Abstract
A new developed tool for PID learning is described on this work. The main contribution is the possibility to assist non-experimented users on the PID tuning task. For its implementation, knowledge engineering was used by the conceptual model creation and its next formalization on the described tool. Very good results have been achieved in general terms when it was validated with users without expertise on the control field. Both aims were achieved, the right learning of the traditional PID tuning by empirical methods and the assistance during tuning over systems.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Åström, K.J., Wittenmark, B.: Computer-controlled systems: theory and design (2013)
Guzman, J.L., Astrom, K.J., Dormido, S., Hagglund, T., Berenguel, M., Piguet, Y.: Interactive learning modules for PID control [Lecture Notes]. IEEE Control Syst. 28, 118–134 (2008)
Alaiz Moretón, H., Calvo Rolle, J.L., García, I., Alonso Alvarez, A.: Formalization and practical implementation of a conceptual model for PID controller tuning. Asian J. Control. 13, 773–784 (2011)
Machon-Gonzalez, I., Lopez-Garcia, H., Calvo-Rolle, J.L.: A hybrid batch SOM-NG algorithm. In: The 2010 International Joint Conference on Neural Networks (IJCNN), pp. 1–5 (2010)
Calvo-Rolle, J.L., Quintian-Pardo, H., Corchado, E., Meizoso-López, M.C., Ferreiro García, R.: Simplified method based on an intelligent model to obtain the extinction angle of the current for a single-phase half wave controlled rectifier with resistive and inductive load. J. Appl. Log. 13, 37–47 (2015)
Crespo-Ramos, M.J., Machón-González, I., López-García, H., Calvo-Rolle, J.L.: Detection of locally relevant variables using SOM–NG algorithm. Eng. Appl. Artif. Intell. 26, 1992–2000 (2013)
Jove, E., Aláiz-Moretón, H., Casteleiro-Roca, J.L., Corchado, E., Calvo-Rolle, J.L.: Modeling of bicomponent mixing system used in the manufacture of wind generator blades. In: International Conference on Intelligent Data Engineering and Automated Learning, pp. 275–285 (2014)
Casteleiro-Roca, J.L., Calvo-Rolle, J.L., Meizoso-López, M.C., Piñón-Pazos, A.P., Rodríguez-Gómez, B.A.: New approach for the QCM sensors characterization. Sens. Actuators A Phys. 207, 1–9 (2014)
Guzmán, J.L., Hägglund, T., Åström, K.J., Dormido, S., Berenguel, M., Piguet, Y.: Understanding PID design through interactive tools. In: IFAC Proceedings, vol. 47, pp. 12243–12248 (2014)
Calvo-Rolle, J.L., Alonso-Alvarez, A., Ferreiro-Garcia, R.: Using knowledge enginering in a PID regulator in non linear process control. Ing. Quim. 32, 21–28 (2007)
Casteleiro-Roca, J.L., Calvo-Rolle, J.L., Meizoso-López, M.C., Piñón-Pazos, A.J., Rodríguez-Gómez, B.A.: Bio-inspired model of ground temperature behavior on the horizontal geothermal exchanger of an installation based on a heat pump. Neurocomputing 150, 90–98 (2015)
Ferreiro García, R., Calvo Rolle, J.L., Romero Gomez, M., DeMiguel Catoira, A.: Expert condition monitoring on hydrostatic self-levitating bearings. Expert Syst. Appl. 40, 2975–2984 (2013)
Casteleiro-Roca, J.L., Pérez, J.A.M., Piñón-Pazos, A.J., Calvo-Rolle, J.L., Corchado, E.: Modeling the electromyogram (EMG) of patients undergoing anesthesia during surgery. In: 10th International Conference on Soft Computing Models in Industrial and Environmental Applications, pp. 273–283 (2015)
Casteleiro-Roca, J.-L., Calvo-Rolle, J.L., Méndez Pérez, J.A., Roqueñí Gutiérrez, N., de Cos Juez, F.J.: Hybrid intelligent system to perform fault detection on bis sensor during surgeries. Sensors 17, 179 (2017)
Quintián, H., Calvo-Rolle, J.L., Corchado, E.: A hybrid regression system based on local models for solar energy prediction. Informatica 25, 265–282 (2014)
Quintián-Pardo, H., Calvo-Rolle, J.L., Fontenla-Romero, O.: Application of a low cost commercial robot in task of tracking of objects. DYNA 175, 24–33 (2012)
Karl, J.Å., Hägglund, T.: PID controllers: theory, design and tuning (1995)
Guzmán, J.L., García, P., Hägglund, T., Dormido, S., Albertos, P., Berenguel, M.: Interactive tool for analysis of time-delay systems with dead-time compensators. Control Eng. Pract. 16, 824–835 (2008)
Guzman, J.L., Dormido, S., Berenguel, M.: Interactivity in education: an experience in the automatic control field. Comput. Appl. Eng. Educ. 21, 360–371 (2013)
Calvo-Rolle, J.L., Alaiz-Moretón, H., Alfonso-Cendón, J., Alonso-Álvarez, Á., Ferreiro-García, R.: Development of a conceptual model for a knowledge-based system for the design of closed-loop PID controllers. In: International Conference on Intelligent Data Engineering and Automated Learning, pp. 58–65 (2009)
Calvo-Rolle, J.L.C., Ferreiro-García, R., López García, H., González, I.M.: Developed an expert system of an empirical method to choose correct expressions for PID controllers tuning in open loop. In: Industrial Electronics, 2009. IECON’09. 35th Annual Conference of IEEE, pp. 2044–2049 (2009)
Calvo-Rolle, J.L., Machón-González, I., López-García, H.: Neuro-Robust controller for non-linear systems. DYNA 86, 308–317 (2011)
Calvo-Rolle, J., Corchado, E., Quintian-Pardo, H., García, R., Román, J., Hernández, P.: A novel hybrid intelligent classifier to obtain the controller tuning parameters for temperature control. In: Corchado, E., Snášel, V., Abraham, A., Woźniak, M., Graña, M., Cho, S.B. (eds.) Hybrid Artificial Intelligent Systems, pp. 677–689. Springer, Heidelberg (2012)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Jove, E., Alaiz-Moretón, H., García-Rodríguez, I., Benavides-Cuellar, C., Casteleiro-Roca, J.L., Calvo-Rolle, J.L. (2018). PID-ITS: An Intelligent Tutoring System for PID Tuning Learning Process. In: Pérez García, H., Alfonso-Cendón, J., Sánchez González, L., Quintián, H., Corchado, E. (eds) International Joint Conference SOCO’17-CISIS’17-ICEUTE’17 León, Spain, September 6–8, 2017, Proceeding. SOCO ICEUTE CISIS 2017 2017 2017. Advances in Intelligent Systems and Computing, vol 649. Springer, Cham. https://doi.org/10.1007/978-3-319-67180-2_71
Download citation
DOI: https://doi.org/10.1007/978-3-319-67180-2_71
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-67179-6
Online ISBN: 978-3-319-67180-2
eBook Packages: EngineeringEngineering (R0)