Abstract
With the acceleration of the development process of various industries, the demand for high-end CNC lathes in the manufacturing industry is increasing, and the development of CNC lathes has great potential to create new opportunities while facing challenges. Desktop CNC lathes reduce cost and volume to a certain extent, this paper puts forward the joint dual STM32 and FPGA embedded numerical control system, re-divide the processing mode, design the corresponding hardware and software system, after laboratory verification, the experiment proves that the embedded CNC system can meet the general CNC processing needs.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Huang, Z., Zhao, K.: Design of 5-axis CNC machine tool based on MACH3. Mach. Manuf. Self Dynamic 2, 11–14 (2018)
Zhou, D.: Development of SOFT-type CNC Numerical Control System Control Software. Zhejiang UniversityStudies, Hangzhou (2004)
Ian, H., et al.: Open CNC system of micro lathe based on USB busSystematic research and design. Mach. Tool Hydraulics. 48(1), 51–56, 78 (2020)
Song, K., et al. Embedded data of micro lathe based on STM32+FPGA control system research and design. Manuf. Technol. Mach. Tool. (3), 67–73, 77 (2019 )
Zhao, M.: Design and implementation of CNC system based on embedded Linux. Micro. Appl. 35(9), 12–13, 25 (2019)
Li, G.: Design of embedded CNC system based on ARM and FPGA. Autom. Technol. Appl. 37(10), 129–135 (2018)
Qu, J.: Research and Development of Embedded CNC System Based on ARM and Linux. Nanjing University of Aeronautics and Astronautics, South Beijing (2013)
Jiang, X.: Research on real-time realization of embedded CNC system based on Xenomai. Electronic Test (16), 68–69, 102 (2019)
Du, X., et al.: Windows real-time improvement based on resource reallocation made. Microelectronics and Computer. 29(5): 95–98,103 (2012)
Huang, J., et al.: Optimized design of desktop CNC lathe structure. China Section Technical Papers 11(10), 1143–1146 (2016)
Xie, O., Li, H., Li, Y.: The communication between ARM and touch screen in the embedded CNC system of internal grinder Letter realization. Precis. Manuf. Autom. 3, 42–44 (2008)
Hu, Z., Rao, G., Li, X.: The design and development of the dual-axis control system of the CNC slicing machine. Computer Meas. Control 22(5), 1461–1463 (2014)
Hong, S., Xu, J., Wu, S.: Design of G code interpretation module of embedded numerical control system and realization. Mech. Des. Manuf. 11, 37–39 (2012)
Kang, J.: Research on C-Function Tool Radius Compensation Technology of CNC Machine Tool. Hefei Workers Industry University, Hefei (2009)
Hua, M., Cao, J.: Algorithm for realizing economical CNC system C tool offset creation and cancellation research. Modern Manuf. Eng. (2), 37–39, 21 (2007)
Yan, Y., Zhang, F.: Numerical Control Technology. Tsinghua University Press, Beijing (2012)
Zhu, C.: Forward Planning Algorithm for Path And Speed of CNC System For High-Speed Machining of Continuous Micro-Line Segments Research. Zhejiang University, Hangzhou (2018)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering
About this paper
Cite this paper
Rui, E. (2022). Design and Application of a Desktop CNC Lathe Control System. In: Shi, S., Ma, R., Lu, W. (eds) 6GN for Future Wireless Networks. 6GN 2021. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 439. Springer, Cham. https://doi.org/10.1007/978-3-031-04245-4_15
Download citation
DOI: https://doi.org/10.1007/978-3-031-04245-4_15
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-04244-7
Online ISBN: 978-3-031-04245-4
eBook Packages: Computer ScienceComputer Science (R0)