Abstract
This chapter presents a new line of research that addresses the treatment of data acquired through different sensors to capture reality in order to obtain useful information that can be applied to the generation of knowledge in the field of conservation and restoration of Cultural Heritage. This technology is expected to be used to solve impact problems in this field. The ultimate goal is the generation of work strategies to enhance the quality of the service provided to visitors and, consequently, their satisfaction. The multidisciplinary nature of the tasks to be tackled requires the joint work of specialists from such diverse areas as Computer Vision and Archaeology.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Levoy, M., Pulli, K., Curless, B., Rusinkiewicz, S., Koller, D., Pereira, L., Ginzton, M., Anderson, S., Davis, J., Ginsberg, J., Shade, J., Fulk, D.: The digital Michelangelo project: 3D scanning of large statues. In: Proceedings of the 27th Annual Conference on Computer Graphics and Interactive Techniques, pp. 131–144 (2000)
Koller, D., Trimble, J., Najbjerg, T., Gelfand, N., Levoy, M.: Fragments of the city: Stanford’s digital forma urbis romae project. J. Roman Archaeol. Suppl. 61, 237–252 (2006)
Siotto, E., Dellepiane, M., Callieri, M., Scopigno, R., Gratziu, C., Moscato, A., Burgio, L., Legnaioli, S., Lorenzetti, G., Palleschi, V.: A multidisciplinary approach for the study and the virtual reconstruction of the ancient polychromy of Roman sarcophagi. J. Cult. Heritage 16, 307–314 (2015)
Potenziani, M., Callieri, M., Dellepiane, M., Corsini, M., Ponchio, F., Scopigno, R.: 3DHOP: 3D Heritage online presenter. Comput. Graph. 52, 129–141 (2015)
Scopigno, R., Cignoni, P., Pietroni, N., Callieri, M., Dellepiane, M.: Digital fabrication techniques for Cultural Heritage: a survey. Comput. Graph. Forum 36(1), 6–21 (2016)
Lerma, J.L., Cabrelles, M., Navarro, S.: Fusion of range-based data and image-based datasets for efficient documentation of Cultural Heritage objects and sites. In: The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, XL-5/W7, pp. 277–281 (2015)
Domingo, I., Villaverde, V., López-Montalvo, E., Lerma, J.L., Cabrelles, M.: Latest developments in rock art recording: Towards an integral documentation of Levantine rock art sites combining 2D and 3D recording techniques. J. Archaeol. Sci. 40(4), 1879–1889 (2012)
Adán, A., Salamanca, S., Merchán, P.: A hybrid human-computer approach for recovering incomplete Cultural Heritage pieces. Comput. Graph. 36(1), 1–15 (2012)
Merchán, P., Salamanca, S., Adán, A.: Restitution of sculptural groups using 3D scanners. Sensors (MDPI) 11(9), 8497–8518 (2011)
Merchán, P., Adán, A., Salamanca, S., Domínguez, V., Chacón, R.: Geometric and colour data fusion for outdoor 3D models. Sensors (MDPI) 12(6), 6893–6919 (2012)
Grinzato, E.: IR thermography applied to the Cultural Heritage conservation. In: 18th World Conference on Nondestructive Testing (2012)
Mercuri, F., Orazi, N., Zammit, U., Paoloni, S., Marinelli, M., Valentini, P.P.: Thermographic analysis of Cultural Heritage: recent applications and perspectives. E-preservation Sci. 9, 84–89 (2012)
Sidiropoulou-Velidou, D., Georgopoulos, A., Lerma, J.L.: Exploitation of thermal imagery for the detection of pathologies in monuments. In: Ioannides, M., Fritsch, D., Leissner, J., Davies, R., Remondino, F., Caffo, R. (eds.) EuroMed 2012. LNCS, vol. 7616, pp. 97–108. Springer, Heidelberg (2012). https://doi.org/10.1007/978-3-642-34234-9_10
Alba, M.I., Barazzetti, L., Scaioni, M., Rosina, E., Previtali, M.: Mapping infrared data on terrestrial laser scanning 3D models of buildings. Remote Sens. 3, 1847–1870 (2011)
Borrmann, D., Nüchter, A., Dakulovic, M., Maurovic, I., Petrovic, I., Osmankovic, D., Velagic, J.: The project thermalmapper – thermal 3D mapping of indoor environments for saving energy. In: The 10th International IFAC Symposium on Robot Control (SYROCO 2012), Dubrovnik, Croatia (2012)
Borrmann, D., Elseberg, J., Nüchter, A.: Thermal 3D mapping of building façades. In: Lee, S., Cho, H., Yoon, K.J., Lee, J. (eds.) Intelligent Autonomous Systems 12. Advances in Intelligent Systems and Computing, vol. 193, pp. 173–182. Springer, Heidelberg (2013)
Lagüela, S., Martínez, J., Armesto, J., Arias, P.: Energy efficiency studies through 3D laser scanning and thermographic technologies. Energy Build. 43, 1216–1221 (2011)
Cabrelles, M., Galcerá, S., Navarro, S., Lerma, J.L., Akasheh, T.: Haddad, N.: Integration of 3D laser scanning, photogrammetry and thermography to record architectural monuments. In: 22nd CIPA Symposium (2009)
Fernandes, L., Nogales, T.: Programas decorativos teatrales de Lusitania: teatro romano de Olisipo. In: Escultura romana en Hispania VIII (in press)
Velázquez, A.: Placa con inscripción sobre la restauración del circo romano de Mérida. In: Alvarez, J.M., Carvalho, A., Fabiao, C. (eds.) Lusitania Romana. Origen de dos pueblos, pp. 309–310 (2015)
Università di Firenze, with Paolo Liverani in the lead, or Ny Carlsberg Glyptotek with its project Tracking Colour (http://www.trackingcolour.com/) among others
Poksińska, M., Cupa, A., Socha-Bystroń, S.: Thermography in the investigation of gilding on historical wall paintings. In: 9th International Conference on Quantitative InfraRed Thermography, Krakow – Poland (2008)
Donia, G., Orazi, N., Mercuri, F., Cicero, C., Zammit, U., Paoloni, S., Marinelli, M.: Thermographic study of the illuminations of a 15th century antiphonary. J. Cult. Heritage 15(6), 692–697 (2014)
Vide bibliography of G. Borghini, P. Pensabene, P. Lapuente, J. Beltrán, etc.
Volk, R., Stengel, J., Schultmann, F.: Building Information Modeling (BIM) for existing buildings—Literature review and future needs. Autom. Constr. 38, 109–127 (2014)
Merchán, P., Rivera, B., Salamanca, S., Merchán, M.J.: From BIM to HBIM: current state and perspectives. In: Cultural Heritage: Perspectives, Challenges and Future Directions. Nova Science Publishers, New York (2017)
Adan, A., Huber, D.: Reconstruction of wall surfaces under occlusion and clutter in 3D indoor environments. Robotics Institute, Carnegie Mellon University, Pittsburgh, PA CMU-RI-TR-10-12 (2010)
Ham, Y., Golparvar-Fard, M.: An automated vision-based method for rapid 3D energy performance modeling of existing buildings using thermal and digital imagery. Adv. Eng. Inform. 27, 395–409 (2013)
Rangel, J., Soldan, S., Kroll, A.: 3D Thermal imaging: fusion of thermography and depth cameras. In: Quantitative InfraRed Thermography (2014)
Borrmann, D., Nüchter, A., Ðakulović, M., Maurovic, I., Petrović, I., Osmankovic, D., Velagić, J.: A mobile robot based system for fully automated thermal 3D mapping. Adv. Eng. Inform. 28(4), 425–440 (2014)
Mader, D., Blaskow, R., Westfeld, P., Weller, C.: Potential of UAV-Based laser scanner and multispectral camera data in building inspection. In: International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences - ISPRS Archives, pp. 1135–1142 (2016)
Wang, C., Cho, Y.K., Gai, M.: As-Is 3D thermal modeling for existing building envelopes using a hybrid LIDAR system. J. Comput. Civil Eng. 27, 645–656 (2013)
González-Aguilera, D., Rodriguez-Gonzalvez, P., Armesto, J., Lagüela, S.: Novel approach to 3D thermography and energy efficiency evaluation. Energy Build. 54, 436–443 (2012)
López-Fernández, L., Lagüela, S., González-Aguilera, D., Lorenzo, H.: Thermographic and mobile indoor mapping for the computation of energy losses in buildings. Indoor Built Environ. 26(6), 1–14 (2016)
Heikkila, J., Silven, O.: A four-step camera calibration procedure with implicit image correction. In: Proceedings of the IEEE Computer Society Conference on Computer Vision and Pattern Recognition, pp. 1106–1112 (1997)
Demantké, J., Mallet, C., David, N., Vallet, B.: Dimensionality based scale selection in 3D LIDAR point clouds. In: ISPRS - International Archives of the Photogrammetry Remote Sensing and Spatial Information Sciences, vol. XXXVIII-5/, pp. 97–102 (2012)
Nurunnabi, A., Belton, D., West, G.: Robust segmentation for large volumes of laser scanning three-dimensional point cloud data. IEEE Trans. Geosci. Remote Sens. 54, 4790–4805 (2016)
Bassier, M., Vergauwen, M., Van Genechten, B.: Automated classification of Heritage Buildings for as-built BIM using machine learning techniques. In: SPRS Annals of the Photogrammetry, Remote Sensing and Spatial Information Sciences, vol. IV-2/W2 (2017)
Acknowledgments
This work has been supported by the projects IB16162 from Junta de Extremadura and Fondo Europeo de Desarrollo Regional “Una manera de hacer Europa” and DPI2016-76380-R, from the Spanish Ministry of Economy, Industry and Competitiveness, and by the FEDER Funds (Programa Operativo FEDER de Extremadura 2014-2020) through the grant “Ayuda a Grupos de Investigación” (ref. GR15178) of Junta de Extremadura.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this paper
Cite this paper
Merchán, P., Merchán, M.J., Salamanca, S., Adán, A. (2018). Application of Multisensory Technology for Resolution of Problems in the Field of Research and Preservation of Cultural Heritage. In: Ioannides, M., Martins, J., Žarnić, R., Lim, V. (eds) Advances in Digital Cultural Heritage. Lecture Notes in Computer Science(), vol 10754. Springer, Cham. https://doi.org/10.1007/978-3-319-75789-6_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-75789-6_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-75788-9
Online ISBN: 978-3-319-75789-6
eBook Packages: Computer ScienceComputer Science (R0)