Abstract
Since its inception in 1978, the IFIP Working Group (WG) 5.7 on Advances in Production Management Systems (APMS) has played an active role in the fields of production and production management. The Working Group has focused on the conception, development, strategies, frameworks, architectures, processes, methods, and tools needed for the advancement of both fields. The associated standards created by the IFIP WG5.7 have always been impacted by the latest developments of scientific rigour, academic research, and industrial practices. The most recent of those developments involves the Fourth Industrial Revolution, which is having remarkable (r)evolutionary and disruptive changes in both the fields and the standards. These changes are triggered by the fusion of advanced operational and informational technologies, innovative operating and business models, as well as social and environmental pressures for more sustainable production systems. This chapter reviews past, current, and future issues and trends to establish a coherent vision and research agenda for the IFIP WG5.7 and its international community. The chapter covers a wide range of production aspects and resources required to design, engineer, and manage the next generation of sustainable and smart production systems.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Notes
- 1.
- 2.
- 3.
- 4.
- 5.
- 6.
Smart Data is defined as high-quality, accurate, up-to-date, and contextualized data targeted to assist specific business needs such as supporting a more confident AI and human decision-making.
- 7.
References
World Economic Forum: (2020). https://www.weforum.org/platforms/shaping-the-future-of-production
Taisch, M., et al.: World manufacturing forum report – recommendations for the future of manufacturing. World Manufacturing Forum (2018)
Sinha, A., Bernardes, E., Calderon, R., Wuest, T.: Digital Supply Networks. McGraw-Hill, New York (2020)
Rudberg, M., Wikner, J.: Mass customization in terms of the customer order decoupling point. Prod. Plan. Control 15(4), 445–458 (2004)
Duchi, A., Tamburini, F., Parisi, D., Maghazei, O., Schönsleben, P.: From ETO to mass customization: a two-horizon ETO enabling process. In: Bellemare, J., Carrier, S., Nielsen, K., Piller, F.T. (eds.) Managing Complexity. SPBE, pp. 99–113. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-29058-4_8
Vellmar, J., Gepp, M., Schertl, A.: The future of engineering – scenarios of the future way of working in the engineer-to-order business. In: Proceedings of the Annual IEEE International Systems Conference, pp. 1–5 (2017)
Bonev, M.: Enabling mass customization in engineer-to-order industries: a multiple case study analysis on concepts, methods and tools. Ph.D. thesis, DTU (2015)
Wikner, J., Rudberg, M.: Integrating production and engineering perspectives on the customer order decoupling point. Int. J. Oper. Prod. Manag. 25(7), 623–641 (2005)
Cannas, V.G.: Engineering and production alignment in engineer-to-order supply chains. Ph.D. thesis, Politecnico di Milano (2019)
Rossit, D.A., Tohmé, F., Frutos, M.: Industry 4.0: smart scheduling. Int. J. Prod. Res. 57(12), 3802–3813 (2019)
Wuest, T., Schmidt, T., Wei, W., Romero, D.: Towards (pro-)active intelligent products. Int. J. Prod. Lifecycle Manag. 11(2), 154–189 (2018)
Li, H., Palau, A.S., Parlikad, A.K.: A social network of collaborating industrial assets. Proc. Inst. Mech. Eng. Part O: J. Risk Reliab. 232(4), 389–400 (2018)
Kiritsis, D.: Closed-loop PLM for intelligent products in the era of the Internet of Things. Comput. Aided Des. 43(5), 479–501 (2011)
de Oliveira, S.F., Soares, A.L.: A PLM vision for circular economy. In: Camarinha-Matos, L.M., Afsarmanesh, H., Fornasiero, R. (eds.) PRO-VE 2017. IFIP, AICT, vol. 506, pp. 591–602. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-65151-4_52
Macchi, M., Roda, I., Toffoli, L.: Remaining useful life estimation for informed end of life management of industrial assets: a conceptual model. In: Moon, I., Lee, G.M., Park, J., Kiritsis, D., von Cieminski, G. (eds.) APMS 2018. IFIP, AICT, vol. 536, pp. 335–342. Springer, Cham (2018). https://doi.org/10.1007/978-3-319-99707-0_42
Scholz-Reiter, B., Görges, M., Philipp, T.: Autonomously controlled production systems – influence of autonomous control level on logistic performance. CIRP Ann. 58(1), 395–398 (2009)
Guillén, A.J., Crespo, A., Macchi, M., Gómez, J.: On the role of prognostics and health management in advanced maintenance systems. Prod. Plan. Control Manag. Oper. 27(12), 991–1004 (2016)
Cho, S., et al.: A hybrid machine learning approach for predictive maintenance in smart factories of the future. In: Moon, I., Lee, G.M., Park, J., Kiritsis, D., von Cieminski, G. (eds.) APMS 2018. IFIP, AICT, vol. 536, pp. 311–317. Springer, Cham (2018). https://doi.org/10.1007/978-3-319-99707-0_39
Psarommatis, F., Kiritsis, D.: Identification of the inspection specifications for achieving zero defect manufacturing. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 566, pp. 267–273. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-30000-5_34
Psarommatis, F., May, G., Dreyfus, P.-A., Kiritsis, D.: Zero defect manufacturing: state-of-the-art review, shortcomings and future directions in research. Int. J. Prod. Res. 58(1), 1–17 (2020)
Roda, I., Macchi, M.: A framework to embed asset management in production companies. Proc. Inst. Mech. Eng. Part O: J. Risk Reliab. 232(4), 368–378 (2018)
Roda, I., Macchi, M.: Factory-level performance evaluation of buffered multi-state production systems. J. Manuf. Syst. 50, 226–235 (2019)
Roda, I., Arena, S., Macchi, M., Orrù, P.F.: Total cost of ownership driven methodology for predictive maintenance implementation in industrial plants. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 566, pp. 315–322. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-30000-5_40
Polenghi, A., Roda, I., Macchi, M., Trucco, P.: Risk sources affecting the asset management decision-making process in manufacturing: a systematic review of the literature. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 566, pp. 274–282. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-30000-5_35
Nezami, Z., Zamanifar, K., Arena, D., Kiritsis, D.: Ontology-based resource allocation for Internet of Things. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 566, pp. 323–330. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-30000-5_41
Polenghi, A., Roda, I., Macchi, M., Pozzetti, A.: Conceptual framework for a data model to support asset management decision-making process. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 566, pp. 283–290. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-30000-5_36
Lee, J., Ni, J., Djurdjanovic, D., Qiu, H., Liao, H.: Intelligent prognostics tools and E-maintenance. Comput. Ind. 57(6), 476–489 (2006)
Sun, B., Zeng, S., Kang, R., Pecht, M.G.: Benefits and challenges of system prognostics. IEEE Trans. Reliab. 61(2), 323–335 (2012)
Fumagalli, L., Cattaneo, L., Roda, I., Macchi, M., Rondi, M.: Data-driven CBM tool for risk-informed decision-making in an electric arc furnace. Int. J. Adv. Manufact. Technol. 105(1–4), 595–608 (2019)
Romero, D., Wuest, T., Harik, R., Thoben, K.-D.: Towards a cyber-physical PLM environment: the role of digital product models, intelligent products, digital twins, product avatars and digital shadow. In: Proceedings of the 21st IFAC World Congress (2020)
Negri, E., Fumagalli, L., Macchi, M.: A review of the roles of digital twin in CPS-based production systems. Proc. Manufact. 11, 939–948 (2017)
Ashtari Talkhestani, B., et al.: An architecture of an intelligent digital twin in a cyber-physical production system. Automatisierungstechnik 67(9), 762–782 (2019)
Gölzer, P., Fritzsche, A.: Data-driven operations management: organisational implications of the digital transformation in industrial practice. Prod. Plan. Control 28(16), 1332–1343 (2017)
Mittal, S., Khan, M.A., Romero, D., Wuest, T.: Smart manufacturing: characteristics, technologies and enabling factors. J. Eng. Manuf. 233(5), 342–1361 (2017)
Romero, D., Gaiardelli, P., Powell, D., Wuest, T., Thürer, M.: Digital lean cyber-physical production systems: the emergence of digital lean manufacturing and the significance of digital waste. In: Moon, I., Lee, G.M., Park, J., Kiritsis, D., von Cieminski, G. (eds.) APMS 2018. IFIP, AICT, vol. 535, pp. 11–20. Springer, Cham (2018). https://doi.org/10.1007/978-3-319-99704-9_2
Christensen, B., Andersen, A.-L., Medini, K., Brunoe, T.D.: Reconfigurable manufacturing: a case-study of reconfigurability potentials in the manufacturing of capital goods. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 566, pp. 366–374. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-30000-5_46
Medini, K., Andersen, A.L., Wuest, T., Christensen, B., et al.: Highlights in customer-driven operations management research. Proc. CIRP 86, 12–19 (2019)
Wiesner, S., Gaiardelli, P., Gritti, N., Oberti, G.: Maturity models for digitalization in manufacturing – applicability for SMEs. In: Moon, I., Lee, G.M., Park, J., Kiritsis, D., von Cieminski, G. (eds.) APMS 2018. IFIP, AICT, vol. 536, pp. 81–88. Springer, Cham (2018). https://doi.org/10.1007/978-3-319-99707-0_11
Kulvatunyou, B., Ivezic, N., Morris, K., Frechette, S.: Drilling-down on smart manufacturing-enabling composable apps. Manufact. Lett. 10, 14–17 (2016)
Freitag, M., Wiesner, S.: Smart service lifecycle management: a framework and use case. In: Moon, I., Lee, G.M., Park, J., Kiritsis, D., von Cieminski, G. (eds.) APMS 2018. IFIP, AICT, vol. 536, pp. 97–104. Springer, Cham (2018). https://doi.org/10.1007/978-3-319-99707-0_13
Alvela Nieto, M.T., Nabati, E.G., Bode, D., Redecker, M.A., Decker, A., Thoben, K.-D.: Enabling energy efficiency in manufacturing environments through deep learning approaches: lessons learned. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 567, pp. 567–574. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-29996-5_65
Hwang, D., Noh, S.D.: 3D visualization system of manufacturing big data and simulation results of production for an automotive parts supplier. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 567, pp. 381–386. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-29996-5_44
Thoben, K.D., Wiesner, S., Wuest, T.: “Industrie 4.0” and smart manufacturing – a review of research issues and application examples. Int. J. Autom. Technol. 11(1), 4–16 (2017)
Kulvatunyou, B., Oh, H., Ivezic, N., Nieman, S.T.: Standards-based semantic integration of manufacturing information: past, present, and future. J. Manuf. Syst. 52, 184–197 (2019)
Sahal, R., Breslin, J.G., Ali, M.I.: Big data and stream processing platforms for Industry 4.0 requirements mapping for a predictive maintenance use case. J. Manuf. Syst. 54, 138–151 (2020)
Otto, B., Hompel, M., Wrobel, S.: International data spaces. In: Neugebauer, Reimund (ed.) Digital Transformation, pp. 109–128. Springer, Heidelberg (2019). https://doi.org/10.1007/978-3-662-58134-6_8
Schuh, G., Prote, J.-P., Fränken, B., Dany, S., Gützlaff, A.: Reduction of decision complexity as an enabler for continuous production network design. In: Moon, I., Lee, G.M., Park, J., Kiritsis, D., von Cieminski, G. (eds.) APMS 2018. IFIP, AICT, vol. 535, pp. 246–253. Springer, Cham (2018). https://doi.org/10.1007/978-3-319-99704-9_30
Tien, K.-W., Kulvatunyou, B., Jung, K., Prabhu, V.: An investigation to manufacturing analytical services composition using the analytical target cascading method. In: Nääs, I., et al. (eds.) APMS 2016. IFIP, AICT, vol. 488, pp. 469–477. Springer, Cham (2016). https://doi.org/10.1007/978-3-319-51133-7_56
Kulvatunyou, B., Wallace, E., Kiritsis, D., Smith, B., Will, C.: The industrial ontologies foundry proof-of-concept project. In: Moon, I., Lee, G.M., Park, J., Kiritsis, D., von Cieminski, G. (eds.) APMS 2018. IFIP, AICT, vol. 536, pp. 402–409. Springer, Cham (2018). https://doi.org/10.1007/978-3-319-99707-0_50
Brundage, M.P., Kulvatunyou, B., Ademujimi, T., Rakshith, B.: Smart manufacturing through a framework for a knowledge-based diagnosis system. In: Proceedings of the ASME 12th International Manufacturing Science and Engineering Conference (2017)
Romero, D., Flores, M., Herrera, M., Resendez, H.: Five management pillars for digital transformation integrating the lean thinking philosophy. In: Proceedings of the 25th International ICE-Conference on Engineering, Technology and Innovation, pp. 1–8 (2019)
Powell, D., Romero, D., Gaiardelli, P., Cimini, C., Cavalieri, S.: Towards digital lean cyber-physical production systems: Industry 4.0 technologies as enablers of leaner production. In: Moon, I., Lee, G.M., Park, J., Kiritsis, D., von Cieminski, G. (eds.) APMS 2018. IFIP, AICT, vol. 536, pp. 353–362. Springer, Cham (2018). https://doi.org/10.1007/978-3-319-99707-0_44
Womack, J.P., Jones, D.T.: Lean Thinking: Banish Waste and Create Wealth in your Corporation. Simon & Schuster, New York (1996)
Romero, D., Gaiardelli, P., Thürer, M., Powell, D., Wuest, T.: Cyber-physical waste identification and elimination strategies in the digital lean manufacturing world. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 566, pp. 37–45. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-30000-5_5
Netland, T.H., Powell, D.J. (eds.): The Routledge Companion to Lean Management, 1st edn. Routledge, London (2016)
Romero, D., Gaiardelli, P., Powell, D., Wuest, T., Thürer, M.: Total quality management and quality circles in the digital lean manufacturing world. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 566, pp. 3–11. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-30000-5_1
Romero, D., Gaiardelli, P., Powell, D., Wuest, T., Thürer, M.: Rethinking Jidoka systems under automation and learning perspectives in the digital lean manufacturing world. IFAC Pap. Online 52(13), 899–903 (2019)
Romero, D., Bernus, P., Noran, O., Stahre, J., Fast-Berglund, Å.: The Operator 4.0: human cyber-physical systems and adaptive automation towards human-automation symbiosis work systems. In: Nääs, I., et al. (eds.) APMS 2016. IFIP, AICT, vol. 488, pp. 677–686. Springer, Cham (2016). https://doi.org/10.1007/978-3-319-51133-7_80
Romero, D., et al.: Towards an Operator 4.0 typology: a human-centric perspective on the fourth industrial revolution technologies. In: Proceedings of the International Conference on Computers and Industrial Engineering (2016)
Romero, D., Wuest, T., Stahre, J., Gorecky, D.: Social factory architecture: social networking services and production scenarios through the social Internet of Things, services and people for the social Operator 4.0. In: Lödding, H., Riedel, R., Thoben, K.-D., von Cieminski, G., Kiritsis, D. (eds.) APMS 2017. IFIP, AICT, vol. 513, pp. 265–273. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-66923-6_31
Romero, D., Stahre, J., Taisch, M.: The Operator 4.0: towards socially sustainable factories of the future. Comput. Ind. Eng. 139, 106128 (2020)
Kaasinen, E., et al.: Empowering and engaging industrial workers with Operator 4.0 solutions. Comput. Ind. Eng. 139, 105678 (2020)
Romero, D., Noran, O., Stahre, J., Bernus, P., Fast-Berglund, Å.: Towards a human-centred reference architecture for next generation balanced automation systems: human-automation symbiosis. In: Umeda, S., Nakano, M., Mizuyama, H., Hibino, H., Kiritsis, D., von Cieminski, G. (eds.) APMS 2015. IFIP, AICT, vol. 460, pp. 556–566. Springer, Cham (2015). https://doi.org/10.1007/978-3-319-22759-7_64
Rauch, E., Linder, C., Dallasega, P.: Anthropocentric perspective of production before and within Industry 4.0. Comput. Ind. Eng. 139, 105644 (2020)
Ruppert, T., Jaskó, S., Holczinger, T., Abonyi, J.: Enabling technologies for Operator 4.0: a survey. Appl. Sci. 8(9), 1650 (2018)
Munir, S., Stankovic, J.A., et al.: Cyber-physical system challenges for human-in-the-loop control. In: Proceedings of the 8th International Workshop on Feedback Computing, vol. 4, pp. 1–4 (2013)
Jones, A.T., Romero, D., Wuest, T.: Modeling agents as joint cognitive systems in smart manufacturing systems. Manuf. Lett. 17, 6–8 (2018)
Herrington, J., et al.: Immersive learning technologies: realism and online authentic learning. J. Comput. High. Educ. 19(1), 80–99 (2007)
Baalsrud Hauge, J.M., Pourabdollahian, B., Riedel, J.C.K.H.: The use of serious games in the education of engineers. In: Emmanouilidis, C., Taisch, M., Kiritsis, D. (eds.) APMS 2012. IFIP, AICT, vol. 397, pp. 622–629. Springer, Heidelberg (2013). https://doi.org/10.1007/978-3-642-40352-1_78
Pourabdollahian Tehran, B., Oliveira, M.F., Taisch, M., Baalsrud Hauge, J., Riedel, J.C.K.H.: Status and trends of serious game application in engineering and manufacturing education. In: Meijer, S.A., Smeds, R. (eds.) ISAGA 2013. LNCS, vol. 8264, pp. 77–84. Springer, Cham (2014). https://doi.org/10.1007/978-3-319-04954-0_10
Dempsey, M., Riedel, R., Kelly, M.: Serious play as a method for process design. In: Grabot, B., Vallespir, B., Gomes, S., Bouras, A., Kiritsis, D. (eds.) APMS 2014. IFIP, AICT, vol. 438, pp. 395–402. Springer, Heidelberg (2014). https://doi.org/10.1007/978-3-662-44739-0_48
Garbaya, S., et al.: Sensorial virtualization: coupling gaming and virtual environment. J. Adv. Distrib. Learn. Technol. 2(5), 16–30 (2014)
Stefan, I.A., et al.: Using serious games and simulations for teaching co-operative decision-making. Proc. Comput. Sci. 162, 745–753 (2019)
Hallinger, P., et al.: A bibliometric review of research on simulations and serious games used in educating for sustainability, 1997–2019. Clean. Prod. 256, 120358 (2020)
Ordaz, N., Romero, D., Gorecky, D., Siller, H.R.: Serious games and virtual simulator for automotive manufacturing education and training. Proc. Comput. Sci. 75, 267–274 (2015)
Cerinšek, G., et al.: Recommendations to leverage game-based learning to attract young talent to manufacturing education. In: Alcañiz, M., Göbel, S., Ma, M., Fradinho Oliveira, M., Baalsrud Hauge, J., Marsh, T. (eds.) JCSG 2017. LNCS, vol. 10622, pp. 187–202. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-70111-0_18
Vergnano, A., Berselli, G., Pellicciari, M.: Interactive simulation-based-training tools for manufacturing systems operators: an industrial case study. Int. J. Interact. Des. Manuf. 11, 785–797 (2017)
Hořejší, P., Vyšata, J., Rohlíková, L., Polcar, J., Gregor, M.: Serious games in mechanical engineering education. In: Visvizi, A., Lytras, M.D. (eds.) RIIFORUM 2019. SPC, pp. 55–63. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-30809-4_6
Taisch, M., et al.: World manufacturing forum report – skills for the future of manufacturing. In: World Manufacturing Forum (2019)
Erol, S., Jäger, A., Hold, P., et al.: Tangible Industry 4.0: a scenario-based approach to learning for the future of production. Proc. CIRP 54, 13–18 (2016)
Hantono, B.S., et al.: Meta-review of augmented reality in education. In: Proceedings of the International Conference on Information Technology and Electrical Engineering, pp. 312–315 (2018)
Wolf, T.: Intensifying user loyalty through service gamification: motivational experiences and their impact on hedonic and utilitarian value. In: Proceedings of the 40th International Conference in Information Systems (2019)
Smith, N., Wuest, T.: Identifying key aspects of success for product service systems. In: Lödding, H., Riedel, R., Thoben, K.-D., von Cieminski, G., Kiritsis, D. (eds.) APMS 2017. IFIP, AICT, vol. 513, pp. 231–238. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-66923-6_27
Cavalieri, S., Ouertani, Z.M., Zhibin, J., Rondini, A.: Service transformation in industrial companies. Prod. Res. 56(8), 2099–2101 (2018)
Marjanovic, U., Lalic, B., Majstorovic, V., Medic, N., Prester, J., Palcic, I.: How to increase share of product-related services in revenue? Strategy towards servitization. In: Moon, I., Lee, G.M., Park, J., Kiritsis, D., von Cieminski, G. (eds.) APMS 2018. IFIP, AICT, vol. 536, pp. 57–64. Springer, Cham (2018). https://doi.org/10.1007/978-3-319-99707-0_8
Cavalieri, S., Pezzotta, G., Yoshiki, S.: Product-service system engineering: from theory to industrial applications. Comput. Ind. 63(4), 275–277 (2012)
Gaiardelli, P., Martinez, V., Cavalieri, S.: The strategic transition to services: a dominant logic perspective and its implications for operations. Prod. Plan. Control 26(14–15), 1165–1170 (2015)
Baines, T., Bigdeli, A.Z., Bustinza, O.F., Shi, V.G., Baldwin, J., Ridgway, K.: Servitization: revisiting the state-of-the-art and research priorities. Int. Oper. Prod. Manag. 37(2), 256–278 (2017)
Goedkoop, M.J., et al.: Product Service Systems: Ecological and Economic Basics (1999)
Romero, D., Gaiardelli, P., Pezzotta, G., Cavalieri, S.: The impact of digital technologies on services characteristics: towards digital servitization. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 566, pp. 493–501. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-30000-5_61
Marjanovic, U., Rakic, S., Lalic, B.: Digital servitization: the next “Big Thing” in manufacturing industries. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 566, pp. 510–517. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-30000-5_63
Boucher, X., Medini, K., Coba, C.M.: Framework to model PSS collaborative value networks and assess uncertainty of their economic models. In: Camarinha-Matos, L.M., Afsarmanesh, H., Antonelli, D. (eds.) PRO-VE 2019. IFIP, AICT, vol. 568, pp. 541–551. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-28464-0_47
Wiesner, S., Hauge, J.B., Sonntag, P., Thoben, K.-D.: Applicability of agile methods for dynamic requirements in smart PSS development. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 566, pp. 666–673. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-30000-5_81
Moser, B., Kampker, A., Jussen, P., Frank, J.: Organization of sales for smart product service systems. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 566, pp. 518–526. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-30000-5_64
Sala, R., Pezzotta, G., Pirola, F., Huang, G.Q.: Decision-support system-based service delivery in the product-service system context: literature review and gap analysis. Proc. CIRP 83, 126–131 (2019)
Sala, R., Zanetti, V., Pezzotta, G., Cavalieri, S.: The role of technology in designing and delivering product-service systems. In: Proceedings of the IEEE Conference, Funchal, Portugal (2017)
Baines, T., Shi, V.G.: Delphi study to explore the adoption of servitization in UK companies. Prod. Plan. Control 26(14–15), 1171–1187 (2015)
Kowalkowski, C., Gebauer, H., et al.: Servitization and deservitization: overview, concepts, and definitions. Ind. Mark. Manag. 60, 4–10 (2017)
Wiesner, S., Westphal, I., Hirsch, M., Thoben, K.-D.: Manufacturing service ecosystems. In: Emmanouilidis, C., Taisch, M., Kiritsis, D. (eds.) APMS 2012. IFIP, AICT, vol. 398, pp. 305–312. Springer, Heidelberg (2013). https://doi.org/10.1007/978-3-642-40361-3_39
Pirola, F., Pezzotta, G., Andreini, D., Galmozzi, C., Savoia, A., Pinto, R.: Understanding customer needs to engineer product-service systems. In: Grabot, B., Vallespir, B., Gomes, S., Bouras, A., Kiritsis, D. (eds.) APMS 2014. IFIP, AICT, vol. 439, pp. 683–690. Springer, Heidelberg (2014). https://doi.org/10.1007/978-3-662-44736-9_83
Rondini, A., Tornese, F., Gnoni, M., Pezzotta, G., Pinto, R.: Business process simulation for the design of sustainable product service systems (PSS). In: Umeda, S., Nakano, M., Mizuyama, H., Hibino, H., Kiritsis, D., von Cieminski, G. (eds.) APMS 2015. IFIP, AICT, vol. 460, pp. 646–653. Springer, Cham (2015). https://doi.org/10.1007/978-3-319-22759-7_74
Alexopoulos, K., Koukas, S., Boli, N., Mourtzis, D.: Resource planning for the installation of industrial product service systems. In: Lödding, H., Riedel, R., Thoben, K.-D., von Cieminski, G., Kiritsis, D. (eds.) APMS 2017. IFIP, AICT, vol. 514, pp. 205–213. Springer, Cham (2017). https://doi.org/10.1007/978-3-319-66926-7_24
Orellano, M., Medini, K., Lambey-Checchin, C., Norese, M.-F., Neubert, G.: A multi-criteria approach to collaborative product-service systems design. In: Ameri, F., Stecke, K.E., von Cieminski, G., Kiritsis, D. (eds.) APMS 2019. IFIP, AICT, vol. 567, pp. 481–489. Springer, Cham (2019). https://doi.org/10.1007/978-3-030-29996-5_56
Rust, R.T.: If everything is service, why is this happening now, and what difference does it make? Invited commentaries on evolving to a new dominant logic for marketing. J. Mark. 68(1), 18–27 (2004)
Romero, D., Stahre, J.: Social sustainability of future manufacturing – challenges and strategies: an essay. In the world manufacturing forum report – skills for the future of manufacturing. In: World Manufacturing Forum (2019)
Khan, M., Mittal, S., West, S., Wuest, T.: Review on upgradability – a product lifetime extension strategy in the context of product-service systems. Clean. Prod. 204, 1154–1168 (2018)
Acknowledgements and Disclaimer
The co-authors would like to acknowledge the contributions of the IFIP WG5.7 members to the definition of these “Seven Grand Challenges” for Production and Production Management towards 2030. Any mention of commercial products is for information only; it does not imply recommendation or endorsement by the IFIP WG5.7 or NIST.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 IFIP International Federation for Information Processing
About this chapter
Cite this chapter
Romero, D. et al. (2021). Advances in Production Management Systems: Issues, Trends, and Vision Towards 2030. In: Goedicke, M., Neuhold, E., Rannenberg, K. (eds) Advancing Research in Information and Communication Technology. IFIP Advances in Information and Communication Technology(), vol 600. Springer, Cham. https://doi.org/10.1007/978-3-030-81701-5_8
Download citation
DOI: https://doi.org/10.1007/978-3-030-81701-5_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-81700-8
Online ISBN: 978-3-030-81701-5
eBook Packages: Computer ScienceComputer Science (R0)