Abstract
The process of printing and inspecting solder paste deposits in Printed Circuit Boards (PCB) involves a very large number of variables (more than 30000 can be found in 3D inspection of high density PCBs). State of the art Surface Mount Technology (SMT) production lines rely on 100% inspection of all paste deposits for each PCB produced. Specification limits for Area, Height, Volume, Offset X and Offset Y have been defined based on detailed and consolidated studies. PCBs with paste deposits failing the defined criteria, are proposed to be rejected.
The study of the variation of the rejected fraction over time, has shown that the process is not always stable and it would benefit from a statistical process control approach.
Statistical process control for 30000 variables is not feasible with a univariate approach. On one side, it is not possible to pay attention to such a high number of Shewhart control charts. On the other side, the very rich information contained in the evolution of the correlation structure would be lost in the case of a univariate approach.
The use of Multivariate Statistical Process Control based on Principal Component Analysis (PCA-MSPC) provides an efficient solution for this problem.
The examples discussed in this paper show that PCA-MSPC in solder paste printing is able to detect and diagnose disturbances in the underlying factors which govern the variation of the process. The early identification of these disturbances can be used to trigger corrective actions before disturbances start to cause defects. The immediate confirmation of effectiveness of the corrective action is a characteristic offered by this method and can be observed in all the examples presented.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Esbensen, K.H., Guyot, D., Westad, F., Houmoller, L.P.: Multivariate data analysis: in practice: an introduction to multivariate data analysis and experimental design. In: Multivariate Data Analysis (2002)
Ferrer, A.: Latent structures-based multivariate statistical process control: a paradigm shift. Qual. Eng. 26(1), 72–91 (2014)
Jackson, J.E.: A User’s Guide to Principal Components. Wiley, New York (1991)
Jolliffe, I.T.: Principal Component Analysis, 2nd edn. Springer, New York (2002). https://doi.org/10.1007/b98835
MacGregor, J.F., Kourti, T.: Process analysis, monitoring and diagnosis, using multivariate projection methods. Chemom. Intell. Lab. Syst. 28(1), 3–21 (1995)
Martins, C.: Controlo Estatístico Multivariado do Processo. Universidade do Minho (2016). in Portuguese
Montgomery, D.C.: Introduction to Statistical Quality Control, 6th edn. Wiley, New York (2009)
Nomikos, P., MacGregor, J.: Statistical Process Control of Batch Processes (1995)
Reis, M., Delgado, P.: A large-scale statistical process control approach for the monitoring of electronic devices assemblage. Comput. Chem. Eng. 39, 163–169 (2012)
Reis, M., Gins, G.: Industrial process monitoring in the Big Data/Industry 4.0 era: from detection, to diagnosis, to prognosis. Processes 5(3), 35 (2017)
Shewhart, W.A.: Economic Control of Quality of Manufactured Product. D. Van Nostrand Company, Inc., New York (1931). (Volume Republished in 1980 as a 50th Anniversary Commemorative Reissue by ASQC Quality Press)
Tracy, N.D., Young, J.C., Mason, R.L.: Multivariate control charts for individual observations. J. Qual. Technol. 24(2), 88–95 (1992)
Wold, S., Geladi, P., Esbensen, K., Ohman, J.: Multi-way principal components and PLS analysis. J. Chemom. 1, 41–56 (1987)
Acknowledgements
This work has been supported by: European Structural and Investment Funds in the FEDER component, through the Operational Competitiveness and Internationalization Programme (COMPETE 2020) [Project nº 002814; Funding Reference: POCI-01-0247-FEDER-002814], COMPETE: POCI-01-0145-FEDER-007043 and FCT- (Fundação para a Ciência e Tecnologia) within the Project Scope: UID/CEC/00319/2013.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this paper
Cite this paper
Delgado, P. et al. (2018). Benefits of Multivariate Statistical Process Control Based on Principal Component Analysis in Solder Paste Printing Process Where 100% Automatic Inspection Is Already Installed. In: Gervasi, O., et al. Computational Science and Its Applications – ICCSA 2018. ICCSA 2018. Lecture Notes in Computer Science(), vol 10961. Springer, Cham. https://doi.org/10.1007/978-3-319-95165-2_25
Download citation
DOI: https://doi.org/10.1007/978-3-319-95165-2_25
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-95164-5
Online ISBN: 978-3-319-95165-2
eBook Packages: Computer ScienceComputer Science (R0)