Abstract
Reasonable machining trajectory planning could increase the robotic maneuverability and productivity, which is a research hotspot in the field of robotic grinding, especially for large complicated components. To overcome the machining area planning challenges, an optimal robotic machining trajectory planning approach is presented by creating the robot joint configuration model. To begin, a global trajectory planning approach based on the strong surface consistency of a high-speed railway body is proposed to ensure the continuity of robot motion and the optimal configuration. The high-speed railway body is then divided into different areas to ensure robotic accessibility. Finally, the simulation experiment is employed to obtain the appropriate robotic machining trajectory and working attitude, which effectively enhance robotic accessibility and vastly increase processing efficiency and surface quality in the actual robotic grinding of high-speed railway body.
Supported by the National Key R &D Program of China (No. 2019YFA0706703), the National Nature Science Foundation of China (Nos. 52105514, 52075204).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zhu, D., et al.: Robotic grinding of complex components: a step towards efficient and intelligent machining - challenges, solutions, and applications. Robot Cim-Int. Manuf. 65, 101908 (2020)
Zhao, X., Tao, B., Qian, L., Yang, Y., Ding, H.: Asymmetrical nonlinear impedance control for dual robotic machining of thin-walled workpieces. Robot Cim-Int. Manuf. 63, 101889 (2020)
Xu, X., Chen, W., Zhu, D., Yan, S., Ding, H.: Hybrid active/passive force control strategy for grinding marks suppression and profile accuracy enhancement in robotic belt grinding of turbine blade. Robot Cim-Int. Manuf. 67, 102047 (2021)
Ren, S., Yang, X., Xu, J., Wang, G., Xie, Y., Chen, K.: Determination of the base position and working area for mobile manipulators. Assem. Autom. 36, 80–88 (2016)
Tao, B., Zhao, X.W., Ding, H.: Mobile-robotic machining for large complex components: A review study. Sci. China Technol. Sci. 62(8), 1388–1400 (2019). https://doi.org/10.1007/s11431-019-9510-1
Diao, S., Chen, X., Wu, L., Yang, M., Liu, J.: The optimal collision avoidance trajectory planning of redundant manipulators in the process of grinding ceramic billet surface. Math Probl. Eng 2017, 1–12 (2017)
Lv, Y., Peng, Z., Qu, C., Zhu, D.: An adaptive trajectory planning algorithm for robotic belt grinding of blade leading and trailing edges based on material removal profile model. Robot Cim-Int. Manuf. 66, 101987 (2020)
Pajak, G.: Trajectory planning for mobile manipulators with vibration reduction. J. Vibroeng. 23, 877–890 (2021)
Beschi, M., et al.: Optimal robot motion planning of redundant robots in machining and additive manufacturing applications. Electronics 8, 1473–1491 (2019)
Rocha, C., Tonetto, C.P., Dias, A.: A comparison between the Denavit-Hartenberg and the screw-based methods used in kinematic modeling of robot manipulators. Robot Cim-Int. Manuf. 27(4), 723–728 (2011)
Diankov, R., Rybski, P.: Automated construction of robotic manipulation programs. Carnegie Mellon University (2010)
Atef, A.A.: Optimal trajectory planning of manipulators: a review. J. Eng. Sci. Technol. 2(1), 32–54 (2007)
Lynch, K.M., Park, F.C.: Modern robotics: mechanics, planning, and control. IEEE Control Syst. Mag. 39, 100–102 (2017)
Zargarbashi, S.H.H., Khan, W., Angeles, J.: Posture optimization in robot-assisted machining operations. Mech. Mach. Theory 51, 74–86 (2012)
Constantinescu, D., Croft, E.: Smooth and time-optimal trajectory planning for industrial manipulators along specified paths. J. Robot Syst. 17(5), 233–249 (2020)
Dong, J., Yu, T., Chen, H., Li, B.: An improved calculation method for cutting contact point and tool orientation analysis according to the CC points. Precis. Eng. 61, 1–13 (2019)
Liu, M.: Research on NURBS interpolation for NC machining. Huazhong University of Science and Technology (2015)
Sun, H.: Research on real-time algorithms of NURBS tool-paths interpolation. National University of Defense Technology (2008)
Giri, V., Bezbaruah, D., Bubna, P., Choudhury, A.R.: Selection of master cutter paths in sculptured surface machining by employing curvature principle. Int. J. Mach. Tool Manuf. 10, 1202–1209 (2005)
He, W., Lei, M., Bin, H.: Isoparametric CNC tool path optimization based on adaptive grid generation. Int. J. Adv. Manuf. Tech. 41, 538–548 (2009)
Griffiths, J.G.: Tool path based on Hilbert’s curve. Comput. Aid. Des. 26(11), 839–844 (1994)
Han, Z., Yang, D., Chuang, J.: Isophote based ruled surface approximation of free-form surfaces and its application in NC machining. Int. J. Prod. Res. 9, 1911–1930 (2001)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Xu, X., Ye, S., Yang, Z., Yan, S., Ding, H. (2022). Global Optimal Trajectory Planning of Mobile Robot Grinding for High-Speed Railway Body. In: Liu, H., et al. Intelligent Robotics and Applications. ICIRA 2022. Lecture Notes in Computer Science(), vol 13457. Springer, Cham. https://doi.org/10.1007/978-3-031-13835-5_44
Download citation
DOI: https://doi.org/10.1007/978-3-031-13835-5_44
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-13834-8
Online ISBN: 978-3-031-13835-5
eBook Packages: Computer ScienceComputer Science (R0)