Abstract
We consider a robot moving along a horizontally or inclined located rod. The potential use of the robot is possible for moving along extended rod structures (pipes, ropes, power lines). The design includes two bushings, one of which, due to frictional forces as a result of jamming, wraps around the rod and is held on it, while the other one moves freely. When mobile robot moving along a horizontally located rod occurs design adds two servo drives and additional weights which servo drives turns, under the action of the weight and the friction force between the supporting element and the guide the bushing jams, while the other is able to move freely along it. When moving along an inclined guide there is no need for additional weights, the engagement with the supporting surface is due to friction forces and the force acting from the linear actuator. The principle of operation of the propeller is based on the effect of periodic jamming. A mathematical model has been developed. Obtained dependencies which are necessary to determine the robot design features. A 3d model of a mobile robot with propulsion devices operating on the effect of periodic jamming has been developed, on it basis has been assembled the test stand.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Sun, Y., Ni, F., Zhou, Y., Zhang, Y., Liu, Y., Liu, H.: Design of a snake robot based on modular joint. In: Proceedings of the 22nd International Conference on Climbing and Walking Robots and Support Technologies for Mobile Machines, CLAWAR 2019, pp. 53–60. IEEE, San Diego, USA (2019)
White, T., Alexander, R., Callow, G., Cooke, A., Harris, S., Sargent, J.: A mobile climbing robot for high precision manufacture and inspection of aerostructures. Int. J. Robot. Res. 24, 589–598 (2005)
Verichev, S., de Jonge L., Boomsma, W., Norman, R.: Deep Mining: From Exploration to Exploitation. Minerals of the Ocean-7 & Deep-Sea Minerals and Mining-4: abstracts of International Conference, pp. 126–138. VNIIOkeangeologia, St. Petersburg (2014)
Gradetsky, V., Knyazkov, M., Semyonov, E., Sukhanov, A.: Mobile robots’ adaptive contact devices with miniature ejectors. Mekhatronika Avtomatizatsiya Upravlenie 17(3), 172–177 (2016). (In Russian)
Briskin, E., Zhoga, V., Chernyshev, V., Maloletov, A., Kalinin, Ya., Sharonov, N.: Walking machines (elements of theory, experience of elaboration, application). In: Proceedings of the 13th International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, 2010, Emerging Trends in Mobile Robotics, pp. 769–776. Nagoya Inst. of Technology, Japan (2010)
Briskin, E., Chernyshev, V., Maloletov, A., Sharonov, N.: Comparative analysis of wheeled, tracked and walking machines. Robot. Tech. Cybernet. 1(1), 6–14 (2013)
Jatsun, S., Cherepanov, A., Rublev, S., Yatsun, A.: Vibrating mobile robot for movement along a vertical ferromagnetic wall. Nat. Tech. Sci. 6(50), 400–401 (2010)
Briskin, E., Maletov, A., Sharonov, N., Fomenko, S., Kalinin, Y., Leonard, A.: Development of rotary type movers discretely interacting with supporting surface and problems of control their movement. In: Parenti-Castelli, V., Schiehlen, W. (eds.) ROMANSY 21 – Robot Design, Dynamics and Control: Proceedings of the 21st CISM-IFToMM Symposium, CISM International Centre for Mechanical Science. Courses and Lectures, vol. 569, pp. 351–359. Springer, Switzerland (2016). https://doi.org/10.1007/978-3-319-33714-2_39
Parker, R., Bayne, K., Clinton, P.: Robotics in forestry. N. Z. J. For. 60(4), 8–14 (2016)
Shcherbina, A., Zatsepin, V., Baranov, V., Levi, A., Yurkov, S., Kokorin, A.: Platform of the vertical movement robot. Izvestiya Chelyabinsk Sci. Center Ural Branch Russian Acad. Sci. 3, 44–48 (2003)
Hradetsky, V., Rachkov, M.: Robots of Vertical Movement. Institute of Problems of Mechanics, Moscow (1997)
Golubev, Y., Koryanov, V.: A control of an insectomorphic robot when climbing to the top of a vertical angle and when moving along a ladder. J. Comput. Syst. Sci. Int. 1, 148–157 (2008)
Arykantsev, V., Matveichuk, M., Bondurko, A.: Reversible step lift of jamming type. Proc. Volgograd State Tech. Univ. 9(244), 7–10 (2020)
Richard, P.-L., et al.: LineRanger: analysis and field testing of an innovative robot for efficient assessment of bundled high-voltage powerlines. In: International Conference on Robotics and Automation, ICRA 2019, pp. 9130–9136. IEEE, Montreal, QC, Canada (2019)
Miller, R., Abbasi, F., Mohammadpour, J.: Power line robotic device for overhead line inspection and maintenance. Ind. Robot Int. J. 44(1), 75–84 (2016)
Pouliot, N., Richard, P., Montambault, S.: LineScout technology opens the way to robotic inspection and maintenance of high-voltage power lines. IEEE Power Energy Technol. Syst. J. 2(1), (2015)
Acknowledgments
The research was supported by the Russian Science Foundation grant No. 24–21-00477, https://rscf.ru/project/24-21-00477/.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2024 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Bordyugov, D., Briskin, E., Sharonov, N. (2024). Mathematical Model and Design of the Mobile Robot with Propellers Which Working on the Periodic Jamming Effect. In: Ronzhin, A., Savage, J., Meshcheryakov, R. (eds) Interactive Collaborative Robotics. ICR 2024. Lecture Notes in Computer Science(), vol 14898. Springer, Cham. https://doi.org/10.1007/978-3-031-71360-6_22
Download citation
DOI: https://doi.org/10.1007/978-3-031-71360-6_22
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-71359-0
Online ISBN: 978-3-031-71360-6
eBook Packages: Computer ScienceComputer Science (R0)