Abstract
Variable stiffness is the focus and difficulty in the research of soft robotics technology, and the variable stiffness of the multi-degree-of-freedom (MDOF) soft structure is more challenging. Inspired by the transverse and longitudinal muscle structure of octopus arms, using parallel and spiral pneumatic artificial muscles (PAMs) to imitate the transverse and longitudinal muscle structure respectively, and then the MDOF movement and variable stiffness function of a soft finger can be realized by the mutual coupling of PAMs. Based on the rigid-flexible-soft design strategy, a rigid frame is embedded in the spiral PAM, which improves the regularity and stability of the finger module movement, and provides a good hardware foundation for simplifying theoretical model. A dexterous gripper is designed based on the MDOF variable stiffness finger module, which has four grasping modes, such as non-parallel bending inward, non-parallel bending outward, parallel bending inward, and parallel bending outward. Then the kinematics model of the soft finger is established based on the assumption of constant curvature and its workspace is solved. The MDOF variable stiffness performance of the finger module is experimentally analyzed, and a multi-target grasping experiment is carried out. It is proved that the dexterous gripper has good adaptability and flexibility, and experimental results show that the load capacity of the soft gripper can be improved by this variable stiffness method. This research provides a theoretical and technical reference for the development of MODF soft structures with variable stiffness.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Lee, C., et al.: Soft robot review. Int. J. Control Autom. Syst. 15(1), 3–15 (2016). https://doi.org/10.1007/s12555-016-0462-3
Pfeifer, R., Lungarella, M., Iida, F.: The challenges ahead for bio-inspired soft robotics. Commun. ACM 55(11), 76–87 (2012)
Rus, D., Tolley, M.T.: Design, fabrication and control of soft robots. Nature 521(7553), 467–475 (2015)
Drotman, D., Ishida, M., Jadhav, S., Tolley, M.T.: Application-driven design of soft, 3D printed, pneumatic actuators with bellows. IEEE/ASME Trans. Mechatron. 24(1), 78–87 (2018)
Calisti, M., Giorelli, M., Levy, G., et al.: An octopus-bioinspired solution to movement and manipulation for soft robots. Bioinspir. Biomim. 6(3), 2–12 (2011)
Calisti, M., Arienti, A., Giannaccini, M.E., et al.: Study and fabrication of bioinspired Octopus arm mockups tested on a multipurpose platform. In: IEEE Ras & Embs International Conference on Biomedical Robotics & Biomechatronics 2010, pp. 461–466. IEEE, Tokyo, (2010). https://doi.org/10.1109/BIOROB.2010.5625959
Guglielmino, E., Tsagarakis, N., Caldwell, D.G.: An octopus anatomy-inspired robotic arm. In: International Conference on Intelligent Robots & Systems 2010, pp. 3091–3096. IEEE, Taipei (2010). https://doi.org/10.1109/IROS.2010.5650361
Walker, I.D., Kier, W.M., Rahn, C.D., et al.: Continuum robot arms inspired by cephalopods. In: Proceedings of SPIE-The International Society for Optical Engineering 2005, vol. 5804, pp. 303–314. SPIE, USA (2005)
Jones, B.A., Walker, I.D.: Three-dimensional modeling and display of continuum robots. In: International Conference on Intelligent Robots and Systems 2006, pp. 5872–5877. IEEE, Beijing (2006). https://doi.org/10.1109/IROS.2006.282464.
Giri, N., Walker, I.: Continuum robots and underactuated grasping. Mech. Sci. 2(1), 51–58 (2011)
Hao Y, Gong Z, Xie Z, et al.: Universal soft pneumatic robotic gripper with variable effective length. In: Proceedings of the 35th Chinese Control Conference 2016, pp. 6109–6114. IEEE, Chengdu (2016). https://doi.org/10.1109/ChiCC.2016.7554316
Wang, Z., Polygerinos, P., Overvelde, J.T.B., et al.: Interaction forces of soft fiber reinforced bending actuators. IEEE/ASME Trans. Mechatron. 22(2), 717–727 (2017)
Jiang, P., Yang, Y.D., Chen, M.Z.Q., et al.: A variable stiffness gripper based on differential drive particle jamming. Bioinspiration Biomimetics 14(3), 036009 (2019)
Jiang, A., Ranzani, T., Gerboni, G., et al.: Robotic granular jamming: does the membrane matter? Soft Rob. 1(3), 192–201 (2014)
Bamotra, A., Walia, P., Prituja, A.V., et al.: Layer-jamming suction grippers with variable stiffness. J. Mech. Robot. 11(3), 035003 (2019)
Hassanin, A.F., Samis, N.M., Theo, T., et al.: The design and mathematical model of a novel variable stiffness extensor-contractor pneumatic artificial muscle. Soft Rob. 5(5), 576–591 (2018)
Yoshida, S., Morimoto, Y., Zheng, L.Y., et al.: Multipoint bending and shape retention of a pneumatic bending actuator by a variable stiffness endoskeleton. Soft Rob. 5(6), 718–725 (2018)
Zhang, Y.F., Zhang, N.B., Hingorani, H., et al.: Fast-response, stiffness-tunable soft actuator by hybrid multimaterial 3D printing. Adv. Funct. Mater 29(15), 1806698 (2019)
Xie, Z.X., Domel, A.G., An, N., et al.: Octopus arm-inspired tapered soft actuators with suckers for improved grasping. Soft Rob. 7(5), 639–648 (2020)
Laschi, C., Cianchetti, M., Mazzolai, B., et al.: Soft robot arm inspired by the octopus. Adv. Robot. 26(7), 709–727 (2012)
Trivedi, D., Rahn, C.D., Kier, W.M., et al.: Soft robotics: biological inspiration, state of the art, and future research. Appl. Bionics Biomech. 5(3), 99–117 (2008)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this paper
Cite this paper
Zhou, P., Yao, J., Zhang, X., Zhao, Y. (2021). Design and Analysis of a Muti-Degree-of-Freedom Dexterous Gripper with Variable Stiffness. In: Liu, XJ., Nie, Z., Yu, J., Xie, F., Song, R. (eds) Intelligent Robotics and Applications. ICIRA 2021. Lecture Notes in Computer Science(), vol 13013. Springer, Cham. https://doi.org/10.1007/978-3-030-89095-7_13
Download citation
DOI: https://doi.org/10.1007/978-3-030-89095-7_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-89094-0
Online ISBN: 978-3-030-89095-7
eBook Packages: Computer ScienceComputer Science (R0)