Abstract
This paper aims to demonstrate a design of low-cost, and Inertial Measurement Unit (IMU) based autopilot that is ArduPilot, and its applications. ArduPilot’s control algorithm possesses two control loops, which are used to control the navigation and the control surfaces such as actuators. Due to using PID control and being able to tune and update the PID parameters (Kp, Ki, Kd) even during the flight, ArduPilot becomes very efficient autopilot also. It’s also possible to export and analyze the data such as airspeed, air pressure, latitude-longitude-altitude, roll-pitch-yaw angles, accelerometer-gyro information, servo outputs, and moreover on Matlab®, after or during the flight. In order to go one step further, a model aircraft, which has nearly the same physical parameters as the one used for the real tests, designed on Plane Maker®, and simulated on Xplane® simulator. Using the simulator made this study easy to tune and test the whole flight parameters before real flight. This paper will lead the students who are interested in automatic control applications especially Unmanned Aerial Vehicles (UAV).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Rachman, E., Razali, R.: A Mathematical Modeling For Design and Development of Control Laws for Unmanned Aerial Vehicle (UAV). International Journal of Applied Science and Technology 1(4), 66–75 (2011)
Noura, H., Bateman, F.: Control of an Unmanned Aerial Vehicle. In: Proceeding of the 7th International Symposium on Mechatronics and its Applications (ISMA 2010), Sharjah, UAE, April 20-22, pp. 1–6 (2010)
Nonami, K., Kendoul, F., Suzuki, S., Wang, W., Nakazawa, D.: Autonomous Flying Robots: Unmanned Aerial Vehicles and Micro Aerial Vehicles. Springer, Heidelberg (2010) ISBN 978-4-431-53855-4, e-ISBN 978-4-431-53856-1
Mueller, E.R.: Hardware-in-the-loop Simulation Design for Evaluation of Unmanned Aerial Vehicle Control Systems. In: AIAA Modeling and Simulation Technologies Conference and Exhibit, Hilton Head, South Carolina, pp. 6539–6553 (2007)
Abdunabi, T.A.M., El-Gelani, M., Nasr, N.: Modeling and Autonomous Flight Simulation of a small Unmanned Aerial Vehicle. In: 13th International Conference on Aerospace Sciences & Aviation Technology, ASAT-13 (2009)
Jung, D., Tsiotras, P.: Modelling and Hardware-in-the-Loop Simulation for a Small Unmanned Aerial Vehicle. In: AIAA Infotech at Aerospace, Rohnert Park, CA, AIAA Paper 07-2768, May 7-10 (2007)
Wul, J., Wang, W., Zhang, J., Wang, B.: Research of a kind of New UAV Training Simulator Based on Equipment Simulation. In: 2011 International Conference on Electronic & Mechanical Engineering and Information Technology, pp. 4912–4815 (August 2011)
Santos, S.R.B., Oliviera, N.M.F.: Test Platform to Pitch Angle using Hardware in Loop. In: 39th ASEE/IEEE Frontiers in Education Conference, San Antonio, TX, W1J1–W1J5 (October 2009)
Jin, G.-D., Gu, L.X., Lu, L.-B.: UAV Simulator-Based Simulation of Flight Control System. In: Intelligent Systems and Applications, ISA 2009, pp. 1–4 (2009)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2013 Springer International Publishing Switzerland
About this paper
Cite this paper
Yuceol, O.E., Akbulut, A. (2013). Modeling and Simulation of a Small Unmanned Aerial Vehicle. In: Zelinka, I., Chen, G., Rössler, O., Snasel, V., Abraham, A. (eds) Nostradamus 2013: Prediction, Modeling and Analysis of Complex Systems. Advances in Intelligent Systems and Computing, vol 210. Springer, Heidelberg. https://doi.org/10.1007/978-3-319-00542-3_25
Download citation
DOI: https://doi.org/10.1007/978-3-319-00542-3_25
Publisher Name: Springer, Heidelberg
Print ISBN: 978-3-319-00541-6
Online ISBN: 978-3-319-00542-3
eBook Packages: EngineeringEngineering (R0)