Abstract
Philosophy of flexible manufacturing cell dedicated for small batch production present production system that manipulates with workpieces and produce from semi products individual parts for concrete final products. Base of the complex automatic production is automation of technological process control, automatic transport, manipulation, feeding, workpiece and tool exchange. Industrial production develops, the new generation production systems – intelligent production systems. Development of new generation production machines and systems demand that they are equipped by adequate fixture devices. These fixture devices are developed with machine together, to don’t decrease their production facilities and their time and performance utilizations. Efficiency of fixture device in automatized production systems underlie using efficiency of entire production systems.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Danišová, N., Pastierovič, M., Fidler, B.: Nové generácie upínačov vo výrobnom procese (New generation of clamping fixtures in production). In: Vedecké práce MtF STU v Bratislave so sídlom v Trnave, pp. 21–26 (2006); ISSN 1336-1589. - Č. 21
Danišová, N., Zvolenský, R.: Automated flexible manufacturing systems. In: KOD 2006: Zbornik radova / nadát. Simpozijum sa medunarodnim učešcem. 4. Konstruisanje, oblikovanje i dizajn. Palic, 30-31 May 2006, pp. 253–256. Fakultet tehničkih nauka, Novi Sad (2006)
DrstvenšEK, I., Pahole, I., KovačIč, M., Balič, J.: Intelligent interface in a flexible production environment. J. mater. process. technol. [Print ed.], May 15, 2005, vol. 164-165, pp. 1309–1316 [COBISS.SI-ID 9462806] (2005), http://dx.doi.org/10.1016/j.jmatprotec.2005.02.074
Ficko, M., Drstvenšek, I., Brezočnik, M.: Design of layout of flexible manufacturing system by genetic algorithms. V: MicroCAD, Section J, Production engineering and manufacturing systems, pp. 57–60. University of Miskolc, Innovation and Technology Transfer Centre, Miskolc (2004) [COBISS.SI-ID 8632854]
Hrušková, E., Matúšová, M.: Fixture model creation in software Catia V5R15. - 1/3193/06, 1/3164/06. In: RaDMI 2006: Proceedings on CD-ROM / nadát. International Conference, Budva, Montenegro, September 13-17, 2006, pp. 1–4. High Technical Mechanical School of Trstenik, Trstenik (2006)
Košál, P., Matúšová, M., Velíšek, K.: Modeling of clamping fixtures. Academic Journal of Manufacturing Engineering 5(2), 65–68 (2007)
Matúšová, M., Hrušková, E.: Database of fixture mechanisms. In: RaDMI 2007: Proceedings on CD-ROM of 7th International Conference Research and Development in Mechanical Industy - RaDMI 2007, Belgrade, Serbia, September 16-20, 2007, pp. 613–617. High Technical Mechanical School of Trstenik, Trstenik (2007)
Matúšová, M., Javorová, A.: Analyse der Spannvorrichtungen durch Algorithmus. Analýza upínacích prípravkov pomocou algoritmu. In: Materials Science and Technology [online] (2005); ISSN 1335-9053. - Roč. 5, č. 1 [cit. 2005-03-29]
Matúšová, M., Katalinic, B., Hrušková, E.: Determination of cutting forces direction and point of acting. In: Annals of DAAAM for 2006 and Proceedings / nadát. International DAAAM Symposium. 17th. Intelligent Manufacturing and Automation: Focus on Mechatronics and Robotics, Viena, Austria, 8-11th November 2006, pp. 241–242. DAAAM International Vienna, Viedeň (2006)
Velíšek, K., Danišová, N., Košál, P.: Exploitation of intelligence in roboted assembly. In: Annals of MTeM for 2007 & Proceedings of the 8th International Conference Modern Technologies in Manufacturing, 4th-5th October 2007, pp. 453–456. Technical University of Cluj-Napoca, Cluj-Napoca (2007)
Velíšek, K., Javorová, A., Zvolenský, R., Danišová, N., Košt’ál, P.: Multifunctional manufacturing and assembly system. In: Development of Mechanical Engineering as a Tool for Enterprise Logistics Progress: Science Report Project CII-PL-0033-01-0506, pp. 135–158. University of Technology, Poznaň (2006)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Velíšek, K., Košt’ál, P., Zvolenský, R. (2008). Clamping Fixtures for Intelligent Cell Manufacturing. In: Xiong, C., Liu, H., Huang, Y., Xiong, Y. (eds) Intelligent Robotics and Applications. ICIRA 2008. Lecture Notes in Computer Science(), vol 5315. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-88518-4_103
Download citation
DOI: https://doi.org/10.1007/978-3-540-88518-4_103
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-88516-0
Online ISBN: 978-3-540-88518-4
eBook Packages: Computer ScienceComputer Science (R0)