Abstract
The personnel burden is an issue with the visual inspection of welding defects that occur in bend test fragments. This study aims to construct an automatic evaluation system for welding defects that occur in bend test fragments. This paper describes the automatic detection of defective areas from bend test fragments using R-CNN. First, we have described the structure of the proposed R-CNN, followed by the experiments for evaluating R-CNN and their results. Finally, we have provided a conclusion and discussed future issues.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Niles, R.W., Jackson, C.E.: Weld thermal efficiency of the GTAW process. Weld. J. 54, 25–32 (1975)
Asai, S., Ogawa, T., Takebayashi, H.: Visualization and digitation of welder skill for education and training. Weld. World 56, 26–34 (2012)
Byrd, A.P., Stone, R.T., Anderson, R.G., Woltjer, K.: The use of virtual welding simulators to evaluate experimental welders. Weld. J. 94(12), 389–395 (2015)
Hino, T., et al.: Visualization of gas tungsten arc welding skill using brightness map of backside weld pool. Trans. Mat. Res. Soc. Jpn. 44(5), 181–186 (2019)
Kato, S., Hino, T., Yoshikawa, N.: Fundamental study on evaluation system of beginner’s welding using CNN. In: Barolli, L., Hellinckx, P., Natwichai, J. (eds.) 3PGCIC 2019. LNNS, vol. 96, pp. 821–827. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-33509-0_77
Kato, S., Hino, T., Kumeno, H., Kagawa, T., Nobuhara, H.: Automatic detection of beginner's welding joint. In: Proceedings of 2020 Joint 11th International Conference on Soft Computing and Intelligent Systems and 21st International Symposium on Advanced Intelligent Systems, pp. 465–467 (2020)
Kato, S., et al.: Evaluation for angular distortion of welding plate. In: Arai, K. (ed.) IntelliSys 2021. LNNS, vol. 294, pp. 344–354. Springer, Cham (2022). https://doi.org/10.1007/978-3-030-82193-7_23
Islamovic, F., Muratovic, P., Gaco, D., Kulenovic, F.: Bend testing of the welded joints. In: Proceedings of 7th International Scientific Conference on Production Engineering, pp.1–6 (2009)
Park, J.-K., An, W.-H., Kang, D.-J.: Convolutional neural network based surface inspection system for non-patterned welding defects. Int. J. Precis. Eng. Manufact. 20(3), 363–374 (2019)
Dung, C.V., Sekiya, H., Hirano, S., Okatani, T., Miki, C.: A vision-based method for crack detection in gusset plate welded joints of steel bridges using deep convolutional neural networks. Autom. Constr. 102, 217–229 (2019)
Zhang, Z., Wen, G., Chen, S.: Weld image deep learning-based on-line defects detection using convolutional neural networks for Al alloy in robotic arc welding. J. Manufact. Processes 45, 208–216 (2019)
Zhang, Z., Li, B., Zhang, W., Lu, R., Wada, S., Zhang, Y.: Real-time penetration state monitoring using convolutional neural network for laser welding of tailor rolled blanks. J. Manufact. Syst. 54, 348–360 (2020)
Dai, W., et al.: Deep learning assisted vision inspection of resistance spot welds. J. Manufact. Processes 62, 262–274 (2021)
Abdelkader, R., Ramou, N., Khorchef, M., Chetih, N., Boutiche, Y.: Segmentation of x-ray image for welding defects detection using an improved Chan-Vese model. In: Materials Today: Proceedings, Part 5, vol.42, pp. 2963–2967 (2021)
Xu, Y., Wang, Z.: Visual sensing technologies in robotic welding: recent research developments and future interests. Sens. Actuat. A: Phys. 320, 112551 (2021)
Zitnick, C.L., Dollár, P.: Edge boxes: locating object proposals from edges. In: Fleet, D., Pajdla, T., Schiele, B., Tuytelaars, T. (eds.) ECCV 2014. LNCS, vol. 8693, pp. 391–405. Springer, Cham (2014). https://doi.org/10.1007/978-3-319-10602-1_26
Krizhevsky, A., Sutskever, I., Hinton, G.E.: ImageNet classification with deep convolutional neural networks. In: Proceedings of the 25th International Conference on Neural Information Processing Systems (NIPS 2012), pp.1097–1105 (2012)
Mathworks. https://jp.mathworks.com/help/vision/ug/getting-started-with-r-cnn-fast-r-cnn-and-faster-r-cnn.html?lang=en. Accessed 29 July 2021
Shin, H.C., et al.: Deep convolutional neural networks for computer-aided detection: CNN architectures, dataset characteristics and transfer learning. IEEE Trans. Med. Imag. 35(5), 1285–1298 (2016)
Acknowledgments
The authors would like to thank Enago (www.enago.jp) for the English language review and Ueno and Maeda in MathWorks for technical advice.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Kato, S., Hino, T., Kume, S., Nobuhara, H. (2022). Crack Detection from Weld Bend Test Images Using R-CNN. In: Barolli, L. (eds) Advances on P2P, Parallel, Grid, Cloud and Internet Computing. 3PGCIC 2021. Lecture Notes in Networks and Systems, vol 343. Springer, Cham. https://doi.org/10.1007/978-3-030-89899-1_31
Download citation
DOI: https://doi.org/10.1007/978-3-030-89899-1_31
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-89898-4
Online ISBN: 978-3-030-89899-1
eBook Packages: EngineeringEngineering (R0)