Abstract
Recent research and development activities within the field of production system engineering and use focus on the increase of production system flexibility and adaptability. One common issue of those approaches is the consideration of hierarchical and modular production system architectures where the individual components of the system are equipped with certain functionalities and information. Up to now there is no common understanding about what a component can constitute, i.e. which parts of a production system can be regarded as components within the hierarchy and which functionalities and information are assigned to it. This gap will be closed within this and the subsequent two chapters.
They will at first discuss the relevant layers of components in a production system, then the types of information required to be assigned to a component on the different layers to establish a digital representation of the component, and at last the description means exploitable to represent the identified information in the different life cycle phases of a production system.
This chapter in particular will consider hierarchies of production system components and their life cycle. Based on a literature survey and practical experiences candidates for hierarchy layers and their identification criteria are named. In addition, main life cycle phases of production systems are discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Attri, R., Grover, S.: A comparison of production system life cycle models. Front. Mech. Eng. 7(3), 305–311 (2012)
Dencovski, K., Löwen, U., Holm, T., Amberg, M., Maurmaier, M., Göhner, P.: Production system’s life cycle-oriented innovation of industrial information systems. InTech, http://cdn.intechopen.com/pdfs-wm/10837.pdf (2010). Accessed 01.04.2016
Diedrich, C., Lüder, A., Hundt, L.: Bedeutung der Interoperabilität bei Entwurf und Nutzung von automatisierten Produktionssystemen. at – Automatisierungstechnik. 59(7), 426–438 (2011)
DIN 8580: Fertigungsverfahren – Begriffe, Einteilung. Beuth Verlag, Berlin (2003) (in German)
DIN 81346-1: Industrielle Systeme, Anlagen und Ausrüstung und Industrieprodukte – Strukturierungsprinzipien und Referenzkennzeichen. Beuth Verlag, Berlin (2010) (in German)
DIN 62264-1: Integration von Unternehmensführungs- und Leitsystemen. Beuth Verlag, Berlin (2013) (in German)
Dörmer, J.: Produktionsprogrammplanung bei variantenreicher Fließproduktion. Untersucht am Beispiel der Automobilendmontage. Springer Gabler, Wiesbaden (2013) (in German)
Duflou, J.R., Seliger, G., Kara, S., Umeda, Y., Ometto, A., Willems, B.: Efficiency and feasibility of product disassembly – a case-based study. CIRP Ann. Manuf. Technol. 57(2), 583–600 (2008)
Gepp, M.: Standardisierungsprogramme als Ansatz zur Steigerung der Wirtschaftlichkeit im industriellen Anlagen-Engineering. Schriftenreihe Innovative Betriebswirtschaftliche Forschung und Praxis, vol. 418. Dr. Kovac Verlag, Hamburg (2014)
Höffken, E., Schweitzer, M. (Hrsg.): Beiträge zur Betriebswirtschaft des Anlagenbaus. Schmalenbachs Zeitschrift für betriebswirtschaftliche Forschung Sonderheft. Düsseldorf, Verl.-Gruppe Handelsblatt, vol. 28 (1991)
Huber, A.: Demontageplanung und -steuerung: Planung und Steuerung industrieller Demontageprozesse mit PPS-Systemen. Dissertation, Otto-von-Guericke University Magdeburg (2001) (in German)
Kagermann, H., Wahlster, W., Helbig, J. (eds.): Recommendations for implementing the strategic initiative INDUSTRIE 4.0 – Securing the future of German manufacturing industry. Final report of the Industrie 4.0 Working Group, April 2013. http://www.acatech.de/fileadmin/user_upload/Baumstruktur_nach_Website/Acatech/root/de/Material_fuer_Sonderseiten/Industrie_4.0/Final_report__Industrie_4.0_accessible.pdf. Accessed 2016-02-01
Kiefer, J.: Mechatronikorientierte Planung automatisierter Fertigungszellen im Bereich Karosseriebau. PhD Thesis, Schriftenreihe Produktionstechnik, vol. 43, Universität des Saarlandes (2007) (in German)
Kiehl, E. (ed.): Antriebslösungen – Mechatronik für Produktion und Logistik. Springer, Berlin (2007)
Kis, T.: Planning and Scheduling in the Digital Factory, KOMSO Challenge Workshop – Math for the Digital Factory. In: Proceedings, Berlin, Germany, May 2014
Laucht, O.: Flexibilisierung der manuellen Großmontage. PhD Thesis, TU Braunschweig (1995) (in German)
Leitão, P., Karnouskos, S.: Industrial Agents: Emerging Applications of Software Agents in Industry, pp. 153–170. Elsevier, Waltham, MA (2015)
Lindemann, U.: Methodische Entwicklung technischer Produkte. Springer, Berlin (2009) (in German)
Lindemann, U., Maurer, M., Braun, T.: Structural Complexity Management – An Approach for the Field of Product Design. Springer, Berlin (2009)
Lödding, H.: Verfahren der Fertigungssteuerung. Grundlagen, Beschreibung, Konfiguration, 2. erw. Aufl. Springer (VDI), Berlin (2008) (in German)
Luczak, H., Eversheim, W., Schotten, M. (eds.): Produktionsplanung und -steuerung. Grundlagen, Gestaltung und Konzepte, 1. Aufl. Springer (VDI), Berlin (1998)
Lüder, A.: Strukturen zur verteilten Steuerung von Produktionssystemen, Habilitationsschrift. Fakultät Maschinenbau, Otto-von-Guericke Universität Magdeburg (2006)
Lüder, A., Foehr, M., Hundt, L., Hoffmann, M., Langer, Y., Frank, St.: Aggregation of engineering processes regarding the mechatronic approach. In: 16th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA 2011), Toulouse, France, Proceedings-CD, September 2011
Lunze, J.: Automatisierungstechnik – Methoden für die Überwachung und Steuerung kontinuierlicher und ereignisdiskreter Systeme. Oldenbourg Verlag, München (2008)
Meling, F.: Methodik für die Rekombination von Anlagentechnik. PhD Thesis, TU Munich (2012) (in German)
NAMUR: Automatisierungstechnik – Methoden für die Überwachung und Steuerung kontinuierlicher und ereignisdiskreter Systeme. In: Abwicklung von PLT-Projekten, NA 35, Namur-Arbeitsblatt, 24.03.2003. NAMUR Arbeitskreis 1.1 “Planungsmethodik” (2003)
Pahl, G., Beitz, W., Feldhusen, J., Grote, K.-H.: Engineering Design – A Systematic Approach. Springer, London (2007)
REFA: Ausgewählte Methoden der Planung und Steuerung. Carl Hanser Verlag, Munich (1993) (in German)
Reschke, H., Svoboda, M.: Projektmanagement. Konzeptionelle Grundlagen. Ges. für Projektmanagement, Munich (1984)
Schäffler, T., Foehr, M., Lüder, A., Supke, K.: Engineering process evaluation – evaluation of the impact of internationalisation decisions on the efficiency and quality of engineering processes. In: 22nd IEEE International Symposium on Industrial Electronics (ISIE 2013), Taipei, Taiwan, Proceedings, May 2013
Schenk, M., Wirth, S., Müller, E.: Fabrikplanung und Fabrikbetrieb – Methoden für die wandlungsfähige, vernetzte und ressourceneffiziente Fabrik, 2nd edn. Springer Vieweg, Berlin (2014)
Schmale, C.: Welthandel: Beunruhigende Signale! http://www.godmode-trader.de/artikel/welthandel-beunruhigende-signale,4412211 (2015). Accessed Mar 2016
Scholten, B.: The Road to Integration. ISA (2007)
Schuh, G., Stich, V.: Produktionsplanung und -steuerung 1 – Grundlagen der PPS, 4th edn. Springer, Berlin (2012)
Schultmann, F.: Industrielles Produktions- und Logistikmanagement. In: Haasis, H.-D., Spengler, T.S. (eds.) Produktion und Umwelt – Festschrift für Otto Rentz. Springer, Berlin (2004) (in German)
Seliger, G., Basdere, B., Keil, T.: e-Cycling platform for profitable re-use. In: IEEE International Symposium on Assembly and Task Planning, Fukuoka, Japan, Proceedings, 28–29 May 2001
Spath, D. (Hrsg.), Ganschar, O., Gerlach, S., Hämmerle, M., Krause, T., Schlund, S.: Produktionsarbeit der Zukunft – Industrie 4.0. Studie, Fraunhofer-Institut für Arbeitswirtschaft und Organisation. Fraunhofer-Verlag, Stuttgart (2013)
Urbas, L., Krause, A.: Process Control Systems Engineering. Oldenbourg Industrieverlag GmbH, Munich (2012)
VDI 2860: Montage- und Handhabungstechnik – Handhabungsfunktionen, Handhabungseinrichtungen; Begriffe, Definitionen, Symbole. Beuth Verlag, Berlin (1990) (in German)
VDI 2221: Methodik zum Entwickeln und Konstruieren technischer Systeme und Produkte. Beuth Verlag, Berlin (1993)
VDI 2243: Recycling-oriented Product Development. Beuth Verlag, Berlin (2002)
VDI 2884: Purchase, Operating and Maintenance of Production Equipment using Life Cycle Costing (LCC). Beuth Verlag, Berlin (2005)
VDI 2206: Design methodology for mechatronic systems. Beuth Verlag, Berlin (2006)
VDI 4499: Digital Factory. Beuth Verlag, Berlin (2011)
VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik – Fachausschuss 7.21 “Industrie 4.0”, “Status Report: Reference Architecture Model Industrie 4.0 (RAMI4.0), July 2015. http://www.zvei.org/Publikationen/GMA-Status-Report-RAMI-40-July-2015.pdf
VDI/VDE: Industrie 4.0 –Wertschöpfungsketten. VDI/VDE Gesellschaft Mess- und Automatisierungstechnik, Statusreport, April 2014
VDIa 3695: Engineering of industrial Plants, Evaluation and Optimization, Part 1. Beuth Verlag, Berlin (2010)
VDMA 34160: Prognosemodell für die Lebenszykluskosten von Maschinen und Anlagen. Beuth Verlag, Berlin (2013)
VDMA Arbeitsgemeinschaft Großanlagenbau: Lagebericht 2014/2015: Weltweite Krisen meistern – lokale Chancen nutzen, Beiträge zum Industrieanlagenbau. Technical Report, VDMA Arbeitsgemeinschaft Großanlagenbau (2015) (in German)
Vogel-Heuser, B., Bauernhansl, T., ten Hompel M. (eds.): Handbuch Industrie 4.0 – Produktion, Automatisierung und Logistik. Springer, Berlin (2015) (in German)
Vogel-Heuser, B., Diedrich, C., Broy, M.: Anforderungen an CPS aus Sicht der Automatisierungstechnik. Automatisierungstechnik 61(10), 669–676 (2013)
Weber, K.H.: Dokumentation verfahrenstechnischer Anlagen. Springer, Berlin (2008) (in German)
Wiendahl, H.-P., ElMaraghy, H.A., Nyhuis, P., Zäh, M.F., Wiendahl, H.-H., Duffie, N.A., Brieke, M.: Changeable manufacturing – classification, design and operation. Ann. CIRP. 56(2), 783–809 (2007)
Wiendahl, H.-P., Reichardt, J., Nyhuis, P.: Handbook Factory Planning and Design. Springer, Berlin (2015)
Wiktorsson, M.: Consideration of legacy structures enabling a double helix development of production systems and products. In: Henriques, E., Pecas, P., Silva, A. (eds.) Technology and Manufacturing Process Selection, Springer Series in Advanced Manufacturing, pp. 21–32. Springer, London (2013)
Yang, C., Vyatkin, V., Pang, C.: Model-driven development of control software for distributed automation. IEEE Trans. Syst. Man Cybern. Syst. 44(3), 292–305 (2014)
ZVEI - Fachverband Automation (Hrsg.): Manufacturing Execution Systems (MES). Branchenspezifische Anforderungen und herstellerneutrale Beschreibung von Lösungen. ZVEI, Frankfurt (2010)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Lüder, A., Schmidt, N., Hell, K., Röpke, H., Zawisza, J. (2017). Fundamentals of Artifact Reuse in CPPS. In: Biffl, S., Lüder, A., Gerhard, D. (eds) Multi-Disciplinary Engineering for Cyber-Physical Production Systems. Springer, Cham. https://doi.org/10.1007/978-3-319-56345-9_5
Download citation
DOI: https://doi.org/10.1007/978-3-319-56345-9_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-56344-2
Online ISBN: 978-3-319-56345-9
eBook Packages: EngineeringEngineering (R0)