Abstract
The paper describes design of smart production system with full digitalization for requirements of Industry 4.0. The system consists of three level of technologies: production technologies, inspection subsystem and digitalization software system. Production technologies creates parts for assembly: small CNC, Rapid prototyping device and standardized parts storage with assisted assembly process by collaborative robot combined with mixed reality device. This system provides assisted assembly work cell. Inspection subsystems consist of RFID readers with passive tags, vision system with basic 3D inspection, multi-spectrum light for error detection and 3D profilometer precise measuring. Digitalization software is represented as Digital Twin model implemented to server, which uses OPC communication for data transfer from production system to Cloud Platform with additional data from IoT devices.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Gorecki, S., Possik, J., Zacharewicz, G., Ducq, Y., Perry, N.: A multicomponent distributed framework for smart production system modeling and simulation. Sustainability 12, 6969 (2020)
Fu, W., Chien, C.F., Tang, L.: Bayesian network for integrated circuit testing probe card fault diagnosis and troubleshooting to empower Industry 3.5 smart production and an empirical study. J. Intell. Manuf. (2020)
Oluyisola, O.E., Sgarbossa, F., Strandhagen, J.O.: Smart production planning and control: concept, use-cases and sustainability implications. Sustainability 12, 3791 (2020)
Dey, B.K., Pareek, S., Tayyab, M., Sarkar, B.: Autonomation policy to control work-in-process inventory in a smart production system. Int. J. Prod. Res. 59(4), 1258–1280 (2020)
Fragapane, G., Ivanov, D., Peron, M., Sgarbossa, F., Strandhagen, J.O.: Increasing flexibility and productivity in Industry 4.0 production networks with autonomous mobile robots and smart intralogistics. Ann. Oper. Res. (2020)
Balog, M., Sokhatska, H., Iakovets, A.: Intelligent systems in the railway freight management. In: Trojanowska, J., Ciszak, O., Machado, J.M., Pavlenko, I. (eds.) MANUFACTURING 2019. LNME, pp. 390–405. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-18715-6_33
Lazár, Ivan, Husár, J.: Validation of the serviceability of the manufacturing system using simulation. J. Effi. Responsib. Educ. Sci. 5, 252–261 (2012)
Hrehova, S.: Predictive model to evaluation quality of the manufacturing process using Matlab tools. In: Procedia Engineering, pp. 149–154. Elsevier Ltd. (2016)
Židek, K., Maxim, V., Sadecký, R.: Diagnostics of errors at component surface by vision recognition in production systems. Appl. Mech. Mater. 616, 227–235 (2014)
Židek, K., Hosovsky, A., Piteľ, J., Bednár, S.: Recognition of assembly parts by convolutional neural networks. In: Hloch, S., Klichová, D., Krolczyk, G.M., Chattopadhyaya, S., Ruppenthalová, L. (eds.) Advances in Manufacturing Engineering and Materials. LNME, pp. 281–289. Springer, Cham (2019). https://doi.org/10.1007/978-3-319-99353-9_30
Židek, K., Lazorík, P., Pitel’, J., Hošovský, A.: An automated training of deep learning networks by 3D virtual models for object recognition. Symmetry 11, 496 (2019)
Zidek, K., Maxim, V., Pitel, J., Hosovsky, A.: Embedded vision equipment of industrial robot for inline detection of product errors by clustering-classification algorithms. Int. J. Adv. Rob. Syst. 13, 1–10 (2016)
Židek, K., Pitel’, J., Adámek, M., Lazorík, P., Hošovskỳ, A.: Digital twin of experimental smart manufacturing assembly system for industry 4.0 concept. Sustainability 12, 3658 (2020)
Clark, J.: Self-calibration and performance control of MEMS with applications for IoT. Sensors 18, 4411 (2018)
Židek, K., Pitel, J.: Smart 3D pointing device based on MEMS sensor and bluetooth low energy. In: Proceedings of the 2013 IEEE Symposium on Computational Intelligence in Control and Automation, CICA 2013 - 2013 IEEE Symposium Series on Computational Intelligence, SSCI 2013, pp. 207–211 (2013)
Acknowledgments
This work was supported by the Slovak Research and Development Agency project VEGA 1/0700/20 Identification of Product Defects using Advanced Object Recognition Techniques with Convolutional Neural Networks, KEGA 055TUKE-4/2020 granted by the Ministry of Education, Science, Research and Sport of the Slovak Republic, Slovak Research and Development Agency under the contracts No. APVV-19-0590.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering
About this paper
Cite this paper
Židek, K., Hladký, V., Pitel’, J., Demčák, J., Hošovský, A., Lazorík, P. (2021). SMART Production System with Full Digitalization for Assembly and Inspection in Concept of Industry 4.0. In: Perakovic, D., Knapcikova, L. (eds) Future Access Enablers for Ubiquitous and Intelligent Infrastructures. FABULOUS 2021. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 382. Springer, Cham. https://doi.org/10.1007/978-3-030-78459-1_13
Download citation
DOI: https://doi.org/10.1007/978-3-030-78459-1_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-78458-4
Online ISBN: 978-3-030-78459-1
eBook Packages: Computer ScienceComputer Science (R0)