2021). Recommendations for Data-Driven Degradation Estimation with Case Studies from Manufacturing and Dry-Bulk Shipping. In: Cherfi, S., Perini, A., Nurcan, S. (eds) Research Challenges in Information Science. RCIS 2021. Lecture Notes in Business Information Processing, vol 415. Springer, Cham. https://doi.org/10.1007/978-3-030-75018-3_12
Download citation
DOI: https://doi.org/10.1007/978-3-030-75018-3_12
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-75017-6
Online ISBN: 978-3-030-75018-3
eBook Packages: Computer ScienceComputer Science (R0)