Summary
A benchmarking facility for snake robot locomotion is presented, including the design of a snake-like robot extended with a sensor setup combining three-dimensional vision and an array of force sensors to register friction and impulse forces. A surrounding, modular environment consisting of a reconfigurable obstacle course and a ceiling mounted camera system is also presented. This enables research into adaptive obstacle-based and non-obstacle-based movement patterns for robotic snakes. Experimental results show possibilities for detailed data analysis of snake robot locomotion. Thus, the facility may be a common reference on which to experiment and evaluate future ideas.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Burdick, J.W., Radford, J., Chirikjian, G.S.: A ‘sidewinding’ locomotion gait for hyper-redundant robots. In: Proc. IEEE Int. Conf. Robotics and Automation, May 1993, pp. 101–106 (1993)
Einramhof, P., Olufs, S., Vincze, M.: Experimental evaluation of state of the art 3d-sensors for mobile robot navigation. In: 31st AAPR/OAGM Workshop (2007)
Granosik, G., Borenstein, J.: Integrated joint actuator for serpentine robots. IEEE-ASME Trans. Mech. 10(5), 473–481 (2005)
Hirose, S.: Biologically Inspired Robots: Snake-Like Locomotors and Manipulators. Oxford University Press, Oxford (1993)
Hirose, S., Mori, M.: Biologically inspired snake-like robots. In: Proc. IEEE Int. Conf. Robotics and Biomimetics (2004)
Kadous, M., Sheh, R., Sammut, C.: Caster: a robot for urban search and rescue. In: Proceedings of the 2005 Australasian conference on robotics and automation, ARAA, pp. 1–10 (2005)
Kahlmann, T., Ingensand, H.: Calibration of the fast range imaging camera swissranger for use in the surveillance of the environment. In: Kamerman, G.W., Willetts, D.V., Steinvall, O.K. (eds.) Electro-Optical Remote Sensing II, SPIE, vol. 6396, p. 639605 (2006)
Kahlmann, T., Remondino, F., Ingensand, H.: Calibration for increased accuracy of the range imaging camera swissranger. In: Proceedings of the ISPRS Commision V Symposium Image Engineering and Vision Metrology, vol. XXXVI, pp. 136–141 (2006)
Kamegawa, T., Yarnasaki, T., Igarashi, H., Matsuno, F.: Development of the snake-like rescue robot ‘Kohga’. In: Proc. IEEE Int. Conf. Robotics and Automation, vol. 5, pp. 5081–5086 (2004)
Kavli, T., Kirkhus, T., Thielemann, J.T., Jagielski, B.: Modelling and compensating measurement errors caused by scattering in time-of-flight cameras (to be published, 2008)
Liljebäck, P., Stavdahl, Ø., Beitnes, A.: SnakeFighter. development of a water hydraulic fire fighting snake robot. In: Proc. IEEE Int. Conf. Control, Automation, Robotics, and Vision (December 2006)
Liljebäck, P., Stavdahl, Ø., Pettersen, K.Y.: Modular pneumatic snake robot: 3D modelling, implementation and control. In: Proc. 16th IFAC World Congress (July 2005)
Mure-Dubois, J., Hügli, H.: Real-time scattering compensation for time-of-flight camera. In: Proc. Of the ICVS (2007)
Nilsson, M.: Serpentine locomotion on surfaces with uniform friction. In: Proc. IEEE/RSJ Int. Conf. Intelligent Robots and Systems, pp. 1751–1755 (2004)
Ohno, H., Hirose, S.: Design of slim slime robot and its gait of locomotion. In: Proc. IEEE/RSJ Int. Conf. Intelligent Robots and Systems, vol. 2, pp. 707–715 (2001)
Paljug, E., Ohm, T., Hayati, S.: The jpl serpentine robot: a 12-dof system for inspection. In: IEEE Int. Conf. on Robotics and Automation, vol. 3, pp. 3143–3148 (1995)
Tanev, I.: Genetic programming incorporating biased mutation for evolution and adaptation of snakebot. Genetic Programming and Evolvable Machines 8(1), 39–59 (2007)
Togawa, K., Mori, M., Hirose, S.: Study on three-dimensional active cord mechanism: Development of ACM-R2. In: Proc. IEEE/RSJ Int. Conf. Intelligent Robots and Systems, vol. 3, pp. 2242–2247 (2000)
Transeth, A.A., Liljebäck, P., Pettersen, K.Y.: Snake robot obstacle aided locomotion: An experimental validation of a non-smooth modeling approach. In: Proc. IEEE/RSJ Int. Conf. Intelligent Robots and Systems (to appear, 2007)
Worst, R., Linnemann, R.: Construction and operation of a snake-like robot. In: Proc. IEEE Int. Joint Symp. Intelligence and Systems, Rockville, MD, USA, November 1996, pp. 164–169 (1996)
Hiroya Yamada, S., Chigisaki, M., Mori, K., Takita, K., Ogami, K., Hirose, S.: Development of amphibious snake-like robot ACM-R5. In: Proc. 36th Int. Symp. Robotics (2005)
Ye, C., Ma, S., Li, B., Liu, H., Wang, H.: Development of a 3d snake-like robot: Perambulator-ii. In: Int. Conf. on Mechatronics and Automation, ICMA 2007, pp. 117–122 (2007)
Author information
Authors and Affiliations
Editor information
Rights and permissions
Copyright information
© 2008 Springer-Verlag Berlin Heidelberg
About this chapter
Cite this chapter
Fjerdingen, S.A., Mathiassen, J.R., Schumann-Olsen, H., Kyrkjebø, E. (2008). Adaptive Snake Robot Locomotion: A Benchmarking Facility for Experiments. In: Bruyninckx, H., Přeučil, L., Kulich, M. (eds) European Robotics Symposium 2008. Springer Tracts in Advanced Robotics, vol 44. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-78317-6_2
Download citation
DOI: https://doi.org/10.1007/978-3-540-78317-6_2
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-78315-2
Online ISBN: 978-3-540-78317-6
eBook Packages: EngineeringEngineering (R0)