Skip to main content

A Signal Conditioning Circuit with Integrated Bandgap Reference for Glucose Concentration Measurement

  • Conference paper
  • First Online:
Internet of Things. Advances in Information and Communication Technology (IFIPIoT 2023)

Abstract

The paper presents development of signal conditioning circuit with integrated potentiostat for glucose measurement. The programmable transimpedance amplifier (PTIA) offers 94% linearity of output voltage. The whole architecture consumes 2.33 mW of total power. The reference potential of 0.6 V has been used for measurements. Three electrode arrangement with Ag/AgCl as reference electrode, the Pt foil as the counter electrode and a CuO/Cu0.76CO2.25O4 (copper cobaltite) coated glassy carbon electrode (GCE) filled-in used as the working electrode. The working feasibility of proposed glucose sensing architecture is tested via an emulated circuit. The second-generation current conveyor (CCII-) is implemented with the help of two AD844 ICs. The two TAs are implemented by using IC LM13700 and I-V conversion is obtained with op-amp IC LM741 and feedback resistance. The voltage ranges from 1.19 to 1.67 V has been measured corresponding to glucose concentration ranges from 18 mg/dl to 180 mg/dl.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 84.99
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Hardcover Book
USD 109.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

References

  1. Ahmad, R., Joshi, A.M., Boolchandani, D., Varma, T.: Design of potentiostat and current mode read-out amplifier for glucose sensing. In: 2021 IEEE International Symposium on Smart Electronic Systems (iSES)(Formerly iNiS), pp. 64–69. IEEE (2021)

    Google Scholar 

  2. Ahmad, R., Joshi, A.M., Boolchandani, D., Varma, T.: Novel programmable read- out amplifier and potentiostat for glucose sensing applications. SN Computer Science 4(2), 1–11 (2023)

    Google Scholar 

  3. Ying, D., Hall, D.A.: Current sensing front-ends: a review and design guidance. IEEE Sensors Journal (2021)

    Google Scholar 

  4. Jain, P., Joshi, A.M., Mohanty, S.P.: iglu 1.1: Towards a glucose-insulin model based closed loop iomt framework for automatic insulin control of diabetic patients. In: 2020 IEEE 6th World Forum on Internet of Things (WF-IoT), pp. 1–6. IEEE (2020)

    Google Scholar 

  5. Esparza-Alfaro, F., Pennisi, S., Palumbo, G., Lopez-Martin, A.J.: Lowpower class- ab cmos voltage feedback current operational amplifier with tunable gain and bandwidth. IEEE Trans. Circuits Syst. II Express Briefs 61(8), 574–578 (2014)

    Google Scholar 

  6. Park, H., Lakshminarayana, S., Pan, C., Chung, H.J., Jung, S.: An auto adjustable transimpedance readout system for wearable healthcare devices. Electronics 11(8), 1181 (2022)

    Article  Google Scholar 

  7. Li, M., Vanhoestenberghe, A., Ghoreishizadeh, S.S.: An integrated circuit to enable electrodeposition and amperometric readout of sensing electrodes. In: 2022 IEEE 13th Latin America Symposium on Circuits and System (LASCAS), pp. 1–4. IEEE (2022)

    Google Scholar 

  8. Karandikar, N., Jung, S., Sun, Y., Chung, H.J.: Low power, low noise, compact am- perometric circuit for three-terminal glucose biosensor. Analog Integr. Circ. Sig. Process 89(2), 417–424 (2016)

    Article  Google Scholar 

  9. Shenoy, V., Jung, S., Yoon, Y., Park, Y., Kim, H., Chung, H.J.: A cmos analog correlator-based painless nonenzymatic glucose sensor readout circuit. IEEE Sens. J. 14(5), 1591–1599 (2014)

    Article  Google Scholar 

  10. Ghoreishizadeh, S.S., Taurino, I., De Micheli, G., Carrara, S., Georgiou, P.: A differential electrochemical readout asic with heterogeneous integration of bio-nano sensors for amperometric sensing. IEEE Trans. Biomed. Circuits Syst. 11(5), 1148–1159 (2017)

    Article  Google Scholar 

  11. Ahmad, R., Joshi, A.M., Boolchandani. D.: Programmable Transimpedance Amplifier with Integrated Bandgap Reference for Glucose Concentration Measurement. arXiv preprint arXiv:2305.12503 (2023)

Download references

Acknowledgment

The authors are grateful to VLSI Lab, ECE department MNIT, Jaipur and Materials Electrochemistry and Energy Storage Lab, Chemistry department, MNIT Jaipur for providing the support of EDA tools and measurement setup to conduct the experiments.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Riyaz Ahmad .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 2024 IFIP International Federation for Information Processing

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Ahmad, R., Joshi, A.M., Boolchandani, D. (2024). A Signal Conditioning Circuit with Integrated Bandgap Reference for Glucose Concentration Measurement. In: Puthal, D., Mohanty, S., Choi, BY. (eds) Internet of Things. Advances in Information and Communication Technology. IFIPIoT 2023. IFIP Advances in Information and Communication Technology, vol 684. Springer, Cham. https://doi.org/10.1007/978-3-031-45882-8_28

Download citation

  • DOI: https://doi.org/10.1007/978-3-031-45882-8_28

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-031-45881-1

  • Online ISBN: 978-3-031-45882-8

  • eBook Packages: Computer ScienceComputer Science (R0)

Publish with us

Policies and ethics