Abstract
The majority of actual production are small or middle batch character. Thence, using of flexible production systems has lot of advantages. Their new generation fixture devices different from classical fixtures not only by design but also by its properties. One from the ways of supplementary time reducing is an suitable fixture using and supplementary operations automation. Using of proper fixture will increase the production quality, the productivity and reduce the production costs. The fixture provide clamping of workpiece on machine desk, so as the workpiece have the right position toward tool. This position must be retain in machining time too. The fixture design are dependent on the batches of production. In small batches we use the fixtures designed from modular system and in large batches we can use the dedicated fixtures. Their new generation fixture devices different from classical fixtures not only by design but also by its properties. In standard production are mechanical peripheries (for example fixtures) controlled and monitored by operators. In automated production must these mechanical peripheries working in automated mode too. In time of work cycle these devices works automatically, without operator intervention and cooperate with other devices of production system.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Preview
Unable to display preview. Download preview PDF.
References
Danišová, N., Fidler, B., Charbulová, M.: Návrh kontrolného zariadenia na sledovanie kvality výrobkov typu uzavretých nádob. Design of checking device for quality monitoring of products type of closed cases. Vedecké práce MtF STU v Bratislave so sídlom v Trnave 23, 21–27 (2007); ISSN 1336-1589. - Č. 23
Danišová, N., Velíšek, K.: Intelligent manufacturing and assembly system. In: Machine Design: On the Occasion of the 47th Anniversary of the Faculty of Technical Sciences. 1960-2007, pp. 413–416. Faculty of Technical Sciences, Novi Sad (2007)
Danišová, N.: Intelligence in roboted assembly. In: RaDMI 2007: Proceedings on CD-ROM of 7th International Conference Research and Development in Mechanical Industry - RaDMI 2007, Belgrade, Serbia, 16-20 September 2007, pp. 569–574. High Technical Mechanical School of Trstenik, Trstenik (2007); ISBN 86-83803-22-4
Drstvenšek, I., Ficko, M., BaliČ, J.: Relational database as a cogitative part of an intelligent manufacturing system. J. mater. process. technol. 157/158, 114–122 (2004) [Print ed.] [COBISS.SI-ID 9191446], http://dx.doi.org/10.1016/j.jmatprotec.2004.09.021
Drstvenšek, I., Ficko, M., Pahole, I., Balič, J.: A model of simulation environment for prediction and optimisation of production processes. J. mater. process. technol. [Print ed.], 155/156, 1641–1646 (2004) (November 2004), http://dx.doi.org/10.1016/j.jmatprotec.2004.04.315 [COBISS.SI-ID 8811030]
Hrušková, E.: Selection efficiency of parametrical designed elements. In: Annals of MTeM for 2007 & Proceedings of the 8th International Conference Modern Technologies in Manufacturing, 4th-5th October 2007, pp. 191–194. Technical University of Cluj-Napoca, Cluj-Napoca (2007)
Charbulová, M., Pecháček, F.: Modular clamping systems. In: RaDMI 2007: Proceedings on CD-ROM of 7th International Conference Research and Development in Mechanical Industry - RaDMI 2007, Belgrade, Serbia, September 16-20, 2007, pp. 149–153. High Technical Mechanical School of Trstenik, Trstenik (2007)
Javorová, A., Matúšová, M.: Chápadlo priemyselného robota ako upínač obrobkov (Robot gripper as a workpieces fixture.) In: Materials Science and Technology [online] (2005); ISSN 1335-9053. - Roč. 5, č. 1 [cit. 2005-03-29]
Košt’ál, P., Matúšová, M., Velíšek, K.: Modeling of clamping fixtures. In: MicroCAD 2007: Section L: Production Engineering and Manufacturing Systems / nadát. International Scientific Conference, March 22-23, 2007, pp. 109–115. University of Miskolc, Miskolc (2007)
Košt’ál, P., Mudriková, A.: Hmotné a informačné toky v pružnej výrobnej bunke (Material and data flow in flexible manufacturing cell.) In: Materials Science and Technology [online] (2007). ISSN 1335-9053 - Roč. 7, č. 3
Matúšová, M., Hrušková, E.: Modular fixture design for flexible manufacturing. In: Annals of MTeM for 2007 & Proceedings of the 8th International Conference Modern Technologies in Manufacturing, 4th-5th October 2007, pp. 267–270. Technical University of Cluj-Napoca, Cluj-Napoca (2007); ISBN 973-9087-83-3
Mudriková, A., Košt’ál, P., Velíšek, K.: Material and information flow in flexible manufacturing cell In: Annals of DAAAM and Proceedings of DAAAM Symposium. - ISSN 1726-9679. - vol. 18(1). Annals of DAAAM for 2007 & Proceedings of the 18th International DAAAM Symposium Intelligent Manufacturing & Automation: Focus on Creativity, Responsibility, and Ethics of Engineers: Croatia, Zadar 24-27th, - Viedeň: DAAAM International Vienna, 2007, pp. 485–486 (October 2007)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2008 Springer-Verlag Berlin Heidelberg
About this paper
Cite this paper
Košt’ál, P., Velíšek, K., Zvolenský, R. (2008). Intelligent Clamping Fixture in General. In: Xiong, C., Liu, H., Huang, Y., Xiong, Y. (eds) Intelligent Robotics and Applications. ICIRA 2008. Lecture Notes in Computer Science(), vol 5315. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-540-88518-4_49
Download citation
DOI: https://doi.org/10.1007/978-3-540-88518-4_49
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-540-88516-0
Online ISBN: 978-3-540-88518-4
eBook Packages: Computer ScienceComputer Science (R0)