Abstract
The digital acquisition of Cultural Heritage is a complex process, highly depending on the nature of the object as well as the purpose of its detection. Even if there are different survey techniques and sensors that allow the generation of realistic 3D models, defined by a good metric quality and a detail consistent with the geometric characteristics of the object, an interesting goal could be to develop a unified treatment of the methodologies. Villa Rufolo, with its intricate articulation, becomes the benchmark to test an integrated protocol between photogrammetry, Terrestrial Laser Scanning (TLS) and a Wearable Mobile Laser System (WMLS) based on a SLAM approach. To quantify the accuracy of the latter solution, a comparison is proposed. For the case study the ZEB1, produced and marketed by GeoSLAM, is tested. Computations of cloud-to-cloud (C2C) absolute distances is performed, using stationary laser scanner (Faro Focus3D X130) as a reference. Finally, the obtained results are reported, allowing us to assert that the quality of the WMLS measurements is compatible with the data provided by the manufacturer, thus making the instrumentation suitable for certain specific applications.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Garcia-Gago, J., Gomez-Lahoz, J., Rodríguez-Méndez, J., González-Aguilera, D.: Historical single image-based modeling: the case of gobierna tower, Zamora (Spain). Remote Sens. 6(2), 1085–1101 (2014)
Allegra, V., Di Paola, F., Lo , M., Vinci, C.: Scan-to-BIM for the management of heritage buildings: the case study of the castle of maredolce (Palermo, Italy). ISPRS - Int. Arch. Photogram. Remote Sens. Spatial Inform. Sci. XLIII-, 1355–1362 (2020). https://doi.org/10.5194/isprs-archives-XLIII-B2-2020-1355-2020
Remondino, F., El-Hakim, S.: Image-based 3D modelling: a review: image-based 3D modelling: a review. Photogram. Rec. 21(115), 269–291 (2006). https://doi.org/10.1111/j.1477-9730.2006.00383.x
Francois, B.: Review of 20 years of range sensor development. J. Electron. Imaging 13(1), 231–243 (2004). https://doi.org/10.1117/1.1631921
Guidi, G., Beraldin, J.A.: Acquisizione 3D e modellazione poligonale: dall’oggetto fisico al suo calco digitale. Poli. Design 2004, 189 (2004)
Torres-Martínez, J.A., Sánchez-Aparicio, L.J., Hernández-López, D., González-Aguilera, D.: Combining geometrical and radiometrical features in the evaluation of rock art paintings. Digital Appl. Archaeol. Cul. Heritage 5, 10–20 (2017). https://doi.org/10.1016/j.daach.2017.04.001
Sánchez-Aparicio, L.J., Del Pozo, S., Ramos, L.F., Arce, A., Fernandes, F.M.: Heritage site preservation with combined radiometric and geometric analysis of TLS data. Autom. Constr. 85, 24–39 (2018). https://doi.org/10.1016/j.autcon.2017.09.023
Guidi, G., Beraldin, J.-A., Ciofi, S., Atzeni, C.: Fusion of range camera and photogrammetry: a systematic procedure for improving 3-D models metric accuracy. IEEE Trans. Syst. Man Cybern. Part B (Cybernetics) 33(4), 667–676 (2003). https://doi.org/10.1109/TSMCB.2003.814282
Al-Hamad, A., El-Sheimy, N.: Smartphones based mobile mapping systems. Int. Arch. Photogram. Remote Sens. Spatial Inform. Sci. XL–5, 29–34 (2014). https://doi.org/10.5194/isprsarchives-XL-5-29-2014
Limongiello, M., Ronchi, D., Albano, V.: BLK2GO for DTM generation in highly vegetated area for detecting and documenting archaeological earthwork anomalies. In: Proceeding of Metroarchaeo - Metrology for Archaeology and Cultural Heritag (2020)
di Filippo, A., Sánchez-Aparicio, L.J., Barba, S., Martín-Jiménez, J.A., Mora, R., González-Aguilera, D.: Use of a wearable mobile laser system in seamless indoor 3D mapping of a complex historical site. Remote Sens. 10(12), 1897 (2018). https://doi.org/10.3390/rs10121897
Ortiz-Coder, P., Sánchez-Ríos, A.: An integrated solution for 3D heritage modeling based on videogrammetry and V-SLAM technology. Remote Sens. 12(9), 1529 (2020). https://doi.org/10.3390/rs12091529
Di Stefano, F., Gorreja, A., Malinverni, E.S., Mariotti, C.: Knowledge modeling for heritage conservation process: from survey to HBIM implementation. Int. Arch. Photogram. Remote Sens. Spatial Inform. Sci. XLIV-4/W1-2020, 19–26 (2020). https://doi.org/10.5194/isprs-archives-XLIV-4-W1-2020-19-2020
Mandelli, A., Achille, C., Tommasi, C., Fassi, F.: Integration of 3D models and diagnostic analyses through a conservation-oriented information system. Int. Arch. Photogram. Remote Sens. Spatial Inform. Sci. XLII-2/W1-2017, 497–504 (2017). https://doi.org/10.5194/isprs-archives-XLII-2-W5-497-2017
Bosse, M., Zlot, R., Flick, P.: Zebedee: design of a spring-mounted 3-D range sensor with application to mobile mapping. IEEE Trans. Rob. 28(5), 1104–1119 (2012). https://doi.org/10.1109/TRO.2012.2200990
Grisetti, G., Kümmerle, R., Stachniss, C., Burgard, W.: A tutorial on graph-based SLAM. IEEE Intell. Transp. Syst. Mag. 2(4), 31–43 (2010). https://doi.org/10.1109/MITS.2010.939925
Besl, P., McKay, N.: Method for registration of 3-D shapes, vol. 1611. Robotics ‘91. SPIE, (1992)
Chen, Y., Medioni, G.: Object modelling by registration of multiple range images. Image Vis. Comput. 10(3), 145–155 (1992). https://doi.org/10.1016/0262-8856(92)90066-C
Santamaría, J., Cordón, O., Damas, S.: A comparative study of state-of-the-art evolutionary image registration methods for 3D modeling. Comput. Vis. Image Underst. 115(9), 1340–1354 (2011). https://doi.org/10.1016/j.cviu.2011.05.006
Lague, D., Brodu, N., Leroux, J.: Accurate 3D comparison of complex topography with terrestrial laser scanner: application to the Rangitikei canyon (N-Z). ISPRS J. Photogramm. Remote. Sens. 82, 10–26 (2013). https://doi.org/10.1016/j.isprsjprs.2013.04.009
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this paper
Cite this paper
Barba, S., Ferreyra, C., Cotella, V.A., di Filippo, A., Amalfitano, S. (2021). A SLAM Integrated Approach for Digital Heritage Documentation. In: Rauterberg, M. (eds) Culture and Computing. Interactive Cultural Heritage and Arts. HCII 2021. Lecture Notes in Computer Science(), vol 12794. Springer, Cham. https://doi.org/10.1007/978-3-030-77411-0_3
Download citation
DOI: https://doi.org/10.1007/978-3-030-77411-0_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-77410-3
Online ISBN: 978-3-030-77411-0
eBook Packages: Computer ScienceComputer Science (R0)