Abstract
Product manufacturing (SDM) with sustainable design as the core concept is designed and manufactured by optimizing the product life cycle model through the concept of sustainable development. The aging of the population has caused a series of social problems, such as old-age care, medical care and health care, which need to be deeply studied in various fields of society [1]. This paper will discuss the use cases of elderly products, taking lifting bath accessories as an example. Find out the weight factors and influence of design and implementation in the whole life cycle of the product, and play a positive role in product design optimization, especially in application and experience [2]. Based on the background of limited application of this method in non-material design of service types such as welfare design, driven by the concept of sustainable design, the whole life cycle of development, operation, production, use and product is developed through the concept of sustainable ecological design. Prove the case study and application value in the development of such products.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Zhihong, L.: Analysis of the essence and characteristics of population aging. Popul. Over-aging Sci. Res. Ageing (2), 3–10 (2013)
Fang, Y.T.: Analysis of spatial characteristics and related factors of urban aging population data in China. J. Urban Plann. 211(6), 5–66 (2013)
Jian, L., Hui, L., Lifeng, L., et al.: Analysis on the safety design of rehabilitation aids. Packaging, 65–68 (2012)
United Nations. World Population Ageing: 1950–2050 [EB/OL]. http://www.un.org/chinese/esa/ageing/trends.htm
National Bureau of Statistics of the People’s Republic of China. Statistical Bulletin on the Development of Aging (2010). http://www.mps.gov.cn/n16/n1947768/n1950060/3331458.html
Kuicheng, L., Haiyan, C., Xiaoyan, L., et al.: Investigation on the application of rehabilitation aids in patients with severe dysfunction. China Rehabilitation 28 (2013)
Xiangying, Z.: Design of Bath Accessories for Heavy Impaired Persons. Transfer Device Tianjin: Tianjin University of Science and Technology (2012)
Guerra-Zniga, M., Cardemil-Morales, F., Albertz-Arévalo, N.: Explanations for the non-use of hearing aids in a group of older adults. a qualitative study. Acta Otorrinolaringol. Esp. 65(1), 8–14 (2014)
Lifeng, L.: Discussion on Inclusive Products and Frontier Technology in Rehabilitation Accessories China Social Daily 11(4), 003 (2013)
Chen, P.-T., Hsieh, H.-P.: Personalized mobile advertising: its key attributes trends, and social impact. Technol. Forecast. Soc. Change, 543–557 (2012)
Hung, L.-p.: A personalized recommendation system based on product taxonomy for one-to-one marketing online. Expert Syst. Appl. 29, 383–392 (2005)
Moon, J., Chadee, D., Tikoo, S.: Culture, product type, and price influences on consumer purchase intention to buy personalized products online. J. Bus. Res. 61, 31–39 (2008)
Jimenez-Diaz, I., Zafra-Gomez, A., Ballesteros, O.: Analytical methods for the determination of personal care products in human samples: an overview. Talanta 129, 448–458 (2014)
Chowdhury, A., Karmakar, S., Reddy, S.M.: Usability is more valuable predictor than product personality for product choice in human-product physical interaction. Int. J. Ind. Ergon. 44, 697–705 (2014)
Lee, H.C., Lee, J.M., Seo, J.H.: Design and improvement of product using intelligent function model based cost estimating. Expert Syst. Appl. 38, 3131–3141 (2011)
Valckenaers, P., Germain, B.S., Verstraete, P.: Intelligent products: Agere versus Essere. Comput. Ind. 60, 217–228 (2009). https://doi.org/10.1016/j.compind.2008.12.008
Assari, P., Adibi, H., Dehghan, M.: The numerical solution of weakly singular integral equations based on the meshless product integration (MPI) method with error analysis. Appl. Numer. Math. 81, 76–93 (2014). https://doi.org/10.1016/j.apnum.2014.02.013
Brackea, S., Inoueb, M., Ulutasc, B.: CDMF-RELSUS concept: reliable and sustainable products - influences on design, manufacturing, layout integration and use phase. Proc. CIRP 15, 8–13 (2014)
Zhang E. Theory and Methods of Modern Design, vol. 6. Science and Technology Press, Beijing (2007)
Heintz, J., Belaud, J.-P., Pandya, N.: Computer aided product design tool for sustainable product development. Comput. Chem. Eng. 71, 362–376 (2014)
Wang, H., (Kevin) Rong, Y., Li, H.: Computer aided fixture design: recent research and trends. Comput. -Aided Des. 42, 1085–1094 (2010)
Gao Weiguo, X., Yanshen, C.Y.: Generalized modular design principle and method. J. Mech. Eng. 43(6), 48–54 (2007)
Zhang, Yu.: Research into the engineering application of reverse engineering technology. J. Mater. Process. Technol. 139, 472–475 (2003)
Kharmanda, G., Ibrahim, M.-H., Abo Al-kheer, A.: Reliability-based design optimization of shank chisel plough using optimum safety factor strategy. Comput. Electron. Agric. 109, 162–171 (2014)
Vardarlier, P., Vural, Y., Birgiin, S.: Modelling of the strategic recruitment process by axiomatic design principles. Proc. Soc. Behav. Sci. 150, 374–383 (2014). https://doi.org/10.1016/j.sbspro.2014.09.031
Albers, A., Wagner, D., Kern, L.: Adaption of the TRIZ method to the development of electric energy storagesystems. Proc. CIRP 21, 509–514 (2014). https://doi.org/10.1016/j.procir.2014.02.060
Lordelo, A.D.S., Fazzolari, H.A.: On interval goal programming switching surface robust design for Integral Sliding Mode Control. Control Eng. Pract. 32, 136–146 (2014). https://doi.org/10.1016/j.conengprac.2014.07.010
Xingguo, M.: A Study on Some Key Theoretical Issues in Product Systemic Design. Northeast University, Shenyang (2010)
Enriquez, A.H., Binns, M., Kim, J.-K.: Systematic retrofit design with Response Surface Method and process integration techniques: a case study for the retrofit of a hydrocarbon fractionation plant. Chem. Eng. Res. Des. 92, 2052–2070 (2014). https://doi.org/10.1016/j.cherd.2014.02.030
Jinyong, Y.: Generalized positioning expression of product function in conceptual design. Process. Mech. Des. 31(6), 6–12 (2014)
Burattini, C., Bisegna, F., Gugliermetti, F.: A new conceptual design approach for habitative space modules. Acta Astronaut. 97, 1–8 (2014). https://doi.org/10.1016/j.actaastro.2013.12.008
Freitas, F.A., Leonard, L.J.: Maslow’s hierarchy of needs and student academic success. Teach. Learn. Nurs. 6, 9–13 (2011). https://doi.org/10.1016/j.teln.2010.07.004
Duncan, M.K.W., Blugis, A.: Maslow’s needs hierarchy as a framework for evaluating hospitality houses’ resources and services. J. Pediatr. Nurs. 26, 325–331 (2011). https://doi.org/10.1016/j.pedn.2010.04.003
Xidong, C., Xiaodong, Z., Xiaoqiu, F.: Development and application of finite element method. China Manuf. Informatization 39(11), 6–8 (2010)
Gangtian, L.: Ergonomics, pp. 26–32. Peking University Press, Beijing (2012)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this paper
Cite this paper
Li, Y. (2021). Application of Sustainability Design Method for Well-Being Design. In: Gao, Q., Zhou, J. (eds) Human Aspects of IT for the Aged Population. Technology Design and Acceptance. HCII 2021. Lecture Notes in Computer Science(), vol 12786. Springer, Cham. https://doi.org/10.1007/978-3-030-78108-8_4
Download citation
DOI: https://doi.org/10.1007/978-3-030-78108-8_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-78107-1
Online ISBN: 978-3-030-78108-8
eBook Packages: Computer ScienceComputer Science (R0)