Abstract
Lightweight vehicle bodies have become the development trend in auto industry, so the self-pierce riveting (SPR) technology has attracted extensive attention. This paper proposes a novel control approach of the flexible servo riveting gun based on SPR technology. First, this paper briefly introduces the riveting procedure based on the mechanical structure of servo riveting gun. Then the riveting quality inspection rules of traditional riveting guns are used for reference to plan the force-position curve in riveting process autonomously, and the cubic spline curve is adopted to construct the force trajectory. To control this planned force trajectory, riveting force measured by sensor is fed back into the closed-loop control. According to the deviation between theoretical and actual riveting force, the set value of riveting speed is changed based on admittance control algorithm, so the servo motor’s torque is indirectly controlled to make the riveting force reach the set value. Finally, the control approach is applied to the servo riveting system designed by our lab. Riveting results show the feasibility of proposed control approach.
Supported by the Shandong Provincial Key Research and Development Program under Grant No. 2019JZZY010441.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Wang, T.T., Wagner, J.: Advanced engine cooling system subjected to ram air effect-nonlinear adaptive multiple input and multiple output (NAMIMO) control. IEEE Trans. Veh. Technol. 66(9), 7730–40 (2017)
Briskham, P., Blundell, N., Han, L., Hewitt, R., Young, K., Boomer, D.: Comparison of Self-Pierce Riveting. Resistance Spot Welding and Spot Friction Joining for aluminium automotive sheet, SAE Technical Papers (2006)
Han, L., Thornton, M., Shergold, M.: A comparison of the mechanical behaviour of self-piercing riveted and resistance spot welded aluminium sheets for the automotive industry. Mater. Eng. 31(3), 1457–67 (2010)
He, X., Pearson, I., Young, K.: Self-pierce riveting for sheet materials: state of the art. J. Mater. Proces. Techno. 199(1), 27–36 (2008)
Mori, K., Abe, Y., Kato, T.: Self-pierce riveting of multiple steel and aluminium alloy sheets. J. Mater. Proces. Technol. 214(10), 2002–2008 (2014)
Zhang, X., He, X., Xing, B., Wei, W., Lu, J.: Quasi-static and fatigue characteristics of self-piercing riveted joints in dissimilar aluminium-lithium alloy and titanium sheets. J. Mater. Res. Technol. 9(3), 5699–5711 (2020)
Haque, R.: Quality of self-piercing riveting (SPR) joints from cross-sectional perspective: a review. Arch. Civil Mech. Eng. 18(1), 83–93 (2017). https://doi.org/10.1016/j.acme.2017.06.003
Hou, W., Mangialardi, E., Hu, S.J., Wang, P.C., Menassa, R.: Characterization for quality monitoring of a self-piercing riveting process. In: Proceedings of the Sheet Metal Welding Conference XI (2004)
Haque, R., Durandet, Y.: Investigation of self-pierce riveting (SPR) process data and specific joining events. J. Manuf. Process. 30, 148–160 (2017)
Oh, S., Kim, H.K., Jeong, T., Kam, D., Ki, H.: Deep-learning-based predictive architectures for self-piercing riveting process. IEEE Access 8, 116254–116267 (2020)
Liu, Y., Li, H., Zhao, H., Liu, X.: Effects of the die parameters on the self-piercing riveting process. Int. J. Adv. Manuf. Technol. 1, 3353–3368 (2019). https://doi.org/10.1007/s00170-019-04567-4
Jiang, H., Gao, S., Li, G., Cui, J.: Structural design of half hollow rivet for electromagnetic self-piercing riveting process of dissimilar materials. Mater. Des. 183, 108141 (2019)
Zhao, H., Han, L., Liu, Y., Liu, X.: Modelling and interaction analysis of the self-pierce riveting process using regression analysis and FEA. Int. J. Adv. Manuf. Technol. 1, 159–176 (2021). https://doi.org/10.1007/s00170-020-06519-9
Piegl, L., Tiller, W.: The NURBS Book, 2nd edn. Springer, Berlin (2003)
Deb, K., Pratap, A., Agarwal, S., Meyarivan, T.: A fast and elitist multiobjective genetic algorithm: NSGA-II. IEEE Tans. Evol. Comput. 6(2), 182–197 (2002)
Amar, J., Nagase, K.: Genetic-algorithm-based global design optimization of tree-type robotic systems involving exponential coordinates. Mech. syst. sig. Process. 156, 107461 (2021)
Calanca, A., Muradore, R., Fiorini, P.: A review of algorithms for compliant control of stiff and fixed-compliance robots. IEEE/ASME Trans. Mech. 21(2), 613–624 (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this paper
Cite this paper
Liu, Y., Tang, Q., Tian, X., Ma, L. (2021). A Novel Control Approach of the Flexible Servo Riveting Gun Based on Self-pierce Riveting Technology. In: Liu, XJ., Nie, Z., Yu, J., Xie, F., Song, R. (eds) Intelligent Robotics and Applications. ICIRA 2021. Lecture Notes in Computer Science(), vol 13016. Springer, Cham. https://doi.org/10.1007/978-3-030-89092-6_24
Download citation
DOI: https://doi.org/10.1007/978-3-030-89092-6_24
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-89091-9
Online ISBN: 978-3-030-89092-6
eBook Packages: Computer ScienceComputer Science (R0)