Abstract
Combining mobility with assistance for the interaction with the environment is not a common issue in designing and developing a robotized wheelchair. This work describes a robotic hybrid platform that combines mobility with assistance to the user for actuation in its environment. It is conceived for wheelchair users having limited upper limbs actuation. This hybrid platform, a chair-exoskeleton architecture, faces the challenge of providing the required degrees of freedom to achieve an acceptable performance without having a significant implication in weight, size and cost, which increase would limit its real applicability and affordability. Therefore, its design looks for a solution that combines chair performances by providing mobility, posture and manipulation accessibility, with those of an exoskeleton which allow users with some remaining arms mobility to reach and manipulate objects either on the floor, at seating level, or at high level shelters. This paper describes the preliminary design of the wheelchair and the simulation of its operativity to deal with the required user interaction with the environment and points out the need of an intuitive and adapted interface for its control.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Observer-Mobility: All-terrain wheelchair (2015). http://www.observerMobility.com
Toyota Motor East Japan: Patrafour (2015)
Grewal, H.S.. et al.: Autonomous wheelchair navigation in unmapped indoor environments. In: IEEE International Instrumentation and Measurement Technology Conference (I2MTC), Houston, TX, pp. 1–6 (2018)
Yukselir, M., Scarrow, K., Wilson, P., Cowan, T.: The brains behind the electric wheelchair, one of Canada’s ‘great artifacts’. The Globe and Mail, 27 August 2012
Standing wheelchair Genie V.20: EasyRise Ltd. (2019)
Deka-Research: Stair climbing wheelchair iBot (2015)
Nakajima, S.: Concept of a personal mobility vehicle for daily life. In: IEEE International Conference on Robotics and Automation (2016)
Hsu, P.E., Hsu, Y.L., Lu, J.M., Chang, C.-H.: Seat adjustment design of an intelligent robotic wheelchair based on the Stewart platform. Int. J. Adv. Robot. Syst. 10, 168 (2013)
Lobo, J., et al.: Development and evaluation of MOVit: an exercise-enabling interface for driving a powered wheelchair. IEEE Trans. Neural Syst. Rehabil. Eng. 27, 9 (2019)
Lobo-Prat, J., et al.: Evaluation of an exercise-enabling control interface for powered wheelchair users: a feasibility study with Duchenne muscular dystrophy. J. Neuroeng. Rehabil. 17, 142 (2020)
Bai, S., Virk, G.S., Sugar, T.: Wearable exoskeleton systems: design, control and applications. Institution of Engineering and Technology: London, UK (2018)
Gull, M.A., Bai, S., Bak, T.: A review on design of upper limb exoskeletons. Robotics 9, 16 (2020)
Rahman, M., Ouimet, T., Saad, M., Kenné, J., Archambault, P.: Development and control of a wearable robot for rehabilitation of elbow and shoulder joint movements. In: IEEE Conference on Industrial Electronics Society (2010)
Nogueira, L.: Comparative analysis between Gazebo and V-REP robotic simulators. In: Seminario de Cognicao Artificial-SICA, no. 5 (2014)
de Melo, M.S.P., et al.: Analysis and comparison of robotics 3D simulators. In: 21st Symposium on Virtual and Augmented Reality (SVR), pp. 242–251 (2019)
Amigo, L.: Design of an exocentric exoskeleton of the elbow joint with dynamic isocentricity adaptation. Ph.D. thesis, UPC Advisor A. Casals (2013)
Minguella, J., et al.: Comparison of production strategies and degree of postponement when incorporating additive manufacturing to product supply chains. Procedia Manuf. 13, 754–761 (2017)
Muguruza, A., Minguella, J., et al.: Development of a multi-material additive manufacturing process for electronic devices. Procedia Manuf. 13, 746–753 (2017)
Acknowledgements
This work has been developed in the frame of the project: Orthosis-Chair Hybrid Platform to make compatible Mobility, Functionality and Acceptability for application in domestic environments (POSMOFYA). Funded by Ministerio de Ciencia e Innovación, Project: PID2020-116091RB-I00. The author Joaquim Minguella-Canela is a Serra Húnter Fellow.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Casals, A., Aranda, J., Frigola, M., Minguella, J., Muñoz-Morgado, L.M., Amat, J. (2023). A Preliminary Approach to a Wheelchair with Embedded Exoskeleton Capabilities. In: Tardioli, D., Matellán, V., Heredia, G., Silva, M.F., Marques, L. (eds) ROBOT2022: Fifth Iberian Robotics Conference. ROBOT 2022. Lecture Notes in Networks and Systems, vol 590. Springer, Cham. https://doi.org/10.1007/978-3-031-21062-4_21
Download citation
DOI: https://doi.org/10.1007/978-3-031-21062-4_21
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-21061-7
Online ISBN: 978-3-031-21062-4
eBook Packages: EngineeringEngineering (R0)